Best3.0 v lithium battery

I used this to replace an old battery in ELPGS03 glasses. This one was the exact replacement. The order was easy to do and delivery process was fast even to Finland.

Both my Epson 3D Glasses went in to problems with the charging after a few years. Original batterys where just 30mAh. After som googling I found these. With a bit of patience I manage to take the glasses apart and change the battery inside. Now they working perfect again and with 70mAh I don't need to charge them as often as the old ones. Thanks to Tiny Circuits for the fast shipping.

3.0 v lithium batteryprice

70mAH batteries should not be charged with a TinyScreen plus, as the charge current is too high (200mA). They should be charged using a standard TinyDuino Processor or Tiny Battery Charger (100mA).

3VLithium BatteryCR2032

Enter your name * Enter your email address * By checking this box, I agree to receive future editions of 3GPP Highlights by email. Subscribe Message

This page lists the 3GPP Technical Specifications and Reports developed specifically as a result of the above work item. Click on the spec to open its web page.

This lipo battery includes a micro JST SH connector, which is used on TinyCircuits products that support Lithium-ion batteries.

This is a tiny rechargeable Lithium-ion polymer battery that fits perfectly behind the TinyDuino Processor board to power your projects. The lipo battery has a capacity of 70mAh at 3.7V, the voltage can range from 4.2V when fully charged to 3.0V when completely discharged. The battery includes protection circuitry to protect the battery from overcharging or completely discharging.