Debossed polarity line provides visual cue to proper trac, trac connector and fixture alignment • Supplied with toggle bolts for surface mounting• Insulator stays same length as extrusion to simplify field-cutting of trac• Connectors and feeds simply push into trac sections.

The conduit feed is for surface wiring using a standard 1/2-inch connector.  Reverse polarity R34R conduit feed is designed for use in opposite polarity orientation compared to standard feed connectors.

Juno Lighting - R38 BL - Trac-Lites Live End Feed Connector - Feeds track from above with Flex or BX - 1-Circuit - Accepts standard 1/2" electrical connector - Black

JavaScript seems to be disabled in your browser. You must have JavaScript enabled in your browser to utilize the functionality of this website.

Reduced-profile, single-circuit trac sections for surface or pendant mounting. Compatible with a full range of feed, connector and mounting accessories, as listed on back of this page. Accepts all Trac-Lites and Trac-Master trac fixtures.

Construction Extruded aluminum with thermoplastic insulator • Injection molded polycarbonate dead-end with set screw • Standard lengths may becut-to-length by installer.Electrical Two 12 gauge solid copper conductors • Rated 20 amps at 120 volts • Aluminum channel used as system ground • One-pieceinsulator insures consistent conductor spacing for reliable electrical contact • Insulating bushings supplied at mounting hole locations to prevent shortsto ground.Labels UL/CUL listed.