Please note: The QUICK-PAK electrodes will only work when connected with the included CHARGE-PAK. The CR Plus' internal battery is used to maintain, monitor, and operate the device functions while the CHARGE-PAK provides the necessary power for actual defibrillation treatment.

On Sunday 18th October I witnessed a near miss RTC at the junction of Longfellow Road with Wesley Avenue Westfield. A car came out of the cul de sac part of Longfellow Road without regard for a car approaching from the opposite direction and intending to follow the main road into Wesley Avenue as it priority to do.Due to the failure of the car from the cul de sac to slow down or stop it had to do an emergency stop to avoid a collision which had the potential to have serious consequences. The problem appears to be that the road markings which were recently put down to show priority of the main road are worn away. May I suggest that proper give way markings, which other side roads have, are painted on the road along with the appropriate give way sign warning motorists of the junction priority ahead. Hopefully, this could avoid any future near misses as you are aware of the parking problems with the schools using these roads as school car parks.

When removing an old CHARGE-PAK, please wait at least 30 seconds before inserting the new one otherwise the device may enter a fault state. For more guidance on replacing the battery, please view the Installation Instructions.

With a stand-by life of 2 years and the same replace-by date, the Physio-Control Lifepak CR Plus CHARGE-PAK and electrode kit provides a complete pack to easily replace components that have expired or have been used. Available to purchase with 1 or 2 pairs of QUICK-PAK electrodes, the replacement kit is designed for use in conjunction with the Physio-Control Lifepak CR Plus Fully Auto and Semi-Auto Defibrillators.