H2Hcompany

In our new approach, these areas show as 'Regulations met'. This means that we haven't found any breaches of the regulations for that area. For older reports, they are labeled as 'No action'. In both cases, our judgement means that we are not demanding change from the provider of the service for this area.

In older reports, a red cross means we are taking enforcement action against the provider because of breaches of the regulations we have found. In our new approach, we show enforcement separately from the assessment judgement so you won't see a red cross displayed.

H2h healthcarereviews

We don't rate every type of service. Some services - like dentists - we don't have the legal power to rate. For these services, we show ticks and crosses to explain where we have found that action needs to be taken. Our approach changed in June 2024 so our reports from before that have slightly different wording.

In our new approach, these show as 'Not all regulations met'. This means that we found at least one regulation had been breached in this area. For older reports, you will see a label of 'Improvements required'. In both cases, we expect the provider to make changes to the service.

H2h healthcarecna

VX IT, 19" mounting angles, standard, front and rear, vented, WHD: 800 x 1200 x 800 mm, 24 U Dimensions: Width: 800 mm Height: 1,200 mm Depth: 800 mm 24 U Free mounting space to the 482.6 mm (19") level, front/rear 150 mm / 520 mm Mounting position of the 482.6 mm (19") level front and rear Distance between levels as delivered 520 mm 482.6 mm (19") attachment on the cross-member, screw-fastened at the top and bottom Material: Sheet steel Aluminium Surface finish: Enclosure frame: Dipcoat-primed Interior installation: Spray-finished Rear door and roof: Dipcoat-primed, powder-coated Front door: Aluminium, anodised/spray-finished Colour: Enclosure frame, rear door and roof: RAL 7035 Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005 Interior installation, vent grille at the front: RAL 9005 Handle and hinges: RAL 9005 Design: Standard Cover version multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate Mounting angle version 482.6 mm (19") mounting angles, standard in the VX IT Base design Open 482.6 mm (19") level(s) version front and rear Load capacity: 8,000 N Max. load capacity (static) per enclosure to UL 2416 EAN 4028177944831 ETIM 7.0 EC011217 ECLASS 8.0 27180207

H2h healthcarecourses

VX IT network/server enclosure, vented, for room climate control. 482.6 mm (19") interior installation with depth-variable 482.6 mm (19") mounting angles in the standard version, available in a range of size variants. The solution for all network and server applications. Whether you need a network rack to house a distribution board, or server racks for an edge, colocation or hyperscale data centre, the new VX IT is the ideal platform for accommodating a modern IT infrastructure and its many different requirements. The new VX IT is based on a modular concept with a customer-friendly configurator to guide you quickly and easily to a solution that is tailored to your individual requirements.

Not rated – we have not yet rated this area of the service, this is normally because the assessments we have carried out have been focused on other key questions.

H2HSolutions

For all providers except NHS trusts, our assessments are published on the profile pages for the individual services they run. You can find the details of these for this provider on the Services page of this profile.

Browser Support We recommend using one of the following browsers: Chrome, Firefox, Edge, Safari. Any other browser may experience partial or no support.

Supply includes: VX enclosure frame with doors and roof plate Aluminium/sheet steel door at the front, vented (vented surface area approx. 85% perforated), 180° hinges Sheet steel rear door, vented (vented surface area approx. 85% perforated) Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E Mounting angles, 482.6 mm (19") Spacers, height 50 mm, to raise a cover plate above the fan cut-out in the roof plate, for passive cooling (supplied loose). Not required for variants without a cut-out. 12 x 482.6 mm (19") fastener, 1 U, conductive (supplied loose) 25 multi-tooth screws, conductive (supplied loose) IPPC pallet Roof plate, multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate Sheet steel door, vented, one-piece, 130° hinges * Please note Rittal cabinets product codes do not include side panels as standard. If baying or non baying Divider panels or Side panels are available as an extra option. See comptible parts

Requires improvement – the service isn't performing as well as it should and we have told the service how it must improve.