MaxPreps

Hhea table

• Auxiliary output on the X axis is turned on, which could turn on the cutting torch or laser starting the cut at the center of the circle. • A half circle is cut from the center to the outside of the hole positioning the cutting tool at the start of the hole. • The hole is then cut, the torch turned off, the stage stopped and the contour definition completed. • The stage is then positioned and the contour definition executed. The following would be input from the host...

That's why we are now performing some routine maintenance on our website. We'll be up and running again on Saturday, October 19, no later than 12:00 p.m. ET. If you have an emergency and need help from Henry Schein, please call 1-800-668-5558. Until then, many thanks for your patience. Stay safe, be well, and please remember to wash your hands.

C'est pourquoi nous effectuons actuellement des travaux de maintenance périodique sur notre site Web. Il sera à nouveau opérationnel le samedi 19 octobre, au plus tard à 12 h, heure de l'Est. En cas d'urgence ou pour de l'assistance d'Henry Schein, composez le 1-800-668-5558. Entre-temps, nous vous remercions de votre patience. Faites attention à votre sécurité, prenez soin de vous et n'oubliez pas de vous laver les mains.

MAXpMAXp Additional Features - All communication via Device Driver and Driver Support DLL. - Dual Port RAM is utilized for high-speed communications - PCI 33 MHz Target Device - Independent and coordinated motion of all axes. - Slip & Stall detection with encoder feedback. - Patented technology to minimize torque ripple and velocity modulation. - Many control signals are opto-isolated. - Independent home, positive and negative over-travel inputs. - Non-volatile macro storage, parameter storage. - Linear/Circular interpolation - Constant or Variable Velocity contouring (all axes) - 120 Pin I/O Breakout Module - Field upgradable firmware - Firmware upgrades and enhancements - Customizable solutions available for your requirements - Example programs and application code provided - Web page support for downloading software and documentation - Person to person toll-free tech support -call 800-707-8111 Intelligent 8-Axis Motion Controller for PCI • PID update rate of 122 ^s on all 8 axes Delivers exceptional servo control on multi-axis applications. Identical outcomes when utilizing one or all axes of motion. Configurable PID filter with feedforward coefficients. • 266 MHz, 32-bit RISC processor Updates all signals and data points providing superior application control. An order of magnitude faster than our competition. • 64k Shared Memory Permits rapid data transfer to & from controller. Large size accommodates expandability to unique and custom applications. • PCI Universal Bus - 3.3 or 5.0 volts PCI Rev 2.2 compliant. Compatible with current and future PCI bus computers. • Memory 32 Mb System Memory. • Controller I/O Capabilities 4 Channels of general purpose Analog Input, with 16 bit, +/-10 VDC input Up to 8 Analog outputs, +/- 10 VDC output 16 user-definable digital I/O Home and Limit for each axis • Motion Feedback Support Quadrature Encoder Feed back up to 16 MHz. • Sophisticated Control Functionality 16 bit DAC analog resolution. Step pulses from 0 to 4,176,000 steps per second (+/- 0 steps). Backlash compensation. Custom, Parabolic, “S”-curve & Linear trajectory profiles. Real time encoder position capture. S-Curve with 4-quadrant jerk parameters. • Control signals Opto-isolated Digital I/O. High density shielded 120 pin connector

DESCRIPTION The MAXp is a full length PCI bus motion controller that conforms to the PCI Local Bus specification, rev 2.2. The MAXp is capable of up to 8-axis of control of which each axis can be configured as an open loop stepper, a closed loop stepper, or a servo axis. The MAXp is powered by a PowerPC processor. This high performance processor provides a 64-bit Floating Point processor and is clocked at 266MHz. This provides the MAX with the pure processing power to update every signal of the controller, i.e. I/O bits, direction, limits, etc., at rates of 122gs. The MAXp supports 16...