Chinese manufacturer(brand kefa) of screw terminal blocks, spring terminal blocks, pluggable terminal blocks, barrier terminal blocks, feed through terminal blocks, transformer terminal blocks, ws din rail terminal blocks, etc. Cnkefa, ISO9001:2000, ISO14001, CE, UL, TUV, ROHS.

Mineral insulated resistance thermometers with a metal protection tube (50-WMS) are used for general temperature measurement, mostly in liquid and gaseous media at temperatures up to 600°C, on rare occasions up to 800°C.  Typical applications include refrigeration and air conditioning technology, heating, oven and apparatus construction, as well as chemical industry.

2464aao-20

High performance connectors are designed for use with 7/8³ Flexible RF cables. They are designed specifically to provide the highest quality connector-cable interface while simplifying and speeding up connector attachment. All connectors are fully tested for mechanical and electrical compliance to industry specifications. The connector meets all technical requirements and covers high frequencies as well as legacy applications.

Depending on the connection type (2-wire, 3-wire or 4-wire – in turn depending on the required measurement precision and connector length), resistance thermometers consist of 2, 4 or 6 feed lines (inner conductors), surrounded by a thin metallic protective mantle, usually made of high-grade steel.  The inner conductors are firmly press-fitted and insulated in ceramic powder. The precision resistor inside the sensor tip is connected through the inner conductors.

Specifications: * high conductivity * connector can work properly in high and low temperature environment * crimp designing makes the connector more secure, not easy to move * no need to install the driver, plug and play, hot-swappable * support system: windows xp, win 10, mac, os ect.

Due to their structure, protected resistance thermometers offer a number of advantages when compared to regular thermocouple assemblies:

1.it is the waterproof connector 2.Accoring to the standard DZ4Q/RE008-84 3.Shell size:FQ14,FQ18,FQ24,FQ30 4.Contact:each shell size have diffrent pins Working temperature: -55 degrees Centigrade- +100 degrees Centigrade Relative temperature: Temperature is 40 degrees Centigrade, reach 93í+ 3% Vibration: Frequency 10-200HZ, acceleration 150m/s2 Collide : Acceleration 490m/s2 Permanent acceleration vibration: The acceleration reaches 245mm/s2 Atmospheric pressure: Reach 4.4KPa Mechanical life-span: 500 times The connector should be able to stand the test of 30 minutes but not enter water within the connector in water 1 meter deep

Protective fittings in this product line consist of seam welded or seamlessly drawn metal tubes. The tips for the protective tubes are either closed through hot forming or welded shut with a bottom blank.

Specifications Material Specification: Housing: High Temperature thermoplastics: LCP; Color: Black Contact: Phospor Bronze/Brass Shell: Brass/Phospor Bronze/SUS301 Plated: Contact: gold plated (G/F,5U"/10U''/15U''/30U'') Shell: Gold/Nickel Materials and plating can be changed according to customer definition. Mechanical Characteristics: 1,Insertion Force:35 N Max; 2,Extraction Force:10N Min(Initial) 3,Durability Life:50000 Times. Electrical Characteristics: Contact Current Rating:0.5 Amperes Dielectric Withstanding Voltage: AC 500V r.m.s Insulation Resistance: ¡Ý100M¦¸ Contact Resistance: ¡Ü100m¦¸ Operating Temperature:-25 oC - +85 oC Environmental Spec. Have passed below tests: 1.Salt Fog Test 2.AIR Reflow Soldering Test 3.Mechanical Vibration Test 4.Adhered Tin Test 5.Temperature Cycle Test. Application: Computer, MP3 player, MP4 player, digital video and camera, PADs, GPS,flash drive and cable ASSY. 1500PCS/Reel,6000PCS/Carton.

1590AAO

Impedance 75 Product Series: BNC connector Body Plating: Nickel Connector Body Style: Straight Connector Material: Brass Contact Plating: Gold Gender: Male RoHS Certificate: Yes Contact Resistance í_ 1.5 m í_ 1mª+ Insulation Resistance í¦ 5*1000 Mª+ Dielectric Withstanding Voltage 1.5 kV rms, 50 Hz(depending on cable) . 10pcs/bag,

The gauge slide in serial-production is fitted with a Pt100 temperature sensor pursuant to DIN 60751, however versions with Pt500 or Pt1000 sensors are possible. The gauge slide is hermetically sealed.

All internationally prevalent precision resistors, detachable process connectors (for example mobile flanges or threaded sleeves) and connection heads are used.

Specifications Material Specification: Housing: High Temperature thermoplastics: LCP; Color: Black Contact: Phospor Bronze/Brass Shell: Brass/Phospor Bronze/SUS301 Plated: Contact: gold plated (G/F,5U"/10U''/15U''/30U'') Shell: Gold/Nickel Materials and plating can be changed according to customer definition. Mechanical Characteristics: 1,Insertion Force:35 N Max; 2,Extraction Force:10N Min(Initial) 3,Durability Life:50000 Times. Electrical Characteristics: Contact Current Rating:0.5 Amperes Dielectric Withstanding Voltage: AC 500V r.m.s Insulation Resistance: ¡Ý100M¦¸ Contact Resistance: ¡Ü100m¦¸ Operating Temperature:-25 oC - +85 oC Environmental Spec. Have passed below tests: 1.Salt Fog Test 2.AIR Reflow Soldering Test 3.Mechanical Vibration Test 4.Adhered Tin Test 5.Temperature Cycle Test Application: Computer, MP3 player, MP4 player, digital video and camera, PADs, GPS,flash drive and cable/PCB ASSY 100PCS/Tray,1000PCS/Bag

Din 41612 idc male/female connector Straight/right angle type Long/short body Dual/three rows 32pin 64pin Tray

1) security of the push-pull self-latching system; 2) multicore types with 2 to 32 pins; high-density installation for space-saving; 3) soldering, crimping and pcb contacts 4) straight or elbow (90 degree) 5) multiple key options to avoid mismating between similar connectors; 6) 360-degree screening for full emc protection 7)keying system(g is standard key) for connector alignment. Custom

Different insert lengths can be created by applying a process connection like a compression fitting or a mounting flange. This way, a neck tube can also be created that will stick out above the insulation. When using a neck tube, the temperature irradiation to the connection head will be limited and this will also avoid condensation forming in the connection head. These things can be important when using transmitters.

VIBRATION CONNECTORS MANUFACTURERS & SUPPLIERS Stainless steel vibration eliminator: Aeroflex Vibration eliminators are specially designed to absorb mechanical vibration and destructive force of noise which is transmitted by the compressor, and also eliminate the stresses linked with piping thermal expansion in refrigeration and air condition installation. These connectors are TIG welded stainless steel hose with copper pipe, due to there is not any brazing so these connector bear more temperature as compared to brazed fitting The main function of vibration eliminator is to absorb compressor vibration and stop its transition into pipe network, by isolating the vibration the risk of damage to pipe work and related component reduce, 1.1 Size range of vibration eliminator: The comprehensive range of vibration eliminator are available from to 3 1/8 Outer diameter of copper tube, copper tube are comply a per ASTM B88 & ASTM B88M (water & general plumbing system) & ASTM B280 (air conditioners & refrigeration system) 1.2 Material specification: Aeroflex Vibration eliminators are manufacture from EN 10028-7, Stainless steel SS 321 & SS 316L annular corrugated hose with SS 304 stainless steel braid. All unit are brazed with copper tube, detail dimension of pipe and vibration connector are in the table. All the units are ultrasonically cleaned and completely dried made suitable to refrigeration system Individual package of connector are remain under sealed plastic tubing. The maximum test pressure is 1.5 time of maximum operating pressure and minimum burst pressure is 5 time of maximum operating pressure. Copper tube end are designed as sweat connection for refrigeration tubing which have inner surface as per ASME B16.18 1.3 Installation conditions: Aeroflex vibration eliminator should be installed as close as possible to the compressor and end away from the source of vibration. Vibration eliminator should be installed perpendicular to the direction of vibration (in-line with the compressor crank shaft) Horizontal Vibration: Where source of vibration is only in the horizontal plane, a single vibration and noise eliminator may be installed. Best results will be achieved by installation at 90�° to the source which is normally the crank of the compressor in a horizontal plane. See fig. 1 Vertical / horizontal vibration: Where the source of vibration and noise is in both horizontal are in vertical planes. Best result will be achieved by installing two vibration eliminators at right angle to each other see fig. 2 Although the copper tube end of vibration absorber are attached by TIG welding (special alloy filler) during installing if unit is over heated there is not effect on the connector

ADVILUX CONNECT TECHNOLOGY is a Sullins Connector distributor in Asia. We are well known in customised and spec in for Burn-IN test in owen. Our Singapore Office has most ex-stocks item in any range or high temperatures connectors. Due to Covid-19 , we would like to seek for buyer to take over the distributorship. Those who interested to sell this brand, welcome to contact me.

This series industrial temperature sensors are available in various protection tube diameters and can be assembled with a reduced tip, depending on the desired robustness or response time. An advantage of sensors with a replaceable measuring insert is that only the inserts have to be exchanged when in need of replacement, without draining or taking the pressure off the process.

Qucik detail Place of Origin Zhejiang, China Brand Name CROP Model Number Insulation piercing connector Product name insulation piercing connector IPC connector Sample Free Material Plastic Company website www.cropgroupcn.com Quality Prime Installation Quick Certifications ISO9001 OEM Acceptable Export All over the world Business Type Manufacturer Insulation Piercing Connector for Street Lighting MODELS MAIN LINE (MM2) SERVICE LINE (MM2) BOLT NO. TORQUE REMARKS PCT13C 95/10 6-95 1.5-10 1 10NM ISO to ISO PCT13CB 95/10 (B)6-95 1.5-10 1 10NM ISO to Bare PCT13C 120/10 6-120 1.5-10 1 10NM ISO to ISO PCT13CB 120/10 (B)6-120 1.5-10 1 10NM ISO to Bare Piercing Connector for Low Voltage Aerial Bundled Cables MODELS MAIN LINE (MM2) SERVICE LINE (MM2) BOLT NO. TORQUE (NM) REMARKS PCT13C 70/35 16-70 4-35 1 15NM ISO to ISO PCT13CB 70/35 16-70 (B)4-35 1 15NM ISO to Bare PCT13C 95/50 16-95 4-50 1 17NM ISO to ISO PCT13CB 95/50 16-95 (B)4-50 1 17NM ISO to Bare PCT13C 120/25 25-120 6-25 1 17NM ISO to ISO PCT13C 150/50 50-150 4-50 1 17NM ISO to ISO PCT13C 185/35 50-185 6-35 1 17NM ISO to ISO MODELS MAIN LINE (MM2) SERVICE LINE (MM2) BOLT NO. TORQUE (NM) REMARKS PCT13C 95/95 16-95 16-95 1 17-23NM ISO to ISO PCT13CB 95/95 16-95 (B)16-95 1 23NM ISO to Bare PCT13C 150/150 16-150 16-150 1 23NM ISO to ISO PCT13CB 150/150 16-150 (B)16-150 1 23NM ISO to Bare MODELS JBC-0 JBC-1 JBC-2 PCT23C 240-240 Main Line(mm2) 25-70 35-70 35-150 50-240 Service Line (mm2) 6-35 6-35 35-150 50-240 Bolt No. 1 1 1 2 Torque (Nm) 10NM 13NM 17NM 23NM Remarks ISO to ISO ISO to ISO ISO to ISO ISO to ISO

1.LEMO connector, mini connector 2.copy of the lemo connector, but the technist can meet the requirement 3.shell size:0,1,2 The circular electronic connector are designed for the connection between sensors and electronic instruments or equipments .The connector is compact and its push-pull elf-laching connecting system allows the connector to be mated simply

24V LV MX24 Connector System for LED lights The mini connector system is a 2 pole appliance wiring system,developed for the cabinet LED lighting,furniture LED lighting,LED strips.It includes the coupling(plug&socket),2-way distributor (one side),4-way distribut or 6-way distributor(one side) and 12-way distributor as well as two PCB sockets. All distrbutors have parallel and series circuits. Connection:max.3A,24V Cable:VDE H03VVH2-F 2*0.75mm or LIYZ 2*0.34mm

A full range of board to board connectors in 0.5mm, 0.8mm, 1.0mm, 1.27mm, 2mm, 1.27mm x 2.54mm, 2.54mm, 3.96mm and 5.08mm pitches.

For specialised applications (precision, long-term stability, etc.) we recommend the application of precision resistors with narrowed tolerance.