Kennedy® 526B Signature Series 26-3/4"W X… | WBB211555 - kennedy 26 8 drawer tool chest

 2024-09-22 14:29:52

Bathroom ExhaustMounting Location Refers to the location where a fan or ventilator can be mounted. CeilingMounting Position Refers to the orientation in which a product can be mounted. Horizontal

Pitched roof cap discharge accessory constructed of steel with black enamel finish. Includes integral flashing flash, built-in birdscreen and damper.

Direct DriveImpeller Type Style of impeller that is utilized on a product (i.e. Centrifugal or Axial). Centrifugal WheelImpeller Material Type of material the impeller of a fan or ventilator is constructed of. PolypropyleneHousing Material Type of material the housing of a ventilator is constructed of. Galvanized SteelIncludes Describes items that a particular product includes such as mounting hardware, etc. Backdraft damperMounting bracketsBackdraft damperMounting bracketsCertifications Certifications AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Backdraft damperMounting bracketsBackdraft damperMounting bracketsCertifications Certifications AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Exhaust General and Clean AirBathroom ExhaustExhaust General and Clean AirBathroom ExhaustMounting Location Refers to the location where a fan or ventilator can be mounted. CeilingMounting Position Refers to the orientation in which a product can be mounted. Horizontal

Speed controls are used for manual adjustment of the fan’s performance (for final system balancing) or to control the fan’s output in confined spaces, such as conference or meeting rooms. The fan can be adjusted to 60% of design airflow with a speed control. This reduction in airflow and fan speed is also accompanied by a reduction in noise level. Note: For use on direct drive fans with single phase, PSC or shaded pole motors.

AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Motion detectors use a passive infrared motion detector to automatically turn the fan on when a change in motion is sensed. They have a viewing area of 180 degrees, however they must be placed in the line-of-sight. May be used with SP and CSP fans or fan/light combinations.

Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. Rated for 115 to 230/277V, 4.3A.

sp-a250

Sick of loud, rattling bathroom fans? These low-CFM SP-A series bathroom exhaust fans offer the lowest sound levels in the industry. With under 0.3 sones, these fans are so quiet, you will barely know the bathroom fan is on.

greenheck sp-a190

Wall louvered discharge with anodized aluminum grille designed for exterior applications. Units feature built-in damper to eliminate backdrafts.

Brick vents provide a permanent means of ventilation for crawl spaces, hung ceilings, incinerator rooms, chimney flues, foundations, pipe spaces and corridors. Extruded construction provides a quality finished appearance. A high water stop at the rear and deep overlapping blades with storm stops provide maximum resistance to rain and weather.Anodized aluminum constructionBuilt in aluminum mesh insect screen

Washable aluminum mesh filters reduce the accumulation of airborne dirt on fan wheels and motors, extending the life of the fan. For use on models SP-A50-A390, B50-B200 with Designer Grille option.

sp-ap0511w-1

The SP Ceiling Radiation damper protects fire rated ceilings and effectively blocks the spread of heat and flames through the building's ventilation system. This damper is UL Classified; rated at three to four hours fire resistance.

AThermal Protection This is a feature which protects the motor from overheating and thus prolongs service life of the machine. In the event that the motor approaches overheating the thermal protection cuts power and only returns it after a cooling period. AutoOverloadNominal Efficiency Nominal Efficiency 20Watts Watts 16.7

The Certified Rating Programs of HVI were created to provide a fair and credible method of comparing ventilation performance of similar products. Our bathroom fans are tested to qualify for certification, plus the bathroom exhaust fans are subject to random verification testing to ensure that they continue to meet their certified performance ratings. All testing for certification and verification is performed by third-party laboratories independent of any manufacturer.

Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. Rated for 115 to 230/277V, 6.5A.

Model MS-16 is a 1 Pole, single throw wall mount manual starter with pilot light. This starter supports up to 1/2 HP, 120 Volt, 1 Phase and includes a face plate.

Shop MITCO 264-91M Spin-on Fuel Oil Filter at the best price on Ubuy India. Find a wide range of high-quality filters and get fast delivery to your ...

Backdraft damperMounting bracketsCertifications Certifications AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Switches may be used on model SP and CSP fans to enable manual control of your fan or fan and light combination. Two single pole combination switch assembly rated for 120V, 15A. UL Listed.

115Hertz Measure of the frequency or cycles per second. 60Motor Enclosure The housing or frame of the motor. n/aRPM The number of times per minute the shaft of the motor (machine) rotates. This is a function of design and the power supply. 900Motor Insulation The class of motor insulation for a given motor. The temperature capabilities of each insulation class is defined as being the maximum temperature at which the insulation can be operated to yield an average life of 2, hours (A = 15?C, B = 135?C, F = AThermal Protection This is a feature which protects the motor from overheating and thus prolongs service life of the machine. In the event that the motor approaches overheating the thermal protection cuts power and only returns it after a cooling period. AutoOverloadNominal Efficiency Nominal Efficiency 20Watts Watts 16.7

Sp a90manual

AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Model RFC-7 roof cap accessory includes weather-tight aluminum construction with an integral birdscreen and built-in flashing flange.

İnternet sitemizde, kullanıcı deneyiminizi kişiselleştirmek, iyileştirmek ve size uygun teklifleri sunabilmek için çerezler kullanıyoruz.

UL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

greenheck sp-a90-130-vg

Centrifugal WheelImpeller Material Type of material the impeller of a fan or ventilator is constructed of. PolypropyleneHousing Material Type of material the housing of a ventilator is constructed of. Galvanized SteelIncludes Describes items that a particular product includes such as mounting hardware, etc. Backdraft damperMounting bracketsBackdraft damperMounting bracketsCertifications Certifications AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Dehumidistats are available with models SP and CSP fans to ventilate humid spaces. The sensor automatically detects excess humidity and activates a ventilation fan for control of excess condensation. There are automatic, manual, or air cycle modes. This can replace a single pole switch for control of a ventilating fan.

60Motor Enclosure The housing or frame of the motor. n/aRPM The number of times per minute the shaft of the motor (machine) rotates. This is a function of design and the power supply. 900Motor Insulation The class of motor insulation for a given motor. The temperature capabilities of each insulation class is defined as being the maximum temperature at which the insulation can be operated to yield an average life of 2, hours (A = 15?C, B = 135?C, F = AThermal Protection This is a feature which protects the motor from overheating and thus prolongs service life of the machine. In the event that the motor approaches overheating the thermal protection cuts power and only returns it after a cooling period. AutoOverloadNominal Efficiency Nominal Efficiency 20Watts Watts 16.7

The plug-in integrated dehumidistat automatically detects excess humidity in a space and activates the fan for control of excess moisture. The sensitivity is adjustable from 50% RH to 80% RH and also includes a built in 15 minute time delay.

LRXR610840MD. 6" Round, 120-277V, 1000 lumen, 82 CRI, 4000K, 0-10V. 1-160. 5 days. 161-320. 2 weeks. 93034752. LRXR810840MD. 8" Round, 120-277V, 1000 lumen, 82 ...

It's simple, it's all in the paper. The HDC12 evaporative humidifier filter contains the highest quality of paper. As a result, it has greater absorbency, ...

Formula: C23H32OSi ; Molecular weight: 352.5851 ; CAS Registry Number: 111189-83-4 ; Information on this page: Gas phase ion energetics data; References; Notes.

Greenheck offers designer grilles with motion or combination motion and humidity sensors to provide your bath fan with an updated look and functionality. All optional sensors have time delay functionality as standard allowing for increased occupant comfort while minimizing energy costs.

Exhaust General and Clean AirBathroom ExhaustMounting Location Refers to the location where a fan or ventilator can be mounted. CeilingMounting Position Refers to the orientation in which a product can be mounted. Horizontal

Additional information. Covidien Nellcor OxiMax Durasensor with reusable cable - Adult. Nellcor™ reusable SpO₂ sensors with OxiMax™ technology feature a ...

Sollatek FreoCom FCA23 Series Control Pdf User Manuals. View online or download Sollatek FreoCom FCA23 Series Control User Manual.

UL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Switches may be used on model SP and CSP fans to enable manual control of your fan or fan and light combination. Single pole rocker switch assembly rated for 120-277V, 15A. UL Listed.

To earn the ENERGY STAR label, products must meet strict energyefficient standards set by the U.S. Environmental Protection Agency (EPA) for energy consumption, air and sound performance.

Mounting bracketsBackdraft damperMounting bracketsCertifications Certifications AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. Rated for 115 to 230/277V, 2.0A.

greenheck sp-b90

14 7/8 x 13 1/4 inOutlet Diameter This dimension describes the discharge diameter of a given product. 6 inHeight The height of a given product. 9 inDepth Maximum depth of a product. 13 1/4 inWeight Weight 12 lbs

The SP-A90-QD is an ENERGY STAR® certified bathroom exhaust fan designed to provide the lowest sound levels for bathroom exhaust. Featuring an insulated housing, this bathroom fan quietly ventilates your space using 70% less energy than a standard fan, saving on energy costs. The SP-A90-QD includes a spring loaded aluminum backdraft damper eliminating rattling along with external electrical access reducing installation time.

Buy from Scan - 1m Hosa BNC (Male) to BNC (Male) (BNC-59-103) from Digital Cables.

The Minimum Ventilation Control Switch monitors the operation of the fan to make sure that the space is receiving the correct amount of ventilation per ASHRAE 62.2.

1Phase Indicates the space relationships of windings and changing values of the recurring cycles of AC voltages and currents. The most common power supplies are either single- or three-phase. 1Voltage The force that causes a current to flow in an electrical circuit. The voltage of a motor is usually determined by the supply to which it is attached. NEMA requires that motor be able to carry its rated horsepower at nameplate voltage plus or minus 1% al 115Hertz Measure of the frequency or cycles per second. 60Motor Enclosure The housing or frame of the motor. n/aRPM The number of times per minute the shaft of the motor (machine) rotates. This is a function of design and the power supply. 900Motor Insulation The class of motor insulation for a given motor. The temperature capabilities of each insulation class is defined as being the maximum temperature at which the insulation can be operated to yield an average life of 2, hours (A = 15?C, B = 135?C, F = AThermal Protection This is a feature which protects the motor from overheating and thus prolongs service life of the machine. In the event that the motor approaches overheating the thermal protection cuts power and only returns it after a cooling period. AutoOverloadNominal Efficiency Nominal Efficiency 20Watts Watts 16.7

When the temperature in the space rises above the set point of 50 F - 90 F the contacts close and the thermostat will signal the fan to come on in order to exhaust air from the space. Includes face mounted thermometer that displays room temperature.

Hooded wall cap with round duct connection designed for outside wall applications. Constructed of aluminum, units feature built-in birdscreen and damper.

sp-a190

Model RCC-7 roof cap accessory includes weathertight aluminum construction with an integral birdscreen and built-in curb cap. Requires roof curb (sold separately).

Hooded wall cap with rectangular duct connection designed for outside wall applications. Constructed of steel with black enamel finish, units feature built-in birdscreen and damper.

900Motor Insulation The class of motor insulation for a given motor. The temperature capabilities of each insulation class is defined as being the maximum temperature at which the insulation can be operated to yield an average life of 2, hours (A = 15?C, B = 135?C, F = AThermal Protection This is a feature which protects the motor from overheating and thus prolongs service life of the machine. In the event that the motor approaches overheating the thermal protection cuts power and only returns it after a cooling period. AutoOverloadNominal Efficiency Nominal Efficiency 20Watts Watts 16.7

Bathroom ExhaustExhaust General and Clean AirBathroom ExhaustMounting Location Refers to the location where a fan or ventilator can be mounted. CeilingMounting Position Refers to the orientation in which a product can be mounted. Horizontal

NEMA-1 rated disconnect switch provides positive electrical shutoff and safety. Disconnect switches are a recommended and necessary safety feature for every fan. Mounted directly on the fan, within sight and reach, disconnect switches provide the best protection against accidental startup during service or inspection.

n/aRPM The number of times per minute the shaft of the motor (machine) rotates. This is a function of design and the power supply. 900Motor Insulation The class of motor insulation for a given motor. The temperature capabilities of each insulation class is defined as being the maximum temperature at which the insulation can be operated to yield an average life of 2, hours (A = 15?C, B = 135?C, F = AThermal Protection This is a feature which protects the motor from overheating and thus prolongs service life of the machine. In the event that the motor approaches overheating the thermal protection cuts power and only returns it after a cooling period. AutoOverloadNominal Efficiency Nominal Efficiency 20Watts Watts 16.7

Motion and humidity sensing grille options availableAcoustic insulation absorbs sound ensuring quiet operationENERGY STAR ratedExternal electrical access reduces installation timeIndustry leading low sound levelsSpeed controllableSpring loaded aluminum backdraft damper eliminates rattlingDesigner grille included

Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. Rated for 115 to 230/277V, 8.6A.

sp-a200

Buy Howard BBB012 Cutting Board Oil, 12 oz Bottle, Light Tan, Gel online at DKHardware.com. Our Hospitality & Display Shelving Systems category offers a ...

1Voltage The force that causes a current to flow in an electrical circuit. The voltage of a motor is usually determined by the supply to which it is attached. NEMA requires that motor be able to carry its rated horsepower at nameplate voltage plus or minus 1% al 115Hertz Measure of the frequency or cycles per second. 60Motor Enclosure The housing or frame of the motor. n/aRPM The number of times per minute the shaft of the motor (machine) rotates. This is a function of design and the power supply. 900Motor Insulation The class of motor insulation for a given motor. The temperature capabilities of each insulation class is defined as being the maximum temperature at which the insulation can be operated to yield an average life of 2, hours (A = 15?C, B = 135?C, F = AThermal Protection This is a feature which protects the motor from overheating and thus prolongs service life of the machine. In the event that the motor approaches overheating the thermal protection cuts power and only returns it after a cooling period. AutoOverloadNominal Efficiency Nominal Efficiency 20Watts Watts 16.7

PolypropyleneHousing Material Type of material the housing of a ventilator is constructed of. Galvanized SteelIncludes Describes items that a particular product includes such as mounting hardware, etc. Backdraft damperMounting bracketsBackdraft damperMounting bracketsCertifications Certifications AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

80-114FRPM Range FRPM Range 696-870Max. Operating Amps The maximum amperage that a given fan or ventilator will draw while in operation. 0.14

Mounting bracketsCertifications Certifications AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

Galvanized SteelIncludes Describes items that a particular product includes such as mounting hardware, etc. Backdraft damperMounting bracketsBackdraft damperMounting bracketsCertifications Certifications AMCA Air & SoundUL/cUL 507AMCA Air & SoundUL/cUL 507Speed Controllable Describes whether a fan or ventilator can be used with a solid state speed control. (NOTE: A speed control cannot be used with any belt-drive fan or ventilator.) Yes

ENERGY STAR® is a market-based partnership formed to reduce greenhouse gas emissions through energy efficiency and make it easier for consumers to identify energy-efficient products that offer savings, performance, features, and comfort.To earn the ENERGY STAR label, products must meet strict energyefficient standards set by the U.S. Environmental Protection Agency (EPA) for energy consumption, air and sound performance.

Time delay switches save energy by automatically turning off equipment. They may be used with SP and CSP fans or fan and light combinations for extended operating time of fan. Time delay switches act in the same manner as a standard switch, however, there is a delay of 10 to 60 minutes after the fan has been turned off.