Power ratings115 Volt power outlet: 90 to 132 V ac rms, 47 to 63 Hz, 20 A maximum230 Volt power outlet: 180 to 264 V ac rms, 47 to 63 Hz, 16 A maximum

Temperature Requirements: 10 ºC to 40 ºC (50 ºF to 104 ºF) when operating; -20° C to 60° C (-4 °F to 140 °F) in storage.Humidity: 10% to 90% non-condensing when operating; 5% to 95% non-condensing in storage

Calculated molecular properties are available for small molecules and natural products (not peptides). Properties were generated using the CDK toolkit. All properties were selected to enable the prediction of the Lipinski Rule-of-Five profile or ‘druglikeness’ for each ligand. For more info on each category see the help pages.

SMILES (Simplified Molecular Input Line Entry Specification) A specification for unambiguously describing the structure of chemical molecules using short ASCII strings. Canonical SMILES specify a unique representation of the 2D structure without chiral or isotopic specifications. Isomeric SMILES include chiral specification and isotopes. Standard InChI (IUPAC International Chemical Identifier) and InChIKey InChI is a non-proprietary, standard, textual identifier for chemical substances designed to facilitate linking of information and database searching. An InChIKey is a simplified version of a full InChI, designed for easier web searching.

Just-right feature set includes ECG, pacemaker, arrhythmia and performance testing, respiration, invasive blood pressure, temperature, cardiac output (ProSim 3 only), fetal/maternal (ProSim 3 only)

Impulse 7010 Defibrillator Selectable Load Accessory provides multiple loads of 25 Ω, 50 Ω, 75 Ω, 100 Ω, 125 Ω, 150 Ω, 175 Ω, and 200 Ω to comply with IEC 60601-2-4 standard (optional)

Reduce testing time with built-in line sensors which automatically test humidity temperature and oxygen while compensating for atmospheric pressure and environmental conditions

Storage of Results: Test results stored for later viewing, printing or transfer to PC. Typical practical capacity: 100 tests

DPM4 Parameter Tester is a highly accurate meter, ideal for testing done as part of preventive maintenance or repair processes whenever measurement of pressure, flow, or relative humidity is required. The DPM4 tests and calibrates flow and pressure generators used in many medical devices. With several measurements combined in a single, handheld device, the DPM4 provides a cost-effective solution, eliminating the need for multiple test meters.

Temperature Requirements: 10 °C to 40 °C (50 °F to +104 °F) when operating; -25 °C to +50 °C (-13 °F to +122 °F) when in storage.Humidity: 10 % to 80 % non-condensing

Storage of Results: Test results stored for later viewing, printing or transfer to PC. Typical practical capacity: 100 tests

Portable: Featherweight design, functional strap, and tilt stand make it easy for transportation and operation on-the-go (onsite or offsite)

Streamline your testing procedure, reduce errors, and quicken your test time with the ability to create customized test profiles

Power ratings115 Volt power outlet: 90 to 132 V ac rms, 47 to 63 Hz, 20 A maximum230 Volt power outlet: 180 to 264 V ac rms, 47 to 63 Hz, 16 A maximum

EnvironmentalAgency Approvals: CE, CSA, Australia RCMSafety: IEC 61010-1: Overvoltage Category II, Measurement 300V CAT II, Pollution Degree 2Electromagnetic Environment: IEC 61326-1:PortableEmissions Classification: IEC CISPR 11:Group 1, Class A.

The 8-in-1 ProSim 8 Vital signs simulator offers fast and comprehensive preventative maintenance (PM) testing with one device in less than five minutes, reducing average test time by up to 88% and ensuring your devices provide the ultimate in-patient safety. The ProSim 8 patient simulator is also ideal for design engineers looking for a known physiological signal output.

Temperature Requirements: 15°C to 30°C (59°F to 86°F); -20°C to +40°C (-4°F to +104°F) when drained of all liquid.Humidity: 10 % to 90 % non-condensing when operating; 5 % to 95 % non-condensing in storage.

The VT900A + VAPOR Ventilator and Anesthesia Test duo is designed to efficiently and reliably perform a full anesthesia machine PM, from ventilators to vaporizers, and automatically detects the 5 major anesthetic agents, CO2, and N2O, and identifies them by their international color code for easy identification.

The Impulse 7000DP Defibrillator/Transcutaneous Pacemaker Analyzer ensures proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment. The Impulse 7000DP is superior in compliance, technology, efficiency and ease of use.

Temperature Requirements: 10 ºC to 40 ºC (50 ºF to 104 ºF) when operating; -20° C to 60° C (-4 °F to 140 °F) in storage.Humidity: 10% to 90% non-condensing when operating; 5% to 95% non-condensing in storage

Temperature Requirements: 10 °C to 40 °C (50 °F to +104 °F) when operating; -25 °C to +50 °C (-13 °F to +122 °F) when in storage.Humidity: 10 % to 80 % non-condensing

Storage of Results: Test results stored for later viewing, printing or transfer to PC. Typical practical capacity: 100 tests

Two-year extended warranty (no-cost available after first-year calibration at any authorized Fluke Biomedical Service Center)

ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing.

Quickly access menu options interpret results and see measurements at a distance up to 6’ (1.8 m) with the large easy-to-read 7 (17.8 cm) color touch screen

Portable: Featherweight design, functional strap, and tilt stand make it easy for transportation and operation on-the-go (onsite or offsite)

The INCU II Neonatal Warmer is an all-in-one Incubator/radiant neonatal warmer analyzer that simplifies testing and ensures proper performance and safety of infant incubators, transport incubators and radiant neonatal warmers by complying to global standards. Protect a baby’s safety by regularly performing all necessary preventive maintenance tests on infant incubators and radiant warmers. Life matters. Testing matters.

The IDA-1S measures the flow rate and volume delivered, and the pressure generated in occlusions or blockages of the fluid line and is based on sophisticated measurement technology trusted by biomedical professionals around the world. The IDA-1S infusion device analyzer is easy to set up and requires little or no training to use. It can be used to analyze a wide variety of infusion pumps and the auto-start feature simplifies syringe pump testing and other tests that have long startup times.

The ProSim 2 and ProSim 3 vital signs simulators evaluate the performance of patient monitors, suitable for biomedical engineering and field service technicians that need a quality feature rich device with high portability (Portability meets performance).

Two-year extended warranty (no-cost extended warranty available after first-year calibration at any Fluke Biomedical authorized service center)

The ESA609 Electrical Safety Analyzer is a rugged, portable and easy-to-use analyzer designed for general electrical safety testing, and requires no prior training.

Quickly access menu options and test profiles, interpret results and see measurements at a distance up to 6’ (1.8 m) with the large, easy-to-read 7" (17.8 cm) color touch screen

An image of the ligand's 2D structure. For small molecules with SMILES these are drawn using the NCI/CADD Chemical Identifier Resolver. Click on the image to access the chemical structure search tool with the ligand pre-loaded in the structure editor. For other types of ligands, e.g. longer nucleotides and peptides, a manually drawn representation of the molecule may be provided.

Storage of Results: Test results stored for later viewing, printing or transfer to PC. Typical practical capacity: 250 tests

Power ratings115 Volt power outlet: 90 to 132 V ac rms, 47 to 63 Hz, 20 A maximum230 Volt power outlet: 180 to 264 V ac rms, 47 to 63 Hz, 16 A maximum

VT900A Gas Flow Analyzer / Ventilator Tester is designed to accurately and reliably test all types of gas flow equipment, especially those requiring high accuracy in ultra-low flow and ultra-low pressure measurements.

Interface languages: English, French, German, Italian, Spanish, Brazilian Portuguese, Simplified Chinese, Japanese, Russian, Polish

Communication: USB device upstream port: Mini-B connector for control by a computerUSB host controller port: Type A, 5 V output, 0.5 A max load. Connector for keyboard, barcode reader, and printerWireless: IEEE 82.15.4 for control by a computer

Temperature Requirements: 15°C to 30°C (59°F to 86°F); -20°C to +40°C (-4°F to +104°F) when drained of all liquid.Humidity: 10 % to 90 % non-condensing when operating; 5 % to 95 % non-condensing in storage.

Reduce testing time with built-in line sensors which automatically test humidity temperature and oxygen while compensating for atmospheric pressure and environmental conditions

8-in-1 multifunction patient simulator is a combination ECG simulator, fetal simulator, arrhythmia simulator, respiration simulator, temperature simulator, IBP simulator, cardiac output simulator, cardiac catheterization simulator, NIBP simulator and is the premier SpO2 simulator to test Rainbow multi-wavelength waveforms (with optional ProSim SpO2 Test Module)

ESA615 is an all-in-one solution with a safety analyzer and ECG simulator in a single electrical safety test device. Test to any standard in minutes with the ESA615.This multifaceted device performs all primary electrical safety tests, including line (mains) voltage, ground wire (protective earth) resistance, insulation resistance, device current, and patient lead leakage tests. It also offers ECG simulation and point-to-point voltage, leakage, and resistance tests.

Wireless communication for remote PC control of test device, as well as data transfer and automated regulatory reporting

Easily test and wirelessly* download all critical functions with precise power, current, frequency, crest factor and load resistance ranges while ensuring ESU safety, using the QA-ES III ESU analyzer. Quickly collect all measurements, including vessel sealing, contact quality monitor (CQM), high frequency (HF) leakage, and output power distribution (single or continuous mode) with the user-friendly interface guide. Ensure the performance and safety of electrosurgical units with simplified testing using the QA ES III electrosurgical analyzer. The QA-ES III is capable of testing all modern high power electrosurgical units with generator output current accuracy as low as ± 2.5 %.

Temperature Requirements: 10 ºC to 40 ºC (50 ºF to 104 ºF) when operating; -20° C to 60° C (-4 °F to 140 °F) in storage.Humidity: 10 % to 90 % non-condensing when operating; 5 % to 95 % non-condensing in storage

Test all day with 24 hour battery life which allows for long-term testing, and the INCU II can store up to 48 hours of test memory.

Reduce bulk and improve ease of transport with a convenient carrying case for the lightweight accessory and gas flow module

Compatible with patient monitors by original equipment manufacturers such as: * GE Healthcare, Philips Healthcare, Spacelabs Healthcare, Nihon Kohden, Welch Allyn, and Draeger (Dräger). * Brand and trade names remain the property of their respective owners. Usage does not imply an endorsement.

User interfaceLCD display: Monochrome 240 pixels x 64 pixels, 8 lines x 40 characters, white LED backlightKeys: 6 (1 fixed, 5 soft-defined) and rotary selector knob

IDA-1S is a portable, high-performance infusion device analyzer designed for fast and accurate verification of infusion pumps, on-the-go.

Built-to-order, the palm-sized device comes in four models to meet the varied needs of biomedical engineers and technicians:1H, 1G, 2H, and 2G. The DPM4-1G is the replacement for the popular, but now obsolete DPM3.

ProSim 4 vital signs simulator with breakthrough touchscreen technology offers quick and simple one-tap testing for patient monitor performance checks and troubleshooting. Designed to get you in and out of most locations in 60 seconds, this quick-check device offers 12-lead ECG simulation, respiration, IBP and NIBP testing in the palm of your hand. Featuring specialized stay-connected ECG posts to ensure secure lead connections and no-hassle testing, ProSim 4 is the perfect patient simulator for first-call patient monitor quality assurance and safety professionals.

Two-year extended warranty (no-cost, available after first-year calibration at any authorized Fluke Biomedical Service Center)

Lightweight, accurate and portable, the VT650 Gas Flow Analyzer offers high accuracy, reliability and portability for respiratory medical equipment testing, including neonatal, mechanical and high-frequency ventilators.

The IDA-5 Infusion Pump Analyzer is a multi-channel tester, providing fast, accurate, comprehensive and immediate results that helps increase your productivity. Built-in automation allows users to create custom test templates for quick, standardized testing of IV pump devices with minimal user intervention.

Portable, lightweight, ergonomic design with an integrated handle and tilt stand, designed for on-the-go field service professionals, operation in tight spaces, and can easily fit on any cart.

Rigorously tested for rugged field applications with CE and CSA in addition to Fluke-quality- ruggedness for long-term reliability

Storage of Results: Test results stored for later viewing, printing or transfer to PC. Typical practical capacity: 100 tests

Temperature Requirements: 10 °C to 40 °C (50 °F to +104 °F) when operating; -20 °C to +60 °C (-4 °F to +140 °F) when in storage.Humidity: 10 % to 90 % non-condensing

Temperature Requirements: 10 ºC to 40 ºC (50 ºF to 104 ºF) when operating; -20° C to 60° C (-4 °F to 140 °F) in storage.Humidity: 10 % to 90 % non-condensing when operating; 5 % to 95 % non-condensing in storage

Two-year extended warranty (no-cost, available after first-year calibration at any authorized Fluke Biomedical Service Center)