Comfort Zonefans Customer service

The Comfort Zone CZ6C is a small, compact 6” fan that can be clamped onto multiple surfaces. The CZ6C comes with a two-speed switch and an adjustable tilt. The external casing consists of a grey plastic, with a removable safety grill over the fan blade.

Comfort ZonePersonalFan

If the fan is not turning on, verify that your power cable is plugged in tightly. Also, verify that your source of electricity (the power outlet) is functional. Finally, check if the power cable shows any signs of damage (i.e. cuts in the rubber coating that expose the wire).

Comfort Zone20 Inchfan

If the fan does not appear to turn on, there may be loose wiring. Loose wiring can result from the fan being dropped or mishandled, which in turn may damage the internal wire connections.

If our clamp breaks or is having trouble staying on the surface you wish to attach it to, it may be faulty or broken. After extensive use, the fan’s clamp may break.

If the fan blades are not spinning or are spinning slowly and you are certain the blade is not blocked by any dirt, then you will need to replace the motor.

Over an extended period of use, hinges can become loose and will need to be tightened. You will use a Philips screw driver on the loose screw until it is tight.

If the fan turns on and can change speed but can not reach its max speed there may be a blockage in the fans track. If the fan blade is experiencing a blockage, then the best solution is to clean the collection of dirt, hair, etc. blocking the fan blade.

If the fan turns on but you have trouble switching speeds, there may be a faulty switch. It is not uncommon for a component such as a switch to be faulty due to poor manufacturing. Components of a product can deteriorate after an extended period use, thus becoming faulty.

Comfort zone fanreview

If either of the two exposed wires look like they have become loose or disconnected, then you will have to reconnect these wires.

Comfort ZoneWiFiFan

If the fan does not appear to turn on, there may be loose wiring. Loose wiring can result from the fan being dropped or mishandled, which in turn may damage the internal wire connections.

If the fan turns on but you have trouble switching speeds, there may be a faulty switch. It is not uncommon for a component such as a switch to be faulty due to poor manufacturing. Components of a product can deteriorate after an extended period use, thus becoming faulty.

If either of the two exposed wires look like they have become loose or disconnected, then you will have to reconnect these wires.

If the fan turns on and you have the ability to change its speed but is having trouble reaching its max speed, there may be a blockage in the fans track. If the fan blade is experiencing a blockage, then the best solution is to clean the collection of dirt, hair, etc. blocking the fan blade.

Comfort Zone30 inchFan

Did you ever find out? Mine just turned off one day and wont come on. When I unplugged it and plugged it back in it beeped,, but other than that no lights or anything turn on.

If there happens to be a faulty switch, then you will need to replace the switch. Refer to Comfort Zone CZ6C Switch Replacement guide.

If there happens to be a faulty switch, then you will need to replace the switch. Refer to Comfort Zone CZ6C Switch Replacement guide.