Hudson SprayerReplacementparts

Chain drives, dies, hand wheels, movable metal-to-metal contact surfaces, rack and pinion locations, and rollers must be adequately lubricated. Certain parts of the machine are left unpainted to aid in the movement of the slide assembly when changing dies, etc. Keep these areas clean and coated with a light grease.

Smith Performance Sprayers 182941 #12 Brown Poly Conical Nozzle Tip with Ceramic Insert: .20 GPM- 80° FAN; TXVK12 SKU # 182941

Hudson Sprayer partshome depot

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices.

*DEWALT. DEWALT® and GUARANTEED TOUGH® are registered trademarks of the DEWALT Industrial Tool Co., used under license. All rights reserved. The yellow and black color scheme is a trademark for DEWALT Power Tools and Accessories. | CRAFTSMAN. CRAFTSMAN® is a registered trademark of Stanley Black & Decker, Inc., used under license. | BLACK & DECKER. The Black & Decker Corporation, and the BLACK+DECKER logos are registered trademarks of The Black & Decker Corporation and are used under license. | SCOTTS® & MIRACLE-GRO® are a registered trademark of OMS Investments, Inc. and is used under license. | Roundup® and Roundup & Design are registered trademark used under license from Monsanto Technology LLC. | Viton® is a registered trademark of E.I. Dupont de Nemours & Co. | TeeJet® is a registered trademark of TeeJet® Technologies and Spraying Systems Company | BLACK FLAG™, BLACK FLAG®, CUTTER®, and REPEL® are trademarks of United Industries Corporation.

Hudson Backpack Sprayer parts diagram

Smith Performance Sprayers 182940 #10 Black Poly Conical Nozzle Tip with Ceramic Insert: .16 GPM- 80° FAN; TXVK10 SKU # 182940

RoundupBackpack Sprayer Partslist

You should ensure that proximity sensor heads are kept clean and free of lubricant. Dirty sensor heads will affect system operation. Consult with the machine operator regarding changes in the operating characteristics of the machine, unusual noises, or erratic operation, all of which might signal trouble.

Smith Performance™ 182886 PVC Hose and Poly Shut-Off Kit for NL400 and NL401 Backpack Sprayers (Ref# 183176) SKU # 182886

Hudson Sprayer partslist pdf

Smith Performance Sprayers 182939 #8 Gray Poly Conical Nozzle Tip with Ceramic Insert: .13 GPM- 80° FAN; TXVK8 SKU # 182939

As a general rule of thumb, the machine should be visually inspected daily. Perform periodic inspections of all electrical, pneumatic and mechanical systems to ensure proper operation.

Smith Performance™ 182897 Poly EPDM Pump Assembly with Steel Pump Rod for 190450 Acetone Sprayer (Ref# 182528) SKU # 182897

SoloBackpack Sprayer Parts Diagram

To ensure that your HVAC Machinery systems are kept in correct operating condition, they must be inspected and maintained on a regular basis. Proper cleaning and/or replacement of filters, periodic lubrication of bearings, bushings, chains, and other moving friction- and wear-generating points will prevent damage or failure and provide optimum performance. Your maintenance technician must become familiar with all the lubrication points located throughout the line.

Below is a list of recommended types of lubricants used to maintain the processing line. The lubrication schedule that follows was developed as a general guide. However, the actual lubrication requirements for your line and for individual points will be determined by line setup, usage levels, and equipment environment, and may vary.

Lubricant recommendations are based on an ambient temperature of 40°–100°F (4–38°C). When using a low-pressure grease gun, lubricate only to the point of grease beginning to emerge from the edges of the seals. Do not over lubricate chains. Chain drives should not be lubricated to the point that oil is thrown off during operation.

Thorough visual inspection of components and systems should also occur during lubrication procedures. Check the equipment for loose fasteners, parts out of adjustment, or other deficiencies. It's recommended to correct all problems when discovered and still small, before they become operational problems.

Hudson Sprayer partsList

Every 30 days, clean the area around each grease fitting. Using a low pressure grease gun, pump new lithium or synthetic-base general purpose grease (Texaco MARFAK multipurpose #2 or the equivalent) into the fittings.

You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website.