Very similar in design and function to the 16 Amp versions, the E618 32 Amp model is designed for use with higher power equipment such as amplifiers. The front panel is fitted with one 32 Amp CEEform inlet and a directly wired loop-out outlet, 2 x 20A Powercon outputs and either one UK 13 Amp or Shuko 16A output, plus overcurrent thermal circuit breakers and LED "traffic light" power status indicators as per the 16 Amp models.

Choose products to compare anywhere you see 'Add to Compare' or 'Compare' options displayed. Compare All Close

The LDX-36010-35 High Power Laser Diode Driver is a 10A and 35V current source that offers CW, QCW, and Hard Pulse Output with multiple levels of laser diode protection. In QCW mode the LDX36010-35 can output up to 20A at 35V. In addition the LDX3601035 features 4-wire voltage measurement, photodiode measurement, and a trigger in and out. For automated testing applications in an R&D or production environment, remote operation is easily accomplished through the GPIB/IEEE-488 interface. For virtual instrument programming, LabVIEW® instrument drivers are available free of charge. LabVIEW® instrument drivers can be downloaded from the Literature and Downloads tab on this page. How are you mounting your laser diode?

This range of modern 1U and 2U rack-mounting panels and floor boxes have been engineered by Canford specifically to provide a versatile, robust and safe solution suitable for powering a diverse combination of equipment. They are more commonly used in mobile racks and flight cases for temporary installations in live entertainment, including theatre, touring systems, location recording and outside broadcast work, though their unique design and configuration makes them also equally suited to many fixed installs.

These 2U units are constructed from a substantial steel enclosure and come fitted with a 16 Amp CEEform inlet for power in and a directly wired loop-out outlet to supply additional panels mounted in other enclosures. This means that several mobile racks may be powered from a single source. Alternatively power may be fed off to suitable distribution strips.

For automated testing applications in an R&D or production environment, remote operation is easily accomplished through the GPIB/IEEE-488 interface. For virtual instrument programming, LabVIEW® instrument drivers are available free of charge. LabVIEW® instrument drivers can be downloaded from the Literature and Downloads tab on this page.

All models have LED "traffic light" indicators to show Supply Present, Earth Present and Neutral Fault status which can be disabled via a rocker switch for low light on stage use and to enable PAT testing. BS1363 13 Amp mains outlets are arranged to avoid power cords interfering with adjacent hardware and also support the use of plug-top power supplies. All output connectors are wired via overcurrent thermal circuit breakers. Earth grounding points feature on the rear of all models as standard. 100mm depth rear steel enclosure.

Yes, opt-in.  By checking this box, you agree to receive our newsletters, announcements, surveys and marketing offers in accordance with our privacy policy

A choice of 20 Amp Powercon, 16 Amp Powercon TOP and 10Amp locking IEC input and output connector options housed in a compact robust, 1U steel enclosure for ‘on the road’ applications where size and weight considerations are paramount.

A unique feature of the 16 Amp versions is the recess above the inlet connector which allows the sprung cap of the mating CEEform cable socket to fit into the panel, avoiding interference with the equipment above and providing the latching facility necessary to avoid accidental disengagement of the connector.

All models have LED "traffic light" indicators to show Supply Present, Earth Present and Neutral Fault status which can be disabled via a rocker switch for low light on stage use and to enable PAT testing. All output connectors are wired via overcurrent thermal circuit breakers. Earth grounding points feature on the rear of all models as standard. 100mm depth rear steel enclosure.

The LDX-36010-35 High Power Laser Diode Driver is a 10A and 35V current source that offers CW, QCW, and Hard Pulse Output with multiple levels of laser diode protection. In QCW mode the LDX36010-35 can output up to 20A at 35V. In addition the LDX3601035 features 4-wire voltage measurement, photodiode measurement, and a trigger in and out.

The rear panel offers 12 x 10 Amp overcurrent protected locking IEC outputs with an overall current limit of 10 Amps, plus 12 x 20 Amp overcurrent protected Powercon outputs with an overall current limit of 20 Amps. 100mm depth rear steel enclosure.