1/3 - 2 HP. 1800 RPM. 115/230 volt - 60 Hz. TEFC enclosure - IP54 degree of protection. High torque. 1.15 service factor. Class F insulation. VPI copper windings. Rigid base - 56H. Capacitor start / induction run (1/3 - 1 HP). Capacitor start / capacitor run (1.5 - 2 HP) for reduced amperage and... [See More]

Designed as a smart alternative to the X13, the new Endura Pro features a constant torque 48 frame ECM. When compared to the X13, Endura Pro delivers a series of on-going improvements in multiple areas, plus increased overall reliability. All applications featuring the X13 now use the Endura Pro... [See More]

1/3-2 HP. 3600 and 1800 RPM. 208-230/460 volt. TEFC enclosure - IP56 degree of protection. 1.15 service factor. Class F insulation. C-face - rigid base and round body. 304 stainless steel frame, end bracket and junction box. Stainless steel shaft. Double lip seals on both ends of the motor with an... [See More]

ECM 142R is the next generation of high-efficiency, fractional-horsepower outdoor motors. 142R is ideally suited to outdoor applications such as split system outdoor units, package units, or any other prop fan air-moving that requires a 1/5, 1/3, 1/2 or 3/4 horsepower, 300-1200 RPM motor. [See More]

Our Z cylindrical-rotor motors perform a wide variety of industrial drive tasks – reliably and effectively. They are suitable for a broad range of applications, offering outstanding performance: motor output up to 72 HP (45 kW). inverter-fed drives for travel applications, line-fed travel and... [See More]

Evergreen IM is high-efficiency ECM replacement motor that is designed to replace factory PSC blower motors in HVAC systems. That means you can now offer your customers the comfort and efficiency of ECM in an easy-to-install replacement motor. Built from the same trusted, field-proven ECM technology... [See More]

Overview. Boston Gear offers a wide range of ODP (open drip proof) AC motors, including brake motors. These motors are offered in C-Face models for mounting to our enclosed gear drives, and they are available in 1/6 - 20 HP and cover voltage ranges from 115 VAC to 460 VAC. These motors are ideally... [See More]

Widely used in industrial applications. Robust, with comparatively simple structures, and can run on industrial power. Our lineup features a wide-variety of motors from the standard series to the applied series to match with equipment in a wide variety of fields for industrial use. [See More]

1/4 - 30 HP. BlackMAX inverter (Vector) duty motors offer 1000:1 constant torque (TENV). This three phase motor is designed for inverter or vector applications where up to 1000:1 constant torque speed range is required. Typical uses include: Material handling, machine tools, conveyors, crane and... [See More]

Can run on residential power. Robust, with comparatively simple structures, and can run on commercial or residential power. We offer a wide variety of models that can be used in equipment as dedicated motors in every field for both consumer and industrial use. [See More]

The Johnson Electric Universal motor series is an industry benchmark for many applications including home technologies, personal care and power equipment. The Quattro Pole product line sets a new performance standard by providing a 30% improvement in power density. This range of Universal and... [See More]

1/2-30 HP, vector duty. The SyMAX ® motor is the next generation of technology in motor efficiency and performance. The SyMAX permanent magnet AC motors offer unique solutions for today ’s demanding applications. This product ’s unparalleled power density, unprecedented performance,... [See More]

Bison Series inverter gearmotor. Gearhead Specifications. Housing: High Pressure Die Cast Aluminum. Shaft: Hardened Steel. Lubrication: Lifetime Oil Bath. Mounting: All Position Mounting. Gearing: All Steel AGMA Class 9, 1st Stage Helical Metal, Balance Spur Metal. Bearings: Needle and Ball... [See More]

1/3-2HP. 3600 RPM. 115/208-230 volt. TEFC enclosure. 1.15 service factor. Class F insulation. C-face - removable base. 304 stainless steel threaded shaft. Capacitor start / induction run (1/3 - 1 HP). Capacitor start / capacitor run (1.5 - 2 HP). for reduced amperage and high torque. VPI copper... [See More]

1/3-2 HP. 3600 and 1800 RPM. 115/208-230 volt. TEFC enclosure. 1.15 service factor. Class F insulation. C-face - removable base. Capacitor start / induction run (1/3-1 HP). Capacitor start / capacitor run (1.5-2 HP) for reduced amperage and high torque. Shaft slinger to keep moisture and... [See More]

Rigid Base: 1/2 - 2 HP; 1800 RPM. 1/3-3 HP. 3600 and 1800 RPM. 208-230/460 volt. TEFC enclosure. 1.15 service factor. Class F insulation. C-face - removable base. Shaft slinger to keep moisture and contaminants from the drive-end bearing. Inverter duty. Suitable for 50 hz operation with 1.0 service... [See More]

Overview. Boston Gear offers a wide range of TENV (totally enclosed, non-ventilated) AC motors that are ideal for environments where dirt or dust would contaminate a TEFC model motor. They are available in both C-face, for mounting on our enclosed gear drives, or in rigid base models. The NEMA... [See More]

The WSS Series stainless steel motors are 3-phase industrial grade washdown duty motors made with 300 grade stainless steel housing. These fractional HP motors come in sizes from 1/3 to 2 H.P. and are available with a double reinforced welded 56H base or without a base in the round body style. [See More]

Motor Design: Capacitor-Start. Motor Enclosure Design: Totally Enclosed Fan-Cooled. HP: 1/2. Nameplate RPM: 1725. Frame: 56. Voltage: 115/208-230. Hz: 60. Phase: 1. Full Load Amps: 8.0/4.0-4.0. Number of Speeds: 1. Mounting: Base. Motor Thermal Protection: Auto. Insulation Class: B. Service Factor:... [See More]

Overview. Boston Gear offers a wide range TEFC (Totally Enclosed Fan Cooled) AC motors. These motors are offered in both C-Face for mounting to enclosed gear drives and in rigid base models. These NEMA design B motors are available from 1/6 - 75 HP and cover voltage ranges from 115 VAC to 575 VAC. [See More]

MR-J4 family of products leverages cutting edge technology to provide a high functionality, high performance solution with the most flexible amplifier in the Mitsubishi Electric lineup. This family of products has been designed with the user experience, machine performance, and the environment in... [See More]

Y2 series three-phase asynchronous electric motors, developed with new techniques, are energy-saving products in strict conformity to the IEC standard. Y2 series motors are defined as totally enclosed, fancooled, squirrel cage type and have such good features as novel design, beautiful modeling, low... [See More]

ARC Systems, Inc. offers custom fabricated Induction motors ideal for various applications such as: Pump, Fans, Hydraulics, Machinery, Actuation Systems, Medical, Aerospace and Industrial. [See More]

The new Eon ™ motor is a drop-in upgrade for the original ECM 2.3 motor. The motor is commonly used in applications in residential HVAC furnaces and air handlers, commercial variable air volume systems and fan filter units. Eon is a lighter, more compact variable speed ECM that is backward... [See More]

Bison Series split phase gearmotor. Gearhead Specifications. Gearing:: Phenolic High Speed & Steel. Lubrication:: Grease Filled. Bearings:: Ball Bearings on Gear Case & Motor. Castings:: Zinc Die Cast. Features. Mounting:: All Position. Rotation:: Reversible. Seals:: Lip Seal on input &... [See More]

A premier line of industry-leading AC and DC motors and generators that drive innovation in industries from petroleum and paper to mining and marine propulsion. [See More]

Specification: Ziehl-Abegg external rotor motors combine the advantages of compact and space saving construction with the proven drive concept of a wear-free squirrel cage motor. 9 frame sizes are available in an output range of 0.1 to 7 kW and 2 constructional designs for flange or axis fastening. [See More]

The Demag KB conical-rotor brake motor provides you with a brake motor that utilizes a unique operating principle: The brake is not separately controlled, but firmly connected to the rotor, i.e. integrated. This means that motor start-up and brake release as well as motor switch-off and brake... [See More]

Highly reliable. Highly efficient. And now, highly available. Genteq's Evergreen EM is designed by OEM motor experts to replace X13 motors quickly and easily. Evergreen EM is preprogrammed to provide the same comfort, low utility bills and air quality as the OEM X13 ECM motor with less hassle for... [See More]

The Motors & Drives division offers a full range of low and medium voltage motors and adjustable speed drives. These products, hallmarked for quality, performance, and durability, can be customized to meet the most demanding applications. TIC entered the electric motors market in 1970 and has... [See More]

The Fasco 5.6" diameter Permanent Split Capacitor (PSC) Motors are general replacement direct drive blower motors that feature an open ventilated design, thermal protection, shielded ball bearings, reversible rotation, and are UL recognized and CSA certified. [See More]

Bison Series inverter gearmotor. Gearhead Specifications. Housing: High Pressure Die Cast Aluminum. Shaft: Hardened Steel. Lubrication: Lifetime Oil Bath. Mounting: All Position Mounting. Gearing: All Steel AGMA Class 9, 1st Stage Helical Metal, Balance Spur Metal. Bearings: Needle and Ball... [See More]

1/8 - 10 HP; 1800 RPM. MicroMAX inverter (Vector) duty motors offer 1000:1 constant torque (TENV), 20:1 constant torque (TEFC) in a totally enclosed design. This three phase motor is designed for direct replacement of PMDC or any other variable speed applications where up to 1000:1 constant torque... [See More]

Motor Design: Split-Phase. Motor Enclosure Design: Open Dripproof. HP: 1/2. Nameplate RPM: 1725. Frame: 56. Voltage: 115. Hz: 60. Phase: 1. Full Load Amps: 8.1. Number of Speeds: 1. Mounting: Base. Motor Thermal Protection: None. Insulation Class: B. Service Factor: 1. Max Ambient Temperature: 140C. [See More]