Thermostatic switch, Clip-on thermostatic control for the UP/S 100 series circulators.Allows the pump to automatically turn on and off at a specific ...

Envíos gratis en el día ✓ Compra en cuotas sin interés y recibe tu ☞ Terro T517 Trampa Para Avispas Y Moscas, Repuesto 755624, Co.

Hyphenation of the English word hotline. Showing how to split the syllables of hotline.

uPI Group 2013 Vol.1 Integrated Power Adaptive Designs Flexible Solutions System Diagram Mobility Computer & Peri

Трубки для присоединения манжеты для измерения артериального давления НИАД взрослые для мониторов GE CRITIKON GE DINAMAP CARESCAPE DATEX OHMEDA.

MILL/ DIFFUSER Pada saat ini di Indonesia terdapat 61 pabrik gula (PG) dimana pada proses pemerahan nira dari tebu keban

Product Catalog 2014 The information in this document contains general descriptions of technical options available, whic

HVAC ASSESSMENT HANDBOOK A PRACTICAL GUIDE TO PERFORMANCE MEASUREMENTS IN MECHANICAL HEATING, VENTILATING, AND AIR CONDI

www.genstartech.com Table of Contents Air Gas Kits................................................................4 C

diffusers metric sizes retrofit duct mounted open areas woodgrains F Redefine your comfort zone. ™ | www.titus-hvac.com recessed lighting factories MRI compatible open ceiling energy solutions Redefine your comfort zone. ™ | www.titus-hvac.com Table of Contents F diffusers diffuser products Diffuser Products...................................................................................................................................................................................F6 overview Overview...............................................................................................................................................................................................F13 Application Icons Key...........................................................................................................................................................................F14 linear slot ceiling diffusers Modulinear - Aluminum.......................................................................................................................................................................F15 ML-37, -38, -39, -40, -TZ Slotted - Supply...........................................................................................................................................F15 MLR-37, -38, -39, -40, -TZ Slotted - Return.................................................................................................................................F15 Dimensions...................................................................................................................................................................................F16 Accessories..................................................................................................................................................................................F21 Installations..................................................................................................................................................................................F22 Linear Slot Performance Data......................................................................................................................................................F24 Return Performance Data for Plenum Applications.....................................................................................................................F28 Modulinear Narrow Tee - Aluminum...................................................................................................................................................F30 ML-37-NT, -38-NT, -39-NT, -40-NT Slotted - Supply...................................................................................................................F30 MLR-37-NT, -38-NT, -39-NT, -40-NT Slotted - Return.................................................................................................................F30 Modulinear Diffuser Plenums - Steel...................................................................................................................................................F31 MP-37, -38, -39, -40 Slotted - Supply.........................................................................................................................................F31 MP-SP-37, -38, -39, -40 Slotted - Supply.....................................................................................................................................F31 MPI-37, -38, -39, -40....................................................................................................................................................................F31 Dimensions...................................................................................................................................................................................F32 Installations..................................................................................................................................................................................F33 Modulinear Plenum Performance Data........................................................................................................................................F34 Modulinear - Lay-in..............................................................................................................................................................................F47 MLT-37, -38,-39, -40.............................................................................................................................................................................F47 Dimensions...................................................................................................................................................................................F48 linear bar diffusers DIFFUSERS Fixed Bars - Aluminum.........................................................................................................................................................................F49 CT-480, -481 - ¼” Spacing - 1/8” Bars - 0B/15B Deflection...........................................................................................................F49 CT-580, -581 - ½” Spacing - 1/8 ” Bars - 0B/15B Deflection...........................................................................................................F49 CT-540, -541 - ½” Spacing - ¼” Bars - 0B/15B Deflection............................................................................................................F49 Fixed Bars - Pencil Proof - Aluminum..................................................................................................................................................F49 CT-PP-0 - 7/16” Spacing - 7/32” Bars - 0B Deflection......................................................................................................................F49 CT-PP-3 - 7/16” Spacing - 7/32” Bars - 30B Deflection....................................................................................................................F49 Dimensions...................................................................................................................................................................................F50 Accessories..................................................................................................................................................................................F53 Installations..................................................................................................................................................................................F54 Linear Bar Performance Data.......................................................................................................................................................F55 Pencil Proof Linear Bar Performance Data...................................................................................................................................F58 F2 F2 linear louver diffusers Architectural - Adjustable - Aluminum................................................................................................................................................F60 LL-1, LL-2 .....................................................................................................................................................................................F60 Dimensions...................................................................................................................................................................................F61 Accessories..................................................................................................................................................................................F62 Installations..................................................................................................................................................................................F63 Performance Data.........................................................................................................................................................................F64 Table of Contents (continued) diffusers Two Horizontal Discharge Patterns......................................................................................................................................................F66 TMR, TMR-AA..............................................................................................................................................................................F66 Dimensions...................................................................................................................................................................................F67 Performance Data.........................................................................................................................................................................F68 Vertical to Horizontal Discharge Pattern - Adjustable.........................................................................................................................F69 TMRA, TMRA-AA.........................................................................................................................................................................F69 Dimensions...................................................................................................................................................................................F70 Performance Data.........................................................................................................................................................................F71 Adjustable Heavy Duty - Steel.............................................................................................................................................................F72 XC-310..........................................................................................................................................................................................F72 Dimensions...................................................................................................................................................................................F73 Performance Data.........................................................................................................................................................................F74 Adjustable Vortex - Steel......................................................................................................................................................................F75 V-1................................................................................................................................................................................................F75 Dimensions...................................................................................................................................................................................F76 Performance Data.........................................................................................................................................................................F77 perforated ceiling diffusers F DIFFUSERS 1, 2, 3, or 4-Way Discharge Pattern.....................................................................................................................................................F78 PAS, PAS-AA - Adjustable............................................................................................................................................................F78 PAR, PAR-AA................................................................................................................................................................................F78 PDS - Adjustable..........................................................................................................................................................................F78 PDR...............................................................................................................................................................................................F78 Dimensions...................................................................................................................................................................................F79 PAS Performance Data.................................................................................................................................................................F83 PDS Performance Data.................................................................................................................................................................F86 PAS, PDS Performance Notes......................................................................................................................................................F89 PAR, PXP, PMR, PXP-DR, PDR Performance Data........................................................................................................................F89 PAR, PXP, PMR, PXP-DR, PDR Performance Notes......................................................................................................................F89 Return Panels ..............................................................................................................................................................................F90 PXP, PXP-AA.................................................................................................................................................................................F90 PXP-DF..........................................................................................................................................................................................F90 Dimensions...................................................................................................................................................................................F91 Star Pattern - Adjustable......................................................................................................................................................................F92 PSS, PSS-AA.................................................................................................................................................................................F92 PSS-DF..........................................................................................................................................................................................F92 Dimensions...................................................................................................................................................................................F93 Discharge Patterns.......................................................................................................................................................................F95 Performance Data.........................................................................................................................................................................F96 Curved Blade - 1, 2, 3 or 4-Way Deflectors .................................................................................................................................F97 PCS, PCS-AA................................................................................................................................................................................F97 PCS-DF.........................................................................................................................................................................................F97 Dimensions...................................................................................................................................................................................F98 Installations................................................................................................................................................................................F100 Performance Data.......................................................................................................................................................................F101 Narrow Tee - Steel..............................................................................................................................................................................F103 PAS-NT - Round Pattern.............................................................................................................................................................F103 PAR-NT - Return.........................................................................................................................................................................F103 PXP-NT - Return Panel...............................................................................................................................................................F103 PSS-NT - Star Pattern.................................................................................................................................................................F103 PCS-NT - Curved Blade..............................................................................................................................................................F103 Dimensions.................................................................................................................................................................................F104 Modular Core - 1, 2, 3 or 4-Way Adjustable - Steel...........................................................................................................................F105 PMC............................................................................................................................................................................................F105 PMC-DF......................................................................................................................................................................................F105 PMR............................................................................................................................................................................................F105 Dimensions.................................................................................................................................................................................F106 Performance Data.......................................................................................................................................................................F107 Redefine your comfort zone. ™ | www.titus-hvac.com round ceiling diffusers F3 Redefine your comfort zone. ™ | www.titus-hvac.com Table of Contents (continued) DIFFUSERS F F4 F4 diffusers square ceiling diffusers High Performance .............................................................................................................................................................................F109 TMS, TMS-AA....................................................................................................................................................................................F109 Dimensions.................................................................................................................................................................................F110 Performance Data.......................................................................................................................................................................F112 High Performance - Horizontal to Vertical Discharge Pattern - Adjustable.......................................................................................F114 TMSA, TMSA-AA...............................................................................................................................................................................F114 Dimensions.................................................................................................................................................................................F115 Performance Data.......................................................................................................................................................................F116 Modular Core - 1, 2, 3 or 4-Way - Adjustable....................................................................................................................................F118 MCD, MCD-AA...........................................................................................................................................................................F118 Dimensions.................................................................................................................................................................................F119 Performance Data.......................................................................................................................................................................F121 architectural ceiling diffusers Square Plaque....................................................................................................................................................................................F123 OMNI, OMNI-AA........................................................................................................................................................................F123 Dimensions.................................................................................................................................................................................F124 Performance Data.......................................................................................................................................................................F127 Square Plaque, Narrow Tee................................................................................................................................................................F129 OMNI-NT, OMNI-AA-NT............................................................................................................................................................F129 Dimensions.................................................................................................................................................................................F130 Round Plaque - Steel.........................................................................................................................................................................F131 R-OMNI..............................................................................................................................................................................................F131 Dimensions.................................................................................................................................................................................F132 Performance Data.......................................................................................................................................................................F133 Performance Notes.....................................................................................................................................................................F134 Square Backpan, Round Plaque - Steel.............................................................................................................................................F135 OMNI-RS....................................................................................................................................................................................F135 Dimensions.................................................................................................................................................................................F136 Performance Data.......................................................................................................................................................................F137 Louvered Plaque - Steel.....................................................................................................................................................................F138 DAT.............................................................................................................................................................................................F138 Dimensions.................................................................................................................................................................................F139 Performance Data.......................................................................................................................................................................F140 Louvered Plaque, Narrow Tee - Steel.................................................................................................................................................F141 DAT-NT.......................................................................................................................................................................................F141 Dimensions.................................................................................................................................................................................F142 Modu-Bloc Series...............................................................................................................................................................................F143 MB-30.........................................................................................................................................................................................F143 MBR-30......................................................................................................................................................................................F143 Dimensions.................................................................................................................................................................................F144 MB-30 - ¾" Slot Width - Performance Data..............................................................................................................................F146 MB-30 - 1" Slot Width - Performance Data...............................................................................................................................F147 MBR-30 Performance Data........................................................................................................................................................F148 Modu-Bloc Series, Narrow Tee..........................................................................................................................................................F149 MB-30-NT...................................................................................................................................................................................F149 MBR-30-NT................................................................................................................................................................................F149 Dimensions.................................................................................................................................................................................F150 Swirl Face - Steel...............................................................................................................................................................................F151 TSW............................................................................................................................................................................................F151 Dimensions.................................................................................................................................................................................F152 Performance Data.......................................................................................................................................................................F153 Square Panel - Architectural Plaque Face..........................................................................................................................................F154 Spectrum....................................................................................................................................................................................F154 Dimensions.................................................................................................................................................................................F155 Performance Data.......................................................................................................................................................................F156 Table of Contents (continued) diffusers Louvered Face, High Capacity ...........................................................................................................................................................F158 TDC, TDC-AA..............................................................................................................................................................................F158 TDCA, TDCA-AA..........................................................................................................................................................................F158 Dimensions.................................................................................................................................................................................F159 Performance Data - Square Neck ..............................................................................................................................................F162 Performance Data - Rectangular Neck .....................................................................................................................................F163 Performance Data - Round Neck................................................................................................................................................F172 Performance Notes.....................................................................................................................................................................F174 Louvered Face, Narrow Tee - Steel....................................................................................................................................................F175 TDC-NT.......................................................................................................................................................................................F175 TDC-AA-NT.................................................................................................................................................................................F175 Dimensions.................................................................................................................................................................................F176 Louvered Face, Induction Vanes........................................................................................................................................................F177 TDV, TDV-AA...............................................................................................................................................................................F177 Dimensions.................................................................................................................................................................................F178 Performance Data - Square Neck...............................................................................................................................................F180 Performance Data - Round Neck................................................................................................................................................F182 Louvered Face, Induction Vanes, Narrow Tee....................................................................................................................................F184 TDV-NT, TDV-AA-NT...................................................................................................................................................................F184 Dimensions.................................................................................................................................................................................F185 Louvered Face, Induction Nozzles......................................................................................................................................................F186 TDX, TDX-AA..............................................................................................................................................................................F186 Dimensions.................................................................................................................................................................................F187 TDX ADPI Comparison................................................................................................................................................................F189 TDX , TDV & TDC Comparison ...................................................................................................................................................F190 Performance Data - Isothermal..................................................................................................................................................F191 Performance Data - 20DT Cooling.............................................................................................................................................F194 Louvered Face, Induction Nozzles, Narrow Tee.................................................................................................................................F197 TDX-NT, TDX-AA-NT...................................................................................................................................................................F197 Dimensions.................................................................................................................................................................................F198 Redefine your comfort zone. ™ | www.titus-hvac.com square and rectangular ceiling diffusers F adjustable one-, two-, three- or four-way discharge pattern Adjustable 1, 2, 3, 4-way Discharge Pattern......................................................................................................................................F199 250, 250-AA...............................................................................................................................................................................F199 Dimensions.................................................................................................................................................................................F200 Optional Discharge Patterns......................................................................................................................................................F201 Performance Data ......................................................................................................................................................................F202 turbofuser concentric supply / return diffusers Combination Supply/Return - High Capacity.....................................................................................................................................F212 CSR, CSR-P.................................................................................................................................................................................F212 Dimensions.................................................................................................................................................................................F213 Performance Data ......................................................................................................................................................................F215 DIFFUSERS Panel-Mounted Nozzles.....................................................................................................................................................................F205 TBF-AA........................................................................................................................................................................................F205 Dimensions.................................................................................................................................................................................F206 Performance Data ......................................................................................................................................................................F207 TND-AA......................................................................................................................................................................................F209 Dimensions.................................................................................................................................................................................F210 Performance Data ......................................................................................................................................................................F211 F5 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Diffuser Products ML / MLR CT LINEAR SLOT CEILING DIFFUSER LINEAR BAR DIFFUSER • Ideal for continuous DIFFUSERS F F6 F6 linear diffusers pages: F15-F65 • Designed for heating or cooling applications length applications • Full 180B pattern controller adjustment • Direction & volume of the discharged air can be adjusted gradually by moving the pattern controllers • Available in 8 different core MP MLT MODULINEAR DIFFUSER PLENUM • Designed specifically for field attachment of ML or MLR diffusers • Standard nominal lengths are 24, 36, 48, & 60 inches • Made from galvanized steel styles as well as a wide selection of frames & borders • Can be used in ceiling, side wall, sill or floor installations • MRI compatible MODULINEAR LAY-IN • Modular version of the ML diffuser with an MP plenum • Available in 2 and 4 foot module lengths • Insulated or non-insulated plenum options • Diffusers can be ordered without plenums LL ML-TZ / MLR-TZ LINEAR LOUVER DIFFUSER LINEAR SLOT CEILING DIFFUSER • Available in 1-way or 2-way • For use with Armstrong discharge patterns • Ideal for continuous length applications • Designed for heating or cooling applications • MRI compatible TechZone ceiling grids • Modular length applications • Full 180B pattern controller adjustment • Direction & volume discharged air can be adjusted gradually by moving the pattern controllers diffusers Diffuser Products (continued) TMR / TMR-AA TMRA / TMRA-AA TWO HORIZONTAL DISCHARGE PATTERNS VERTICAL TO HORIZONTAL DISCHARGE PATTERN ADJUSTABLE HEAVY DUTY DIFFUSER • Adjustable round ceiling be adjsusted from full horizontal to full vertical • Suitable for factories, warehouses, convention halls, & other applications where ceilings are high & conditions are variable • Uniform 360B discharge pattern • Provides excellent performance in variable air volume systems • All sizes have 3 cones diffusers for use in heating & cooling applications • All sizes have 4 cones • Uniform 360B discharge pattern XC-310 • Discharge pattern can V-1 ADJUSTABLE VORTEX Redefine your comfort zone. ™ | www.titus-hvac.com round ceiling diffusers pages: F66-F77 • Uniform 360B discharge pattern • Unit spins the air creating Coanda effect • Provides excellent performance in variable air volume systems F DIFFUSERS F7 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Diffuser Products (continued) F PCS / PCS-AA / PCS-DF DIFFUSERS PAS PSS / PSS-DF / PSS-AA PMC / PMR CURVED BLADE DEFLECTORS ADJUSTABLE PATTERN CONTROLLERS ADJUSTABLE STAR PATTERN ADJUSTABLE MODULAR CORE • 51% free area perforated face • Can be adjusted before • 51% free area perforated face • Provides tight, uniform, • 51% free area perforated face • Generates high induction air • 51% free area perforated face • Adjustable to 1,2,3, or or after installation • Discharge pattern can be adjusted from horizontal to vertical • Provides excellent performance in variable air volume systems PAR / PAR-AA F8 F8 perforated ceiling diffusers pages: F78-F108 horizontal blanket of air that protects the ceiling against smudging • Can be adjusted before or after installation • Provides excellent performance in variable air volume systems PXP / PXP-AA / PXP-DF RETURN DIFFUSERS RETURN PANELS • 51% free area perforated face • Provides a matching • 51% free area perforated face • Designed for return or appearance to supply diffusers exhaust applications • Comprised of heavy gauge steel & aluminum pattern that maximizes throw • Can be changed to either side blow or corner blow in the field 4-way discharge pattern after installation • Modular core sections are easily removable • Provides excellent performance in variable air volume systems diffusers Diffuser Products (continued) TMS / TMS-A / TMSA / TMSA-AA MCD / MCD-AA HIGH PERFORMANCE ADJUSTABLE MODULAR CORE • • • • • • • • • • Uniform 360B discharge pattern Designed to protect ceiling from streaking & smudging Available in steel or aluminum Provides excellent performance in variable air volume systems Available in fixed or adjustable pattern Adjustable to 1, 2, 3, or 4-way discharge pattern after installation Modular core sections are easily removable Available in steel or aluminum Provides excellent performance in variable air volume systems Maintains horizontal flow pattern from maximum to minimum cfm Redefine your comfort zone. ™ | www.titus-hvac.com square ceiling diffusers pages: F109-F122 F DIFFUSERS F9 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Diffuser Products (continued) F R-OMNI OMNI-RS SQUARE PLAQUE DIFFUSER STEEL ROUND PLAQUE DIFFUSER STEEL ROUND PLAQUE DIFFUSER LOUVERED PLAQUE • Uniform 360B horizontal • Uniform 360B discharge pattern • Designed for architectural • Delivers a tight 360B diffuser to harmonize with ceiling system • Designed for architectural ceilings • Provides excellent performance in variable air volume systems • Easy connection to flexible duct OMNI / OMNI-AA air pattern • Designed for architectural ceilings • Available in steel or aluminum • Provides excellent performance in variable air volume systems DIFFUSERS MB / MBR F10 F10 architectural ceiling diffusers pages: F123-F157 ceilings & exposed ductwork • For use in heating or cooling applications • Provides excellent performance in variable air volume systems TSW MODU-BLOC SERIES SWIRL FACE • Choice of 1, 2, 3, or 4-slots • Flow pattern guards • Delivers a tight 360B against ceiling smudging • Discharge patterns are individually adjustable for each slot • Easy connection to flexible duct horizontal air pattern • Designed for architectural ceilings • Provides excellent performance in variable air volume systems circular air pattern • Designed for architectural ceilings • Provides excellent performance in variable air volume systems SPECTRUM CURVED PANEL PLAQUE FACE • Center appliqué available in nine standard colors • Provides a tight 4-way horizontal air discharge pattern • Can be used for retrofit applications with perforated diffusers DAT • Smooth plaque face allows diffusers Diffuser Products (continued) TDC / TDC-AA / TDCA / TDC-AA TDX / TDX-AA TDV / TDV-AA LOUVERED FACE, HIGH CAPACITY LOUVERED FACE, INDUCTION VANES LOUVERED FACE, INDUCTION NOZZLES • Handles large amount of air for a • High capacity ceiling diffusers • Available in 1, 2 ,3 , or 4-way core sizes • Maintains an unbroken horizontal • High induction ceiling diffusers • Available in 1, 2 ,3 , or 4-way core sizes • Maintains an unbroken horizontal flow pattern from maximum cfm down to minimum • Excellent performance for variable air volume systems • Integrated induction vanes for mixing air • Available in steel or aluminum flow pattern from maximum cfm down to minimum • Excellent performance for variable air volume systems • Integrated induction nozzles for mixing air • Available in steel or aluminum • • • • given pressure drop and noise level Maintains an unbroken horizontal flow pattern from maximum cfm down to minimum Excellent performance for variable air volume systems Available in fixed or adjustable pattern Available in steel or aluminum TBF-AA TND-AA PANEL-MOUNTED NOZZLES NOZZLE DIFFUSER • Designed for ceiling & • Provides precise control • Provides precise control of high capacity jets • Versatile diffuser for demanding spot cooling & heating HVAC applications • Available in variety of nozzle sizes • Available in steel or aluminum of high capacity jets • Versatile diffuser for demanding spot cooling & heating HVAC applications • Available in variety of nozzle sizes DIFFUSERS ADJUSTABLE DISCHARGE PATTERN sidewall installations • Louvers are individually adjustable from the face of the diffuser • Excellent performance for variable air volume systems • Available in steel or aluminum F adjustable ceiling & nozzle diffusers pages: F199-F211 250 / 250-AA Redefine your comfort zone. ™ | www.titus-hvac.com square & rectangular ceiling diffusers pages: F158-F198 F11 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Diffuser Products (continued) pages: F212-F215 CSR / CSR-P COMBINATION SUPPLY / RETURN • Supply & return air are handled through one air device • Compatible with unitary package units • High capacity with long throws DIFFUSERS F F12 F12 combination supply / return ceiling diffuser diffusers Overview Redefine your comfort zone. ™ | www.titus-hvac.com LINEAR DIFFUSERS Linear diffusers are long, narrow outlets that can be installed in multiple sections to achieve the appearance of one continuous length. Linear diffusers are also available to fit in modular ceiling systems. This family of diffusers has superior architectural appearance and is excellent for applications such as long corridors, large public areas, perimeter zones of offices and large exterior glass areas found in entrances and atriums. • • • • • FlowBar Linear Diffusers (Model FL) Linear Slot Ceiling Diffusers (Model ML) Linear Bar Diffusers (Model CT) Linear Louver Diffusers (Model LL) Armstrong Techzone Ceiling Diffusers (Model ML-TZ) ROUND CEILING DIFFUSERS Titus round ceiling diffusers are available in a broad range of sizes. These devices are typically installed in sheet rock or exposed duct. Titus round diffusers are available with adjustable deflectors that allow the option for either horizontal or vertical flow. With their high capacity design, round ceiling diffusers are an excellent selection for gymnasiums, atriums, industrial facilities, and large retail stores. • • • • • F 2 Horizontal Pattern (Model TMR) Horizontal to Vertical Pattern (Model TMRA) Heavy Duty Adjustable (Model XC-310) Vortex Diffuser (Model V-1) Architectural Round (R-OMNI) PERFORATED CEILING DIFFUSERS Perforated ceiling diffusers are typically selected to meet architectural demands for air outlets that blend into the ceiling plane. Features include perforated face with 51% free area, round or square inlets, and multiple mounting options. Titus perforated diffusers can be selected with round or cross flow discharge patterns to maximize capacity or throw. • • • • • • Adjustable curved blade deflectors (Model PCS) Stamped pattern controllers (Model PAS) Star pattern (Model PSS) Modular core (Model PMC) Matching return with backpan (Model PAR) Matching return, perforated face only (Model PXP) SQUARE CEILING DIFFUSERS • High performance (Model TMS) • High performance, adjustable pattern (Model TMSA) • Modular Core, (Model MCD) ARCHITECTURAL CEILING DIFFUSERS Titus architectural diffusers are high performance products designed to provide a pleasing architectural appearance. These diffusers provide a tight horizontal ceiling pattern maximizing room air induction and • • • • • • Square Plaque Diffuser (Model OMNI) Round Plaque Diffuser (Model R-OMNI) Square Backpan, Round Plaque Diffuser (Model OMNI-RS) Louvered with Plaque Face Diffuser (Model DAT) Modu-Bloc Diffuser, Adjustable (Model MB) Curved Plaque Face Diffuser (Model Spectrum) SQUARE & RECTANGULAR CEILING DIFFUSERS LOUVERED FACE Titus square and rectangular ceiling diffusers feature an aesthetically pleasing, louvered face design. These diffusers are available in 1-, 2-, 3- or 4-way airflow discharge patterns which provides a high level of flexibility in any design application. The units also offer an architecturally pleasing appearance with the diffuser face flush with the ceiling surface. All models are available in steel or aluminum construction and multiple mounting options. • Louvered Face, Square, Rectangular, or Round Neck Inlet (Model TDC) • Louvered Face, Square, Rectangular, or Round Neck inlet, Induction Vanes (TDV) • Louvered Face, Square, Rectangular, or Round Neck inlet, Induction Nozzles (TDX) DIFFUSERS Titus square diffusers are designed to maximize engineering performance. This family of products includes the TMS fixed pattern diffuser, TMSA adjustable pattern diffuser, and the MCD modular core diffuser. All models are available in steel or aluminum construction and multiple mounting options. Titus square ceiling diffusers are an excellent choice for VAV (variable air volume) applications. comfort in the occupied space. They are an excellent choice for architects, engineers and design professionals who want to maximize performance and aesthetics in an air outlet. F13 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Overview (continued) F SQUARE AND RECTANGULAR CEILING AND SIDE WALL DIFFUSERS Square and rectangular ceiling and side wall diffusers can be applied to areas requiring directional patterns. The adjustable curved blades on the face of the 250 diffuser allow adjustment of the discharge airflow pattern from vertical to horizontal thereby providing maximum for ceiling or sidewall applications The Titus TBF-AA TurboFuser features concentric round cones that provide superb aesthetics and is great for applications requiring spot cooling or heating control. utilizes the 50F eggcrate core to maximize the return air performance. The CSR-P model features the same face design but includes a distribution plenum. Titus combination supply/return diffusers are compatible with unitary equipment from 2-½ to 25 tons. CEILING DIFFUSERS FOR SPECIAL CEILING GRID DESIGNS Narrow Tee, boltslot, TechZone, and regressed tile ceilings are just a few examples of the special ceiling grid types being offered today. Titus has a complete line of diffusers that are designed to integrate with these different ceilings types and maintain superior aesthetics and performance. • Curved blades, adjustable discharge pattern (Model 250) • Spot Heating and Cooling (Model TBF-AA TurboFuser) • Spot Heating and Cooling (Model TND-AA Nozzle Diffuser) COMBINATION SUPPLY / RETURN CEILING DIFFUSER Titus combination supply/return diffusers are designed for use with unitary roof top package systems. The CSR model features a combination supply/return diffuser face and no distribution plenum. The supply section of the face is constructed with louver blades to provide maximum performance with a flush face design. The return section in the center APPLICATION ICONS KEY for use in retrofitting older products into modern designs & systems retrofit great for areas where the conditioned space is large and the ductwork is unable to be brought closer to the occupants open areas additional finish options available for HVAC products that resemble realistic woodgrains, and adds high-end detail quality to any application woodgrains for use in MRI environments & will not significantly affect the diagnostic information MRI compatible for use in factories, warehouses, shopping malls and other large open spaces where long throws are required factories contributes toward energy savings by reducing operating costs of air distribution devices energy solutions DIFFUSERS suitable for foyers, waiting rooms and other areas with recessed lighting fixtures recessed lighting duct mounted can be used in open ceiling environments open ceiling F14 F14 mounts directly to ductwork Diffuser module sizes are hard metric & inlets are soft. Metric linear and grille products are converted to the nearest ¼” for ordering. Contact us for more information. metric sizes diffusers Linear Slot Ceiling Diffusers Redefine your comfort zone. ™ | www.titus-hvac.com ML / MLR / ML-TZ • Titus modulinear diffusers are designed for variable air volume systems. They project a uniform blanket of air that adheres to the ceiling even at low flow rates. • Both the direction and volume of the discharge air can be adjusted gradually by moving the pattern controllers (see diagrams below) • Full 180° pattern controller adjustment means there are no “lefts” or “rights.” Specifying, ordering, and installing are simplified. • Model MLR returns are the same as the Model ML supply diffusers except that the pattern controllers are omitted. • Choice of borders and mounting frames for various types of installations • Available with one to eight slots ML • Ideal for continuous length applications. Multiple sections are shipped with required alignment strips or pins for field installation. metric sizes Return Models: MLR-37 / ½” Slot MLR-38 / ¾” Slot MLR-39 / 1” Slot MLR-40 / 1½” Slot MLR-TZ / ¾” Slot open ceiling See website for Specifications AVAILABLE MODELS: Supply Models: ML-37 / ½” Slot ML-38 / ¾” Slot ML-39 / 1” Slot ML-40 / 1½” Slot ML-TZ / ¾” Slot duct mounted Horizontal One Way FINISHES Standard Finish - #26 White border. Black pattern controllers Optional Finish - Anodized finishes available Modulinear / Aluminum The Titus ML Modulinear diffuser is a high performance, high quality linear slot diffuser. The unique “ice tong” deflector blades allow both changes in air volume and direction from the face of the diffuser. This diffuser is also available in 1 through 8-slot configurations with the exception of the ML-40, which is available in 1 through 4-slot configurations. Opposed Angular Down Vertical Vertical & Horizontal Fully Dampered Opposed Unequal Flow (One Slot Dampered) ADDITIONAL FEATURES • Maximum one piece section is 6 feet. Lengths greater than 6 feet are furnished in multiple sections • Optional Model MLF and MLRF diffusers are designed for field cutting to length and are furnished in 6-foot sections • Maximum pattern controller length is 3 feet. Pattern controllers are furnished in multiple sections for a diffuser longer than 3 feet. • Mounting frames are cut to length and assembled in the field • Material is extruded aluminum with steel pattern controllers • Optional curving to a 6-foot minimum radius available for architectural enhancement (fixed blades only) ML / MLR / ML-TZ OVERVIEW Dampered Horizontal F F15 diffusers ML / MLR UNIT DIMENSIONS Border Types 1A, 1B both with • Flange Border • (1A) Screw Mounting • (1B) Duct Mounting/ lay-in application, No Screw Holes 1¾" 1¾" ¾" S 1⅛" O' = D' plus ⅞" ¾" ⅛" O' = D' plus ⅞" Border Type 1B ⅛" to ½" A O’ 2A 11/8 D’ + ¾ /8 D’ + ¼ Frame & Border Type 3 with • Flush Border • Concealed Mounting D' plus 1¼" D' plus ½" D'=Duct Size 35/16" 115/16" ¾" O' = D' minus ⅛" ¾" S O' = D' plus ¾" Frame & Border Types 7A, 7B with • Plaster & Tile Mounting Frame • Flange Border • Concealed Mounting 1⅛" 35/16" ½" ⅛" ¾" S O' = D' minus ⅛" Border Types 9A, 9B with • Flange Border • Ceiling Hangers Hanger D'=Duct Size D' plus 1¼" D' plus ½" D'=Duct Size DIMENSIONS A Frame & Border Type 6 with • Plaster & Tile Mounting Frame • Flush Border • Concealed Mounting D'=Duct Size S ⅛" S O' 1⅞" ¾" 1¾" ¾" Frame & Border Type 4 with • Flange Border • Concealed Mounting D'=Duct Size 1⅛" 35/16" Type 7 ⅛" S D' = Duct Size Border Types 2A, 2B both with • Flange Border • Concealed Mounting 35/16" 3⅛" 1" Border Type 11 with • Perimeter Plaster & • Tile Mounting Frame • Flush Border • Concealed Mounting D'=Duct Size ¾" O' S A 1⅞" ¾" ⅛" S O' A 11/8 7 /8 O’ D’ + ¾ D’ + ¼ 35/16" 1¾" 11/16" 9/16" ¾" 1⅞" ¾" 35/16" 115/16" Type 7A 7B F16 F16 D' = Duct Size Border Type 1A 2B F Countersunk Screwholes for #8 SMS (5/16" from edge) D' = Duct Size FRAME AND BORDER TYPES Note: See page F18 for duct dimensions FRAME AND BORDER TYPES Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS Type 9A 9B A ¾ 11/8 A 1/16" O’ D’ + 5/8 D’ + 13/8 All dimensions are in inches ½" ¾" S ¾" O' = D' minus ⅛" 1" diffusers DIMENSIONS Border Type 12 with Border Type 15 with • Spline Border • Flush Border • Ceiling Hangers • Ceiling Hangers D'=Duct Size Hanger D'=Duct Size 3⅛" 3⅛" 1¾" 13/16" 7/16" ¾" O' = D' minus 1¾" 11/16" ¾" S 7/16" 1/16" S O' = D' minus 1/16" Border Type 16 with Hanger Border Type 22 with • Curved Flange Border • Tape & Spackle Border • Concealed Mounting • H9 Hard Ceiling Clip 7/16" Redefine your comfort zone. ™ | www.titus-hvac.com ML / MLR UNIT DIMENSIONS F • Equalizing Grid ½x½x½ Aluminum Equalizing Grid Duct by Others 1⅛" ¾" All dimensions are in inches DIMENSIONS Standard selections: ML-38 only 1 slot: duct diameters 10, 12, 14, 16, 18, 20, 22, 24” 2 slot: duct diameters 12, 14, 16, 18, 20, 22, 24” 3 slot: duct diameters 14, 16, 18, 20, 22, 24, 26” 4 slot: duct diameters 18, 20, 22, 24, 26, 28, 30, 32” F17 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS F END FABRICATION X End Border (Border 22 only) X End Border Y Open Border D = Duct Size Z End Cap D = Duct Size C C D = Duct Size O O D =CDuct Size C O O OVERALL LENGTH FOR VARIOUS END FABRICATIONS Frame and/or Border Type X X Y X-X X Z X-Y 1A, 1B, 9B 2A, 4, 7A 3, 6, 11 C D - 13/8 D - 13/8 D - 13/8 O D+¾ D+¾ D 2B, 7B 9A 12, 15 D - 13/8 D - 13/8 D - 11/16 D+¼ D D 16 22 X D - 13/8 D+¾ D - 13/16 D + 11/16 C Y Y X-Z Y Y-Y Z Z Z Y-Z Z-Z D - /16 D - 11/16 D - 11/16 O D + 3/8 D + 3/8 D C D - 5/8 D - 5/8 D - 5/8 O D + 7/16 D + 7/16 D + 1/16 C D D D O D D D C D + 1/16 D + 1/16 D + 1/16 O D + 1/16 D + 1/16 D + 1/16 C D + 1/8 D + 1/8 D + 1/8 O D + 1/8 D + 1/8 D + 1/8 D - 11/16 D - 11/16 D - 5/16 D + 1/8 D D D - 5/8 D - 5/8 D-¼ D + 3/16 D + 1/16 D + 1/16 D D D D D D D + 1/16 D + 1/16 D + 1/16 D + 1/16 D + 1/16 D + 1/16 D + 1/8 D + 1/8 D + 1/8 D + 1/8 D + 1/8 D + 1/8 D - 11/16 D - 19/32 D + 3/8 D + 17/32 N/A N/A N/A N/A D D D D N/A N/A N/A N/A N/A N/A N/A N/A 11 DUCT DIMENSION D’ (WIDTH) FOR VARIOUS FRAME & BORDER TYPES DIMENSIONS Types 1A, 1B F18 F18 No. of Slots 1 2 3 4 5 6 7 8 Types 2A, 2B, 4, 7A, 7B, 16 Types 3, 6, 11 Types 9A, 9B, 12, 15, 22 ML/MLR 37 ML/MLR 38 ML/MLR 39 ML/MLR 40 ML/MLR 37 ML/MLR 38 ML/MLR 39 ML/MLR 40 ML/MLR 37 ML/MLR 38 ML/MLR 39 ML/MLR 40 ML/MLR 37 ML/MLR 38 ML/MLR 39 ML/MLR 40 S=½ 17/8 31/8 43/8 55/8 67/8 81/8 93/8 105/8 S=¾ 21/8 35/8 51/8 65/8 81/8 95/8 111/8 125/8 S=1 23/8 41/8 57/8 75/8 93/8 111/8 127/8 145/8 S = 1 1/2 27/8 51/8 73/8 95/8 N/A N/A N/A N/A S=½ 2 3¼ 4½ 5¾ 7 8¼ 9½ 10¾ S=¾ 2¼ 3¾ 5¼ 6¾ 8¼ 9¾ 11¼ 12¾ S=1 2½ 4¼ 6 7¾ 9½ 11¼ 13 14¾ S = 1 1/2 3 5¼ 7½ 9¾ N/A N/A N/A N/A S=½ 2⅛ 33/8 45/8 57/8 71/8 83/8 95/8 107/8 S=¾ 23/8 37/8 53/8 67/8 83/8 97/8 113/8 127/8 All dimensions are in inches S=1 25/8 43/8 61/8 77/8 95/8 113/8 131/8 147/8 S = 1 1/2 31/8 53/8 75/8 97/8 N/A N/A N/A N/A S=½ 13/8 25/8 37/8 51/8 63/8 75/8 87/8 101/8 S=¾ 15/8 31/8 45/8 61/8 75/8 91/8 105/8 121/8 S=1 17/8 35/8 53/8 71/8 87/8 105/8 123/8 141/8 S = 1 1/2 23/8 45/8 67/8 91/8 N/A N/A N/A N/A ML / MLR-37 Not Available in Type 22 diffusers DIMENSIONS Redefine your comfort zone. ™ | www.titus-hvac.com BORDER TYPES - ML-TZ, MLR-TZ BORDER LT (LAY-IN T-BAR) 1 3/8" 2 11/16" 1 7/8" 1 7/8" 3/4" 3/4" 9/16" 5 3/4" 5 3/4" 4" 5 5/16" 1 7/8" 9/16" 9/16" 3/4" 3/4" 5 3/4" 5 3/4" BORDER NT (NARROW TEE) 2 11/16" 1 3/8" 1 9/16" 1 9/16" 5/16" 3/4" 5/16" 9/16" 3/4" 5 3/8" 3/16" 5 3/8" 5 3/4" 3/16" 5 3/4" 4" 5 5/16" 1 9/16" 1 9/16" 5/16" 9/16" 3/4" 5 3/8" 5 3/4" F 5/16" 9/16" 3/4" 3/16" 5 3/8" 3/16" 5 3/4" DIMENSIONS F19 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS F LT Border NT Border D = Duct Size C C D = Duct Size O O OVERALL LENGTH FOR LT AND NT BORDERS Nominal Length (inches) DIMENSIONS 24 30 36 48 60 72 F20 F20 Border LT NT Border C O C O 22 /8 285/8 345/8 465/8 585/8 705/8 23 /16 2913/16 3513/16 4713/16 5913/16 7113/16 23 /8 293/8 353/8 473/8 593/8 713/8 233/8 293/8 353/8 473/8 593/8 713/8 5 13 3 diffusers ACCESSORIES MLF - Supply MLRF - Return Available Supply Models: MLF-37 / ½” Slot MLF-38 / ¾” Slot MLF-39 / 1” Slot MLF-40 / 1½” Slot Available Return Models: MLRF-37 / ½” Slot MLRF-38 / ¾” Slot MLRF-39 / 1” Slot MLRF-40 / 1½” Slot Cut Cut • Ideal when the exact length of an ML or MLR diffuser is not known until it is being installed • Standard factory cut diffusers can be trimmed up to 6 inches. If more than 6 inches are to be removed, use the optional field cut diffuser. • The field cut ML or MLR diffuser is 72 inches long, with the sides prepunched to assure the proper alignment of field installed spacers. These field installed spacers provide additional rigidity during and after cutting. Redefine your comfort zone. ™ | www.titus-hvac.com FIELD CUT DIFFUSERS MITERED CORNERS Available Models: MC-37 / ½” Slot MC-38 / ¾” Slot MC-39 / 1” Slot MC-40 / 1½” Slot D = Duct Size No. of Slots O F DIMENSIONS FOR 90° MIITERED CORNERS 1A, 1B O D 2A, 4, 7A O D 2B, 7B O D 3, 6, 11 O D O 9A D O 9B D 12, 15 O D 22 O D 1, 2 127/16 12 123/8 12 121/8 12 117/8 12 125/16 12 1211/16 12 12 12 133/16 12 3–8 247/16 24 243/8 24 241/8 24 237/8 24 245/16 24 2411/16 24 24 24 253/16 24 Note: Dimensions shown will vary for other angles D = Duct Size O PLENUMS W Available Insulated Models: MPI-37 / ½” Slot MPI-38 / ¾” Slot MPI-39 / 1” Slot MPI-40 / 1½” Slot MPI-37-SP / ½” Slot MPI-38-SP / ¾” Slot MPI-39-SP / 1” Slot MPI-40-SP / 1½” Slot L A H ½" Note: End caps are not insulated. B Optional Internal Insulation (MPI Models) Optional (MP-SP Design) BLANK-OFFS BLKS / Cold Rolled Steel / Fits over Neck / Black Finish BLKV / Vinyl / Fits in Slot / Black Finish All dimensions are in inches Furnished in 6-foot lengths. Field installed. ACCESSORIES Available Uninsulated Models: MP-37 / ½” Slot MP-38 / ¾” Slot MP-39 / 1” Slot MP-40 / 1½” Slot MP-37-SP / ½” Slot MP-38-SP / ¾” Slot MP-39-SP / 1” Slot MP-40-SP / 1½” Slot 1⅛" F21 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com INSTALLATIONS MOUNTING FRAME ASSEMBLY Field Assembled Corners Note: Mounting frame is used only on Frame & Border Types 3, 4, 6, 7A, 7B, 11. Shipped with mill finish. Side Rail Field Assembled Corners Alignment Strips • Temporary Gauge Mounting frame for Titus Modulinear diffusers • assures a clean, accurately dimensioned ceiling opening to receive the diffuser Temporary Gauge • • easily, without disfiguring the ceiling • Choice of designs for wet plaster and other types of ceilings End Frame (Factory Welded) Diffusers can be removed and replaced Furnished with the diffusers in Frame & Border Types 3, 4, 6, 7A, 7B and 11 • Cut to length in the field Allows the diffusers to be unpacked and installed after construction is finished F Mitered Corner Spring Clip Factory Blade Spacer Support (Welded) Bar Optional End Border Alignment Pins Optional End Cap #8 x 1¼ Oval Head Screw (Border Type 1A only) Optional Blank-Offs • • Pattern Controller Diffusers can be joined together end- accurately welded and carefully finished for a smooth, unbroken the ends of the diffusers and simplify corner treatment. Mitered corners installations ending at walls and are rendered inactive with factory- other stopping points (see page F17) installed blank-offs. (see page F20) • Alignment pins maintain close joints between sections (Border 22) Align Y-Y ends using supplied SS1 Spline Support Clips INSTALLATIONS Factory-made mitered corners are End borders and end caps close off #6 x ½ SMS • Do not screw support clips into side of diffuser. The screws may interfere with adjustment of the diffuser blades. • Always allow for expansion and contraction per the Grilles and Diffusers Engineering Guidelines section of the Catalog F22 F22 • to-end to form long, continuous slots diffusers INSTALLATIONS Field Cut Diffuser • Titus Modulinear diffusers are so simple and rugged they are routinely cut to length in the field with a fine tooth, high-speed carbon steel metal cutting blade • Factory-cut diffuser Model ML (above) or MLR is ordered for a specified length from the factory, but can be trimmed as much as 3 inches from each end in the field Hanger Bracket for Border Types 9A, 9B, 12, 15 Redefine your comfort zone. ™ | www.titus-hvac.com Factory Cut Diffuser (Trimming) • Field-cut diffuser Model MLF (above) or MLRF is shipped in standard 6-foot lengths • Model MLF or MLRF diffuser can be cut to any length. Field-installed spacers and other hardware are furnished with the diffuser for one field cut. Additional field cut kits are available at additional cost. • Unit is shipped without end caps or end borders Hanger Bracket for Border Types 2A, 2B F Hanger Bracket for Frame & Border Types 3, 4, 6, 7A, 7B, 11 Duct By Others These hanger brackets are a convenient means of attaching hanger wires to support the diffuser from the structural members of the building. Here the diffuser is simply pushed up into the duct until the outer legs of the hanger brackets snap into the hems of the duct. Screws then snug the diffuser against the ceiling. For installation in a Titus mounting frame, these hanger brackets function like the duct type brackets at the left. The outer legs of the brackets engage the side rails of the mounting frame. INSTALLATIONS Ceiling F23 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ML-37 / ½" SLOT SPACING WIDTH / SUPPLY WITH CONTINUOUS PLENUM 1-Slot 2-Slot 3-Slot 4-Slot F 5-Slot 6-Slot 7-Slot 8-Slot Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical 5 0.006 1-1-6 2 10 0.006 1-3-10 4 16 0.006 2-4-13 5 21 0.006 3-6-14 7 26 0.006 3-7-16 7 31 0.006 4-9-18 7 36 0.006 6-10-19 8 42 0.006 7-10-20 8 10 0.023 3-6-12 6 21 0.023 13 5-10-17 8 31 0.023 15 7-13-21 10 42 0.023 16 10-14-25 12 52 0.023 17 11-16-28 14 62 0.023 18 12-18-30 16 73 0.023 19 13-19-33 16 83 0.023 19 14-20-35 17 PERFORMANCE DATA F24 F24 2 -3 0 4 0 +3 6 +2 +5 8 +3 +6 21 0.090 27 10-12-17 11 42 0.090 30 14-17-25 16 62 0.090 32 17-21-30 19 83 0.090 33 19-25-35 22 104 0.090 34 22-28-39 25 125 0.090 35 24-30-43 27 146 0.090 35 25-33-46 29 166 0.090 36 27-35-49 31 26 0.141 32 11-14-19 12 52 0.141 35 16-19-28 17 78 0.141 37 19-24-34 21 104 0.141 38 22-28-39 25 130 0.141 39 25-31-44 28 156 0.141 40 28-34-48 30 182 0.141 41 30-36-52 32 208 0.141 41 32-39-55 35 31 0.203 37 12-15-21 14 62 0.203 40 17-21-30 19 94 0.203 41 21-26-37 23 125 0.203 43 25-30-43 27 156 0.203 44 28-34-48 30 187 0.203 44 30-37-52 33 218 0.203 45 33-40-56 35 250 0.203 46 35-43-60 38 36 0.277 40 13-16-23 15 73 0.277 43 19-23-33 20 109 0.277 45 23-28-40 25 146 0.277 46 27-33-46 29 182 0.277 47 30-36-52 32 218 0.277 48 33-40-56 35 255 0.277 49 35-43-61 38 291 0.277 49 38-46-65 41 42 0.362 44 14-17-25 16 83 0.362 47 20-25-35 22 125 0.362 48 25-30-43 27 166 0.362 50 28-35-49 31 208 0.362 51 32-39-55 35 250 0.362 51 35-43-60 38 291 0.362 52 38-46-65 41 333 0.362 53 40-49-70 43 47 0.458 46 15-18-26 17 94 0.458 49 21-26-37 24 140 0.458 51 26-32-45 28 187 0.458 52 30-37-52 33 234 0.458 53 34-41-58 37 281 0.458 54 37-45-64 40 328 0.458 55 40-49-69 43 374 0.458 55 43-52-74 45 Throw correction multiplier for length NC corrections for various diffuser lengths Length Supply Return 16 0.051 20 6-11-15 9 31 0.051 23 10-15-21 13 47 0.051 25 13-18-26 15 62 0.051 26 14-21-30 18 78 0.051 27 16-24-34 20 94 0.051 28 18-26-37 22 109 0.051 29 19-28-40 24 125 0.051 29 20-30-43 26 10 +5 +8 Length Throw Correction Performance notes appear at end of performance data 2 0.72 4 1.0 8 1.5 10 1.7 diffusers PERFORMANCE DATA 1-Slot 2-Slot 3-Slot 4-Slot 5-Slot 6-Slot 7-Slot 8-Slot Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical 6 0.004 1-2-6 2 12 0.004 1-3-11 4 19 0.004 2-5-14 6 25 0.004 3-6-16 6 31 0.004 4-8-18 7 37 0.004 5-10-19 8 43 0.004 6-10-21 8 50 0.004 7-11-22 8 12 0.016 3-6-16 6 25 0.016 5-11-22 9 37 0.016 8-14-27 11 50 0.016 11-16-32 13 62 0.016 12-18-35 14 74 0.016 12 13-19-39 15 87 0.016 12 14-21-42 16 99 0.016 13 15-22-45 16 NC corrections for various diffuser lengths 2 -3 0 4 0 +3 6 +2 +5 8 +3 +6 25 0.065 20 11-16-23 12 50 0.065 23 15-22-33 17 74 0.065 25 18-27-40 21 99 0.065 26 21-32-46 24 124 0.065 27 24-35-52 27 149 0.065 28 26-39-57 30 174 0.065 29 28-42-61 32 198 0.065 29 30-45-66 33 31 0.102 26 13-18-26 14 62 0.102 29 19-26-37 19 93 0.102 31 23-32-45 23 124 0.102 32 26-37-52 27 155 0.102 33 29-41-58 30 186 0.102 34 32-45-64 33 217 0.102 34 35-49-69 36 248 0.102 35 37-52-73 38 37 0.146 30 16-20-28 15 74 0.146 33 22-28-40 21 112 0.146 35 27-35-49 26 149 0.146 36 32-40-57 30 186 0.146 37 35-45-64 33 223 0.146 38 39-49-70 36 260 0.146 39 42-53-75 39 298 0.146 39 45-57-81 42 43 0.199 34 18-22-31 16 87 0.199 37 25-31-43 23 130 0.199 39 31-38-53 28 174 0.199 40 36-43-61 32 217 0.199 41 40-49-69 36 260 0.199 42 43-53-75 39 304 0.199 42 47-58-81 42 347 0.199 43 50-61-87 45 50 0.260 37 19-23-33 17 99 0.260 40 27-33-46 24 149 0.260 42 33-40-57 30 198 0.260 43 38-46-66 34 248 0.260 44 42-52-73 38 298 0.260 45 46-57-81 42 347 0.260 45 50-61-87 45 397 0.260 46 54-66-93 48 56 0.330 40 20-25-35 18 112 0.330 43 28-35-49 25 167 0.330 45 35-43-60 32 223 0.330 46 40-49-70 36 279 0.330 47 45-55-78 40 335 0.330 48 49-60-85 45 391 0.330 48 53-65-92 48 446 0.330 49 57-70-99 51 F Throw correction multiplier for length 10 +5 +8 Length Throw Correction Performance notes appear at end of performance data 2 0.72 4 1.0 8 1.5 10 1.7 PERFORMANCE DATA Length Supply Return 19 0.037 14 6-12-20 10 37 0.037 17 11-17-28 14 56 0.037 18 14-20-35 17 74 0.037 20 16-24-40 19 93 0.037 21 18-26-45 21 112 0.037 21 19-29-49 24 130 0.037 22 21-31-53 24 149 0.037 23 22-33-57 24 Redefine your comfort zone. ™ | www.titus-hvac.com ML-38, -TZ / ¾" SLOT SPACING WIDTH / SUPPLY WITH CONTINUOUS PLENUM F25 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ML-39 / 1" SLOT SPACING WIDTH / SUPPLY WITH CONTINUOUS PLENUM 1-Slot 2-Slot 3-Slot 4-Slot F 5-Slot 6-Slot 7-Slot 8-Slot Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. Static Pressure NC (Noise Criteria) Horizontal Vertical 7 0.004 1-2-6 2 13 0.004 1-3-12 5 20 0.004 2-5-14 7 26 0.004 3-6-16 8 33 0.004 4-8-18 9 40 0.004 5-10-20 9 46 0.004 6-11-22 10 53 0.004 8-12-23 11 13 0.014 3-6-16 8 26 0.014 5-12-23 11 40 0.014 8-14-28 13 53 0.014 11-16-33 15 66 0.014 12-18-36 17 79 0.014 12 13-20-40 19 92 0.014 12 14-22-43 20 106 0.014 13 15-23-46 22 20 0.032 13 6-12-21 12 40 0.032 16 12-17-29 16 59 0.032 18 14-21-36 20 79 0.032 19 16-24-42 23 99 0.032 20 18-27-46 25 119 0.032 21 20-30-51 28 139 0.032 22 22-32-55 30 158 0.032 23 23-35-59 32 PERFORMANCE DATA NC corrections for various diffuser lengths F26 F26 Length Supply Return 2 -3 0 4 0 +3 6 +2 +5 8 +3 +6 26 0.057 20 11-16-24 14 53 0.057 23 15-23-34 19 79 0.057 25 19-28-42 24 106 0.057 26 22-33-48 28 132 0.057 27 24-36-54 31 158 0.057 28 27-40-59 34 185 0.057 29 29-43-63 36 211 0.057 29 31-46-68 39 10 +5 +8 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the engineering section of this catalog for additional information. • Horizontal throw values given are for terminal velocities of 150, 100 and 50 fpm • Throw values given are for isothermal conditions, and are based on 4-foot active section. For other lengths, see the Throw Correction Table. • Pressure is given in inches of WG for ML only • Vertical throw values are given for terminal velocities of 50 fpm • For divided throw, use the cfm-per-foot value for the number of slots in each direction. For sound, use the NC values for cfm-perfoot for the total number of slots. 33 0.089 26 14-19-27 15 66 0.089 29 19-27-38 22 99 0.089 30 23-33-46 27 132 0.089 32 27-38-54 31 165 0.089 33 30-42-60 34 198 0.089 33 33-46-66 38 231 0.089 34 36-50-71 41 264 0.089 35 38-54-76 43 40 0.128 30 16-21-29 17 79 0.128 33 23-29-42 24 119 0.128 35 28-36-51 29 158 0.128 36 33-42-59 34 198 0.128 37 36-46-66 38 238 0.128 38 40-51-72 41 277 0.128 38 43-55-78 45 317 0.128 39 46-59-83 48 46 0.174 34 18-22-32 18 92 0.174 37 26-32-45 26 139 0.174 39 32-39-55 32 185 0.174 40 37-45-63 36 231 0.174 41 41-50-71 41 277 0.174 42 45-55-78 45 323 0.174 42 48-59-84 48 370 0.174 43 52-63-90 52 53 0.228 37 20-24-34 19 106 0.228 40 28-34-48 28 158 0.228 42 34-42-59 34 211 0.228 43 39-48-68 39 264 0.228 44 44-54-76 43 317 0.228 45 48-59-83 48 370 0.228 45 52-63-90 52 422 0.228 46 55-68-96 55 59 0.288 40 21-25-36 20 119 0.288 43 29-36-51 30 178 0.288 45 36-44-62 36 238 0.288 46 42-51-72 42 297 0.288 47 46-57-80 45 356 0.288 48 51-62-88 51 416 0.288 48 55-67-95 55 475 0.288 49 59-72-102 58 Throw correction multiplier for length Length Throw Correction 2 0.72 4 1.0 8 1.5 10 1.7 • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts • For vertical throw, deduct 11 NC • Dash (-) in space denotes an NC value of less than 10 • NC is based on 4-foot lengths; for other lengths use the NC correction table • Throws listed are for the 1-way pattern. For divided airflow, select the airflow in each direction according to the number of slots aimed in that direction, with the total airflow apportioned between slots. For an explanation of catalog throw data, see the Engineering Guidelines section of the catalog. • Data obtained using plenums with duct velocities less than 800 fpm. See pages F34-F45 for data with Titus plenums. • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet diffusers PERFORMANCE DATA Number of Slots 1-Slot 2-Slot 3-Slot 4-Slot Total Pressure 0.004 0.015 0.034 0.060 0.093 0.134 0.183 0.239 Airflow, cfm/ft. NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. NC (Noise Criteria) Horizontal Vertical Airflow, cfm/ft. NC (Noise Criteria) Horizontal Vertical 8 1-2-7 4 16 1-3-10 5 24 1-3-13 7 32 2-4-15 8 16 3-7-15 7 32 5-10-21 10 46 6-13-25 12 64 12 7-15-29 14 24 16 7-11-18 11 48 18 10-16-25 15 72 20 13-19-31 19 96 22 15-22-36 21 32 23 10-15-21 14 64 26 14-21-29 20 96 28 17-25-36 25 128 30 20-29-42 28 40 29 12-18-23 18 80 31 17-23-33 25 120 34 21-28-40 31 160 35 24-33-46 35 48 33 15-18-25 21 96 36 21-25-36 30 144 38 25-31-44 37 192 40 29-36-51 43 56 37 16-19-27 25 112 40 22-27-39 35 168 43 27-34-48 43 224 44 32-39-54 49 64 41 17-21-29 29 128 44 24-29-42 39 192 45 29-38-51 50 256 47 34-42-59 59 Redefine your comfort zone. ™ | www.titus-hvac.com ML-40 / 1½" SLOT SPACING WIDTH / SUPPLY WITH CONTINUOUS PLENUM Throw correction table for lengths ML-40 length (ft) Correction factor 2 0.40 4 0.83 6 1.00 8 1.15 10 1.29 6 0 8 +2 10 +3 F NC correction table for lengths ML-40 length (ft) Correction factor 2 -6 4 -2 • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts • For vertical throw, deduct 11 NC • Dash (-) in space denotes an NC value of less than 10 • NC is based on 6-foot lengths. For other lengths use the NC correction table above. • Data was obtained using plenums with duct velocities less than 800 fpm. See pages F34-F45 for data with Titus plenums. • For continuous lengths, a one foot blankoff should be used in between every 6 foot active section. A two foot blankoff should be used in between 10 foot active sections. Active sections should not exceed 10 feet without a blankoff. • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet PERFORMANCE DATA • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. Refer to the engineering section of the catalog for additional information. • Throw values given are for isothermal conditions, and are based on 6-foot active section. For other lengths, see the Throw Correction Table. • Horizontal throw values given are for terminal velocities of 150, 100 and 50 fpm • Vertical throw values given are for terminal velocity of 50 fpm • Throws listed are for the 1-way pattern • For divided throw, use the cfm-per-foot value for the number of slots in each direction. For sound, use the NC values for cfm-perfoot for the total number of slots. • Pressure is given in inches of water gauge (WG) F27 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA RETURN PERFORMANCE DATA FOR PLENUM MLR-37 APPLICATIONS No. of Slots • All pressures are in inches of water • NC values are based on a room absorption of 10 dB, re 10-12 watts, with a 10-foot active diffuser section (see the table below) • Dash (—) in space denotes NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006 • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet 1 2 3 4 5 6 7 8 F NC Correction for Various MLR Lengths Length (ft.) 2 4 10 15 20 MLR -7 -4 0 +2 +3 Negative SP 0.011 0.025 0.045 0.072 0.103 0.180 0.275 0.415 cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC 10 — 20 — 30 — 40 — 50 — 60 — 70 — 80 — 15 — 30 — 45 11 60 12 75 13 90 14 105 15 120 15 20 14 40 17 60 19 80 20 100 21 120 22 140 23 160 23 25 20 50 23 75 25 100 26 125 27 150 28 175 29 200 29 30 25 60 28 90 30 120 31 150 32 180 33 210 34 240 34 40 33 80 36 120 38 160 39 200 40 240 41 280 42 320 42 50 39 100 42 150 44 200 45 250 46 300 47 350 48 400 48 60 44 120 47 180 49 240 50 300 51 360 52 420 53 480 53 Negative SP 0.007 0.028 0.063 0.108 0.170 0.250 0.345 0.450 cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC 10 — 20 — 30 — 40 — 50 — 60 — 70 — 80 — 20 — 40 10 60 12 80 13 100 14 120 15 140 16 160 16 30 18 60 21 90 23 120 24 150 25 180 26 210 27 240 27 40 26 80 29 120 31 160 32 200 33 240 34 280 35 320 35 50 32 100 35 150 37 200 38 250 39 300 40 350 41 400 41 60 37 120 40 180 42 240 43 300 44 360 45 420 46 480 46 70 41 140 44 210 46 280 47 350 48 420 49 490 50 560 50 80 45 160 48 240 50 320 51 400 52 480 53 560 54 640 54 Negative SP 0.018 0.040 0.070 0.108 0.160 0.215 0.280 0.450 cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC cfm per ft. NC 20 — 40 — 60 — 80 — 100 — 120 — 140 — 160 — 30 11 60 14 90 16 120 17 150 18 180 19 210 20 240 20 40 19 80 22 120 24 160 25 200 26 240 27 280 28 320 28 50 25 100 28 150 30 200 31 250 32 300 33 350 34 400 34 60 30 120 33 180 35 240 36 300 37 360 38 420 39 480 39 70 34 140 37 210 39 280 40 350 41 420 42 490 43 560 43 80 38 160 41 240 43 320 44 400 45 480 46 560 47 640 47 100 44 200 47 300 49 400 50 500 51 600 52 700 53 800 53 MLR-38, -TZ No. of Slots 1 2 3 4 5 6 7 8 PERFORMANCE DATA MLR-39 No. of Slots 1 2 3 4 5 6 7 F28 F28 8 diffusers PERFORMANCE DATA Number of Slots 1-Slot 2-Slot 3-Slot 4-Slot Negative Static Pressure 0.007 0.028 0.063 0.108 0.17 0.250 0.345 0.450 Airflow, cfm/ft. NC (Noise Criteria) Airflow, cfm/ft. NC (Noise Criteria) Airflow, cfm/ft. NC (Noise Criteria) Airflow, cfm/ft. NC (Noise Criteria) 20 40 60 80 - 40 10 80 13 120 15 160 16 60 21 120 24 180 20 240 27 80 29 160 32 240 34 320 35 100 35 200 38 300 40 400 41 120 40 240 43 360 45 480 46 140 44 280 47 420 49 560 50 160 48 320 51 480 53 640 54 NC correction table for lengths ML-40 length (ft) Correction factor 2 -6 4 -2 6 0 8 +2 10 +3 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Pressure is given in inches of water gauge (WG) • NC values are based on a room absorption of 10 dB, re 10-12 watts, with a 10-foot active diffuser section. For other lengths, refer to the NC correction table above. • Dash (-) in space denotes an NC value of less than 10 • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet Redefine your comfort zone. ™ | www.titus-hvac.com MLR-40 F PERFORMANCE DATA F29 Redefine your comfort zone. ™ | www.titus-hvac.com Linear Slot Ceiling Diffusers (continued) diffusers ML-NT / MLR-NT • The ML Modulinear diffuser is a high performance, high quality linear slot diffuser. The unique “ice tong” deflector blades allow both changes in air volume and direction from the face of the diffuser. • Available in one to eight slots • Available in 24" or 48" lengths • Made of extruded aluminum with steel deflectors ML-NT / MLR-NT F AVAILABLE MODELS: Supply Models: ML-37-NT / ½” Slot ML-38-NT / ¾” Slot ML-39-NT / 1” Slot ML-40-NT / 1½” Slot Return Models: MLR-37-NT / ½” Slot MLR-38-NT / ¾” Slot MLR-39-NT / 1” Slot MLR-40-NT / 1½” Slot FINISH Standard Finish - #26 White ML-NT / MLR-NT OVERVIEW F30 F30 Modulinear Narrow Tee / Aluminum ML-NT diffusers are compatible with 24" x 24" modules for regressed narrow tee ceiling systems. The Titus ML Modulinear is a high performance, high quality linear slot diffuser. The unique “ice tong” deflector blades allow both changes in air volume and direction from the face of the diffuser. For Performance Data and Notes, please refer to pages F24-F27 for models (ML-37-NT, ML-38-NT, ML-39-NT; ML-40-NT) and pages F28-F29 for models (MLR-37-NT, MLR-38-NT, MLR-39-NT, and MLR-40-NT). See website for Specifications diffusers Linear Slot Ceiling Diffusers (continued) Redefine your comfort zone. ™ | www.titus-hvac.com MP / MPI • Titus Series MP plenums are designed specifically for field attachment of ML or MLR Modulinear diffusers • Utilizes the Modulinear diffuser’s excellent variable air volume performance. The air stays on the ceiling in a tight, horizontal pattern, even at low volumes. • Widths available to fit all Models ML and MLR Modulinear diffusers • Standard nominal lengths are 24, 36, 48, and 60 inches • End caps can be turned up to allow plenums to be installed on continuous runs of ML diffusers • Optional internal insulation (MPI and MPI-SP models) • Optional field mounted inlet dampers are available • Material is galvanized steel AVAILABLE MODELS: Models: MP-37 / ½” Slot MP-38 / ¾” Slot MP-39 / 1” Slot MP-40 / 1½” Slot Special Performance Models: MP-37-SP / ½” Slot MP-38-SP / ¾” Slot MP-39-SP / 1” Slot MP-40-SP / 1½” Slot MP / MPI See website for Specifications F ADDITIONAL FEATURES • Optional MP-SP models maximize air diffusion by shortening the throw and widening the spread of the discharge air. This is accomplished by internal baffling. The result is improved shortthrow applications. • With the air directed against an outside wall, the ML diffuser mounted in an MP-SP allows effective handling of the thermal load by thoroughly blanketing the wall or window surface MPI-37 / ½” Slot MPI-38 / ¾” Slot MPI-39 / 1” Slot MPI-40 / 1½” Slot OVERVIEW Modulinear Diffuser Plenums / Steel See pages F34-F46 for further explanation of the MP-SP performance MP / MPI The Titus MP is an optional plenum for use with the ML modulinear series. When combined with the ML diffuser the MP provides a tight horizontal air pattern that clings to the ceiling even at low volumes. F31 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS MP / MPI UNIT DIMENSIONS 1⅛" W A ½" H Border Types: 3, 4, 6, 7A, 7B, & 11 H LP HP (in.) 75/8 105/8 L ML/MLR End Fabrication XX XY YY ZZ Optional Internal Insulation (MPI Models) B Note: End caps are not insulated. MODEL MP OR MP-SP PLENUM FOR ML AND MLR DIFFUSERS Border Types 1A, 1B, 3, 4, 6, 7A, 7B, 11, 9A, 9B, 12, 15, 22 F All Border Types Nominal Length N (inches) 24 36 48 60 72 Note: Units with 12 inch inlets are 105/8 inches high Border Types: 1A, 1B, 9A, 9B, 12 & 15 End Fabrication ML/MLR End Fabrication XX XY YY ZZ Standard Inlets Standard Inlet Size 6, 8, 10 6, 8, 10 6, 8, 10, 12 6, 8, 10, 12 6, 8, 10, 12 6 Oval 8 Oval 10 Oval 12 Oval ML/MLR Type DIMENSIONS F32 F32 Standard Inlet Size 6 Oval 8 Oval 10 Oval 12 Oval A B 6¼ 93/8 12½ 141/8 5¼ 5¼ 5¼ 77/8 2 3 A B 5¼ 5¼ 5¼ 77/8 27/16 211/16 33/16 2 3 /16 3 /16 4 /16 57/16 3 4 /16 5 /16 6 /16 711/16 4 5 /16 6 /16 7 /16 915/16 5 7 /16 8 /16 9 /16 N/A 6 87/16 915/16 117/16 N/A 7 911/16 117/16 133/16 N/A 8 1015/16 1215/16 1415/16 N/A 7 11 15 3 15 7 7 3 15 15 7 11 8 6 /16 7 /16 8 /16 103/16 63/16 711/16 93/16 1011/16 123/16 57/16 73/16 815/16 1011/16 127/16 4 /16 6 /16 9 /16 2 /16 3 /16 5 /16 N - 7/8 N - 7/8 N-¼ N-¼ MP-38 111/16 33/16 411/16 MP-39 115/16 311/16 MP-40 2 /16 11 15 11 15 3 3 7 11 N/A 15 N/A L A N/A 143/16 N/A W 1 18" 1 B 2" H 6, 8, 10 6, 8, 10 6, 8, 10, 12 6, 8, 10, 12 6, 8, 10, 12 6¼ 93/8 12½ 141/8 23/16 7 1 /16 7 1 6 MP-37 7 Standard Inlets Dimensions Width Number of Slots 4 5 L MODEL MP OR MP-SP PLENUM FOR ML AND MLR DIFFUSERS Border Types 2A, 2B Nominal Length N (inches) 24 36 48 60 72 1 Dimensions N-¼ N-¼ N-¼ N-¼ Width Number of Slots MP-37 MP-38 MP-39 MP-40 ML/MLR Type Optional (MP-SP Design) L H (in.) OPTIONAL INTERNAL INSULATION (MPI MODELS) ML/MLR End Fabrication L XX XY YY ZZ N - 7/8 N - 7/8 N-¼ N-¼ ML/MLR Type LP HP 8 11 Width (W) Number of Slots 4 5 1 2 3 6 7 8 MP-37 23/16 37/16 411/16 515/16 73/16 87/16 911/16 1015/16 MP-38 27/16 315/16 57/16 615/16 87/16 915/16 117/16 1215/16 MP-39 211/16 47/16 63/16 715/16 911/16 117/16 133/16 1415/16 MP-40 33/16 57/16 711/16 915/16 N/A All dimensions are in inches N/A N/A N/A diffusers INSTALLATIONS Border Types (MP-TZ) 1A, 1B, 9A, 9B, 12, 15 W = PLENUM SIZE Border Types 2A, 2B SCREWS BY OTHERS Redefine your comfort zone. ™ | www.titus-hvac.com INSTALLATION DETAILS / TRIMMING, CUTTING, HANGING Frame & Border Types 3, 4, 6, 7A, 7B, 11 W=Plenum Size W = PLENUM SIZE Concealed Mounting SCREWS BY OTHERS MP-SP PERFORMANCE Elevation, MP-SP Plan View Diffuser F Plenum Mounted on Diffuser Jet Throw MP-SP MPI-SP Airflow Spread for Maximum Diffusion MP-SP models maximize air diffusion by shortening the throw and widening the spread of the discharge air. This is accomplished by internal baffling. The result is improved comfort in short-throw applications, as in exterior zones. MP Spread At a given cfm, the MP-SP plenum shortens the throw and widens the spread of the air leaving the diffuser (as compared with the MP plenum or standard plenum). INSTALLATIONS F33 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ML-37 / ½" SLOT SPACING WIDTH / ONE-SLOT / SUPPLY WITH MP-37 PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. F 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 20 0.017 0.017 3-6-12 30 0.017 0.016 2-5-11 25 0.028 0.027 4-8-15 35 0.015 0.014 3-6-13 25 0.039 0.039 4-8-15 40 0.017 0.016 4-7-13 45 0.025 0.025 5-8-14 33 0.046 0.044 21 7-10-20 48 0.043 0.039 19 5-9-15 38 0.063 0.062 20 8-12-22 55 0.037 0.035 19 7-10-16 35 0.077 0.076 16 7-11-21 65 0.044 0.043 20 8-12-17 70 0.060 0.059 18 8-13-18 45 0.087 0.084 29 9-14-24 65 0.081 0.074 27 8-12-17 50 0.111 0.110 27 10-15-25 75 0.068 0.065 26 9-13-18 45 0.127 0.126 22 9-14-24 90 0.085 0.082 28 11-14-20 95 0.111 0.109 25 11-15-21 58 0.143 0.137 34 12-18-27 83 0.131 0.119 32 10-14-19 63 0.174 0.172 32 13-19-28 95 0.110 0.104 32 11-15-21 55 0.190 0.189 27 11-17-26 115 0.138 0.134 34 13-16-23 120 0.176 0.174 30 13-16-23 70 0.212 0.203 39 14-21-30 100 0.193 0.175 37 12-15-21 75 0.251 0.247 37 15-22-31 115 0.161 0.152 36 13-16-23 65 0.265 0.264 31 13-20-29 140 0.205 0.198 38 14-18-25 145 0.257 0.255 35 15-18-26 83 0.294 0.282 43 17-23-32 118 0.266 0.241 41 13-16-23 88 0.341 0.336 40 18-23-33 135 0.222 0.209 40 14-17-25 75 0.353 0.351 34 15-22-31 165 0.285 0.275 42 16-19-27 170 0.354 0.350 39 16-20-28 95 0.390 0.374 46 20-24-34 135 0.351 0.319 44 14-17-25 100 0.446 0.439 43 20-25-35 155 0.292 0.276 43 15-19-26 85 0.453 0.451 37 17-23-33 190 0.378 0.365 45 17-21-29 195 0.466 0.461 42 17-21-30 80 0.233 0.222 37 13-20-32 120 0.163 0.137 36 12-16-23 65 0.247 0.244 28 11-16-29 150 0.200 0.185 38 15-18-26 50 0.320 0.319 19 8-13-25 150 0.215 0.207 35 15-18-26 130 0.316 0.313 27 13-17-24 95 0.328 0.312 41 16-24-34 140 0.222 0.187 40 14-18-25 75 0.329 0.325 32 13-19-31 178 0.280 0.259 42 16-20-28 55 0.387 0.386 22 9-14-26 178 0.301 0.289 39 16-20-28 148 0.406 0.403 30 15-18-26 110 0.440 0.419 45 18-26-37 160 0.290 0.244 43 15-19-27 85 0.422 0.417 35 14-21-33 205 0.374 0.345 45 18-21-30 60 0.460 0.459 24 10-15-27 205 0.401 0.386 42 18-21-30 165 0.509 0.505 33 16-19-27 ML-38, -TZ / ¾" SLOT SPACING WIDTH / ONE-SLOT / SUPPLY WITH MP-38 PLENUM 2 ft. 6" Inlet 4 ft. PERFORMANCE DATA 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet F34 F34 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 20 0.015 0.014 1-3-10 40 0.018 0.015 2-5-12 25 0.037 0.036 2-5-13 40 0.014 0.013 2-5-12 30 0.115 0.115 3-7-15 40 0.015 0.015 2-5-12 60 0.067 0.067 5-9-16 35 0.045 0.042 18 4-9-18 60 0.041 0.034 20 5-9-16 35 0.072 0.071 14 4-9-18 68 0.041 0.037 19 6-10-17 35 0.157 0.156 11 4-9-18 68 0.044 0.042 16 6-10-17 78 0.112 0.111 15 8-11-19 50 0.091 0.087 26 8-13-25 80 0.072 0.061 27 8-12-19 45 0.118 0.117 20 7-11-23 95 0.080 0.074 27 9-14-21 40 0.205 0.204 14 6-10-20 95 0.086 0.083 24 9-14-21 95 0.169 0.167 20 9-14-21 65 0.154 0.146 32 11-16-29 100 0.113 0.095 32 10-15-21 55 0.177 0.175 24 9-14-26 123 0.134 0.123 33 12-17-23 45 0.259 0.258 17 7-11-23 123 0.143 0.138 30 12-17-23 113 0.236 0.235 24 11-16-23 Performance notes appear at end of performance data diffusers PERFORMANCE DATA 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 20 0.008 0.007 1-2-8 35 0.010 0.008 1-2-9 30 0.021 0.020 2-5-13 40 0.009 0.008 1-3-10 30 0.031 0.031 2-5-13 50 0.012 0.012 2-5-13 60 0.023 0.023 3-7-15 35 0.025 0.023 18 3-6-15 55 0.026 0.020 18 2-6-14 45 0.046 0.045 20 5-10-20 65 0.024 0.021 18 3-8-17 45 0.071 0.070 17 5-10-20 78 0.030 0.028 20 5-10-19 90 0.052 0.051 19 7-12-20 50 0.051 0.046 27 6-11-22 75 0.048 0.037 26 5-10-18 60 0.082 0.080 27 8-13-26 90 0.045 0.039 26 7-12-20 60 0.126 0.124 24 8-13-26 105 0.055 0.051 27 9-13-22 120 0.093 0.091 26 10-15-23 65 0.086 0.078 33 9-14-28 95 0.076 0.060 31 7-12-21 75 0.128 0.124 32 11-16-31 115 0.074 0.064 32 10-15-23 75 0.197 0.194 29 11-16-31 133 0.088 0.081 32 11-17-24 150 0.145 0.142 31 13-18-26 80 0.130 0.118 38 12-17-32 115 0.112 0.088 36 10-15-23 90 0.185 0.179 36 13-20-34 140 0.109 0.096 36 12-18-25 90 0.283 0.280 34 13-20-34 160 0.128 0.119 37 14-19-27 180 0.209 0.205 35 15-20-28 95 0.183 0.167 42 14-21-34 135 0.154 0.121 40 12-17-25 105 0.251 0.244 40 15-23-36 165 0.151 0.133 40 14-19-27 105 0.385 0.381 37 15-23-36 188 0.176 0.163 41 16-21-29 210 0.284 0.278 39 18-22-31 110 0.246 0.224 45 16-24-37 155 0.203 0.160 43 13-19-26 120 0.328 0.318 43 17-26-39 190 0.201 0.176 44 16-21-29 120 0.503 0.498 41 17-26-39 215 0.231 0.214 44 18-22-31 240 0.371 0.364 42 19-23-33 80 0.123 0.112 32 12-17-32 108 0.149 0.128 28 9-14-22 90 0.099 0.093 30 13-20-34 150 0.143 0.127 32 13-18-26 115 0.138 0.134 34 17-25-38 165 0.116 0.106 31 14-19-27 198 0.110 0.105 32 17-21-30 100 0.193 0.175 37 15-22-35 130 0.218 0.187 33 11-17-24 110 0.147 0.139 35 16-24-37 180 0.206 0.183 36 15-20-28 140 0.205 0.198 38 20-30-42 200 0.171 0.156 36 17-21-30 240 0.162 0.155 36 19-23-33 120 0.278 0.252 41 17-26-39 153 0.299 0.258 36 13-19-26 130 0.206 0.194 39 19-28-40 210 0.280 0.250 40 18-22-31 165 0.285 0.275 42 24-32-45 235 0.236 0.216 40 19-23-33 283 0.225 0.214 40 21-25-36 140 0.378 0.343 45 20-30-42 175 0.394 0.340 40 15-20-28 150 0.274 0.258 43 22-31-43 240 0.366 0.326 43 19-23-33 190 0.378 0.365 45 28-34-49 270 0.312 0.285 43 20-25-35 325 0.298 0.283 43 22-27-38 Redefine your comfort zone. ™ | www.titus-hvac.com ML-39 / 1" SLOT SPACING WIDTH / ONE-SLOT / SUPPLY WITH MP-39 PLENUM F ML-37 / ½" SLOT SPACING WIDTH / TWO-SLOT / SUPPLY WITH MP-37 PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. 20 0.008 0.007 1-2-8 40 0.021 0.018 1-3-10 30 0.011 0.010 2-5-13 60 0.023 0.020 3-7-15 40 0.017 0.016 4-8-17 60 0.015 0.014 3-7-15 70 0.014 0.013 4-9-18 40 0.031 0.028 15 4-8-17 63 0.050 0.043 15 3-7-16 50 0.030 0.029 17 6-11-22 90 0.051 0.046 20 7-12-20 65 0.044 0.043 20 9-14-28 95 0.039 0.035 18 7-12-21 113 0.036 0.034 18 10-14-23 60 0.069 0.063 25 8-13-26 85 0.093 0.080 22 6-11-20 70 0.060 0.056 24 10-15-30 120 0.091 0.082 27 10-15-23 90 0.085 0.082 28 13-20-34 130 0.072 0.066 26 11-17-24 155 0.068 0.064 26 13-19-26 Performance notes appear at end of performance data PERFORMANCE DATA 8" Inlet Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw F35 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ML-38, -TZ / ¾" SLOT SPACING WIDTH / TWO-SLOT / SUPPLY WITH MP-38 PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. F 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 30 0.010 0.009 1-3-10 50 0.016 0.011 1-3-10 40 0.014 0.013 2-5-14 60 0.013 0.010 2-4-13 50 0.024 0.023 3-7-18 70 0.013 0.011 2-5-15 90 0.018 0.017 4-8-19 50 0.028 0.024 16 3-7-18 80 0.040 0.029 16 3-6-17 65 0.038 0.035 18 5-12-23 95 0.031 0.025 16 4-9-20 75 0.054 0.052 18 7-13-27 110 0.032 0.027 17 5-12-22 140 0.044 0.041 19 9-15-25 70 0.055 0.047 24 6-12-25 110 0.076 0.055 24 5-12-22 90 0.072 0.067 26 10-16-32 130 0.059 0.047 24 8-14-24 100 0.096 0.092 25 12-18-35 150 0.059 0.051 24 10-16-26 190 0.080 0.076 26 13-20-29 90 0.092 0.077 30 10-16-32 140 0.124 0.089 29 9-15-25 115 0.118 0.109 31 14-20-38 165 0.095 0.076 29 12-17-27 125 0.149 0.144 31 15-22-40 190 0.094 0.081 30 13-20-29 240 0.128 0.120 31 17-23-33 110 0.137 0.115 34 13-20-37 170 0.182 0.131 34 12-18-28 140 0.174 0.161 36 17-25-42 200 0.139 0.111 34 14-21-30 150 0.215 0.207 35 18-27-43 230 0.138 0.119 34 16-23-32 290 0.187 0.176 36 20-26-36 130 0.191 0.161 38 15-23-40 200 0.252 0.181 38 14-21-30 165 0.242 0.224 40 20-29-45 235 0.192 0.154 38 16-23-33 175 0.292 0.281 39 21-31-47 270 0.190 0.164 38 19-25-35 340 0.257 0.242 40 23-28-39 150 0.255 0.214 42 18-27-43 230 0.334 0.239 41 16-23-32 190 0.321 0.296 43 23-34-49 270 0.253 0.203 41 19-25-35 200 0.382 0.367 42 24-35-50 310 0.251 0.216 41 22-26-37 390 0.339 0.318 43 24-30-42 90 0.068 0.054 30 7-14-28 140 0.107 0.072 30 6-13-25 108 0.064 0.056 30 10-17-33 165 0.075 0.056 30 8-15-27 115 0.066 0.061 29 11-18-35 180 0.061 0.049 29 9-16-28 225 0.066 0.059 30 14-20-32 110 0.102 0.081 35 10-17-34 170 0.158 0.106 34 8-15-28 130 0.094 0.082 35 13-20-40 200 0.110 0.082 34 12-18-30 140 0.098 0.091 34 14-22-42 220 0.091 0.074 34 13-20-31 270 0.095 0.086 34 16-24-35 130 0.143 0.113 39 13-20-40 200 0.218 0.147 38 12-18-30 153 0.129 0.113 38 16-23-44 235 0.152 0.114 38 14-21-33 165 0.136 0.126 38 17-25-45 260 0.128 0.103 38 16-24-34 315 0.130 0.116 38 19-27-38 150 0.190 0.150 42 15-23-43 230 0.288 0.194 42 14-21-32 175 0.170 0.149 42 18-27-47 270 0.200 0.150 41 16-24-35 190 0.180 0.167 41 20-29-49 300 0.170 0.137 41 18-26-37 360 0.170 0.152 41 22-28-40 ML-39 / 1" SLOT SPACING WIDTH / TWO-SLOT / SUPPLY WITH MP-39 PLENUM 2 ft. 6" nlet 4 ft. PERFORMANCE DATA 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet F36 F36 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 30 0.008 0.006 1-2-7 50 0.014 0.009 1-2-7 40 0.009 0.008 1-3-12 60 0.010 0.007 1-2-9 40 0.008 0.007 1-3-12 60 0.007 0.005 1-2-9 90 0.011 0.010 2-5-16 50 0.021 0.017 16 2-5-15 80 0.035 0.023 17 2-4-15 63 0.022 0.019 17 3-7-19 95 0.025 0.019 17 3-6-17 65 0.021 0.020 16 3-8-20 100 0.019 0.015 15 3-7-18 135 0.024 0.021 18 5-12-24 70 0.041 0.033 24 4-9-22 110 0.066 0.044 24 4-8-20 85 0.040 0.035 25 6-13-26 130 0.046 0.035 24 5-11-24 90 0.040 0.038 23 7-14-28 140 0.037 0.030 23 6-13-25 180 0.042 0.038 25 9-16-28 Performance notes appear at end of performance data diffusers PERFORMANCE DATA 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 35 0.018 0.016 2-4-12 60 0.041 0.034 2-4-13 45 0.016 0.015 3-6-16 70 0.025 0.022 2-5-15 50 0.014 0.014 3-7-18 80 0.020 0.018 3-6-17 90 0.014 0.013 4-8-19 55 0.045 0.039 17 4-9-20 85 0.081 0.068 16 3-7-18 68 0.036 0.033 17 6-12-24 105 0.056 0.049 17 5-11-22 78 0.035 0.032 18 8-14-28 120 0.046 0.040 18 6-13-23 138 0.033 0.030 17 8-14-25 75 0.083 0.073 24 7-13-27 110 0.136 0.115 22 5-12-22 90 0.064 0.058 24 10-16-32 140 0.100 0.087 24 9-15-25 105 0.064 0.060 25 12-19-36 160 0.081 0.072 25 11-17-27 185 0.059 0.055 24 13-19-29 95 0.133 0.117 30 11-17-34 135 0.205 0.173 27 8-14-25 113 0.100 0.091 30 13-20-38 175 0.157 0.136 29 12-18-28 133 0.101 0.095 31 16-24-41 200 0.127 0.112 30 14-21-30 233 0.093 0.086 29 16-23-32 115 0.195 0.171 34 14-20-38 160 0.288 0.242 31 11-17-27 135 0.144 0.131 34 16-24-41 210 0.226 0.195 34 15-22-31 160 0.147 0.138 35 19-28-45 240 0.183 0.162 34 17-23-33 280 0.135 0.125 34 20-25-35 135 0.268 0.236 38 16-24-41 185 0.385 0.324 35 13-19-29 158 0.196 0.179 37 19-28-44 245 0.307 0.266 37 17-23-33 188 0.203 0.190 39 22-33-48 280 0.249 0.220 38 20-25-35 328 0.185 0.171 37 22-27-38 155 0.354 0.311 41 18-28-44 210 0.496 0.417 38 15-22-31 180 0.256 0.233 41 21-32-47 280 0.401 0.347 41 20-25-35 215 0.266 0.250 42 25-37-52 320 0.325 0.288 41 22-27-38 375 0.243 0.224 41 24-29-41 140 0.150 0.115 34 14-20-41 220 0.251 0.165 34 12-19-31 170 0.137 0.118 34 16-25-46 260 0.172 0.125 34 15-22-34 200 0.161 0.146 36 19-29-50 300 0.152 0.120 35 17-26-37 360 0.142 0.125 35 21-28-40 165 0.209 0.160 38 16-24-45 258 0.344 0.226 38 15-22-34 200 0.190 0.163 38 19-29-50 305 0.236 0.172 38 17-26-37 235 0.222 0.202 39 23-34-54 350 0.208 0.163 38 20-28-40 420 0.193 0.169 38 24-31-43 190 0.277 0.212 41 18-28-49 295 0.452 0.296 41 17-25-36 230 0.252 0.215 42 22-33-54 350 0.311 0.227 41 20-28-40 270 0.293 0.267 43 26-39-58 400 0.271 0.213 41 23-30-42 480 0.252 0.221 41 27-33-46 Redefine your comfort zone. ™ | www.titus-hvac.com ML-37 / ½" SLOT SPACING WIDTH / THREE-SLOT / SUPPLY WITH MP-37 PLENUM F ML-38, -TZ / ¾" SLOT SPACING WIDTH / THREE-SLOT / SUPPLY WITH MP-38 PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. 40 0.012 0.009 1-2-10 70 0.025 0.017 1-3-11 50 0.012 0.010 2-4-15 80 0.016 0.012 2-4-14 60 0.014 0.013 2-6-17 100 0.017 0.013 2-6-17 120 0.016 0.014 4-8-21 65 0.032 0.025 16 3-7-19 108 0.060 0.039 17 3-6-18 80 0.030 0.026 17 4-10-23 125 0.040 0.029 17 4-9-21 95 0.036 0.033 18 6-14-28 150 0.038 0.030 18 6-12-26 180 0.036 0.031 18 8-15-28 90 0.062 0.048 23 6-13-26 145 0.109 0.072 24 5-12-25 110 0.058 0.049 24 8-16-32 170 0.073 0.053 24 7-15-28 130 0.068 0.062 25 12-19-38 200 0.068 0.053 25 10-17-30 240 0.063 0.055 25 14-21-33 115 0.101 0.078 29 9-17-33 183 0.173 0.113 29 8-16-29 140 0.093 0.080 30 14-20-41 215 0.117 0.086 29 11-18-31 165 0.110 0.100 31 16-24-45 250 0.106 0.083 30 14-21-34 300 0.099 0.086 30 17-26-37 Performance notes appear at end of performance data PERFORMANCE DATA 8" Inlet Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw F37 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ML-39 / 1" SLOT SPACING WIDTH / THREE-SLOT / SUPPLY WITH MP-39 PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. F 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 40 0.010 0.007 1-2-6 70 0.023 0.014 1-2-7 50 0.016 0.014 1-3-10 80 0.014 0.009 1-2-9 60 0.009 0.008 2-4-15 90 0.011 0.008 1-3-12 100 0.008 0.006 2-4-14 65 0.027 0.019 16 2-4-16 108 0.054 0.034 17 2-4-16 80 0.040 0.036 17 3-6-20 125 0.034 0.023 17 2-6-19 95 0.024 0.020 18 4-9-24 140 0.027 0.020 17 3-7-21 165 0.021 0.017 17 4-10-24 90 0.051 0.037 24 4-8-23 145 0.099 0.061 24 3-8-21 110 0.076 0.068 24 5-12-28 170 0.063 0.043 24 5-10-25 130 0.044 0.038 26 8-16-33 190 0.049 0.036 24 6-13-28 230 0.041 0.034 24 8-17-32 115 0.083 0.060 30 6-13-29 183 0.157 0.097 30 5-12-27 140 0.124 0.110 30 9-18-35 215 0.100 0.069 30 7-16-31 165 0.071 0.061 31 12-21-41 240 0.079 0.058 30 9-18-33 295 0.067 0.055 30 14-22-36 140 0.124 0.089 34 9-18-35 220 0.228 0.141 34 8-16-31 170 0.182 0.162 35 13-21-43 260 0.147 0.100 34 11-19-34 200 0.104 0.090 36 17-25-50 290 0.115 0.084 34 13-21-36 360 0.100 0.082 35 18-27-40 165 0.172 0.123 38 12-21-41 258 0.312 0.194 38 11-19-34 200 0.252 0.225 39 17-25-50 305 0.202 0.138 38 15-23-37 235 0.144 0.124 40 20-30-54 340 0.158 0.116 38 17-25-39 425 0.139 0.114 39 21-31-44 190 0.228 0.163 41 16-24-48 295 0.410 0.254 41 14-22-36 230 0.334 0.297 42 19-29-54 350 0.266 0.182 41 17-26-40 270 0.190 0.164 43 23-34-58 390 0.208 0.152 41 19-29-42 490 0.185 0.152 42 24-33-47 108 0.149 0.128 28 10-17-33 138 0.199 0.165 23 6-12-25 140 0.125 0.111 30 14-22-42 188 0.161 0.137 27 10-17-29 165 0.116 0.106 31 17-25-45 240 0.157 0.136 30 15-22-33 295 0.118 0.106 30 18-26-36 130 0.218 0.187 33 13-20-40 160 0.269 0.224 27 7-15-27 170 0.184 0.164 35 17-26-46 230 0.243 0.206 31 14-21-32 200 0.171 0.156 36 21-31-50 290 0.230 0.199 34 18-26-36 360 0.175 0.158 35 22-28-40 153 0.299 0.258 36 16-23-44 183 0.350 0.291 30 10-17-29 200 0.254 0.227 39 21-31-50 273 0.341 0.290 35 16-25-35 235 0.236 0.216 40 24-36-54 340 0.316 0.274 38 21-28-39 425 0.244 0.220 39 25-31-44 175 0.394 0.340 40 18-27-47 205 0.442 0.367 33 12-19-30 230 0.336 0.300 42 24-35-54 315 0.456 0.387 39 19-27-38 270 0.312 0.285 43 28-41-58 390 0.415 0.360 41 24-30-42 490 0.325 0.292 42 27-33-47 ML-37 / ½" SLOT SPACING WIDTH / FOUR-SLOT / SUPPLY WITH MP-37 PLENUM 2 ft. 6" Inlet 4 ft. PERFORMANCE DATA 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet F38 F38 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 40 0.021 0.018 1-3-12 70 0.052 0.043 1-3-13 50 0.016 0.014 2-5-15 60 0.017 0.014 1-2-9 60 0.015 0.014 3-7-18 90 0.022 0.019 2-5-16 100 0.014 0.012 3-7-18 63 0.050 0.043 15 3-7-19 93 0.090 0.075 14 2-6-17 80 0.041 0.036 17 5-12-25 103 0.048 0.041 12 3-7-19 95 0.039 0.035 18 7-15-29 140 0.054 0.046 17 6-13-25 165 0.037 0.033 17 8-15-27 85 0.093 0.080 22 6-13-26 115 0.139 0.116 19 4-9-21 110 0.077 0.069 25 10-17-34 145 0.097 0.082 21 6-13-26 130 0.072 0.066 26 13-20-40 190 0.099 0.086 24 11-17-29 230 0.072 0.064 25 14-21-32 Performance notes appear at end of performance data diffusers PERFORMANCE DATA 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 50 0.016 0.011 1-3-10 90 0.038 0.024 1-3-12 70 0.017 0.014 2-5-18 100 0.022 0.015 2-4-14 70 0.013 0.011 2-5-18 120 0.020 0.014 2-5-18 130 0.013 0.011 3-6-19 80 0.040 0.029 16 3-6-20 125 0.074 0.046 16 2-6-19 105 0.038 0.031 19 5-11-26 155 0.052 0.036 17 4-9-23 110 0.032 0.027 17 5-12-28 185 0.047 0.034 19 5-12-27 210 0.034 0.028 18 7-16-31 110 0.076 0.055 24 5-12-28 160 0.121 0.075 22 4-9-24 140 0.068 0.055 25 9-18-35 210 0.096 0.065 24 7-16-31 150 0.059 0.051 24 10-19-38 250 0.085 0.063 26 10-19-34 290 0.065 0.053 25 13-21-36 140 0.124 0.089 29 9-18-35 195 0.179 0.111 27 6-14-29 175 0.106 0.085 31 14-22-44 265 0.152 0.104 30 11-20-35 190 0.094 0.081 30 16-24-48 315 0.135 0.099 31 16-23-38 370 0.105 0.087 31 18-27-41 170 0.182 0.131 34 13-21-43 230 0.249 0.155 31 8-17-32 210 0.153 0.123 35 18-26-51 320 0.222 0.152 34 16-24-38 230 0.138 0.119 34 19-29-54 380 0.197 0.145 36 19-28-41 450 0.156 0.128 36 22-32-45 200 0.252 0.181 38 17-25-50 265 0.331 0.205 34 11-20-35 245 0.209 0.167 39 21-31-55 375 0.305 0.208 38 19-28-41 270 0.190 0.164 38 23-34-58 445 0.270 0.198 39 22-32-45 530 0.216 0.178 39 26-35-49 230 0.334 0.239 41 19-29-54 300 0.424 0.263 37 14-22-37 280 0.272 0.218 42 23-35-59 430 0.401 0.274 41 21-31-44 310 0.251 0.216 41 26-39-62 510 0.355 0.261 43 25-34-48 610 0.286 0.236 43 30-37-52 148 0.119 0.080 31 6-14-32 210 0.193 0.114 29 5-10-27 165 0.148 0.130 30 8-18-36 270 0.141 0.090 31 8-17-35 190 0.068 0.055 30 11-21-41 285 0.094 0.065 29 8-18-36 360 0.076 0.059 31 13-23-40 180 0.177 0.119 36 9-20-39 250 0.274 0.162 33 6-15-32 200 0.218 0.190 34 12-22-44 330 0.210 0.135 35 11-21-39 230 0.100 0.081 35 15-25-50 350 0.142 0.098 34 13-22-40 440 0.114 0.088 35 19-28-44 213 0.246 0.165 40 13-23-46 290 0.368 0.218 36 9-19-36 235 0.301 0.263 38 16-26-51 390 0.294 0.189 39 16-25-42 270 0.138 0.111 39 20-29-58 415 0.200 0.137 38 18-27-43 520 0.159 0.123 39 22-33-48 245 0.327 0.220 43 18-27-53 330 0.477 0.282 39 11-21-39 270 0.397 0.347 41 20-29-58 450 0.391 0.251 43 19-29-45 310 0.181 0.147 42 22-34-62 480 0.267 0.184 42 21-31-46 600 0.212 0.164 43 26-37-52 Redefine your comfort zone. ™ | www.titus-hvac.com ML-38, -TZ / ¾" SLOT SPACING WIDTH / FOUR-SLOT / SUPPLY WITH MP-38 PLENUM F ML-39 / 1" SLOT SPACING WIDTH / FOUR-SLOT / SUPPLY WITH MP-39 PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. 50 0.014 0.009 1-2-7 90 0.035 0.021 1-2-8 60 0.020 0.017 1-2-9 90 0.016 0.010 1-2-8 70 0.009 0.007 1-3-13 90 0.009 0.006 1-2-8 120 0.008 0.007 1-3-13 83 0.037 0.025 17 2-4-18 130 0.074 0.044 17 2-4-16 95 0.049 0.043 17 3-6-21 150 0.043 0.028 17 2-5-19 110 0.023 0.018 17 4-8-24 155 0.028 0.019 15 2-6-20 200 0.024 0.018 17 4-9-26 115 0.072 0.048 25 4-9-25 170 0.127 0.075 24 3-7-22 130 0.092 0.080 24 5-11-28 210 0.085 0.055 25 5-10-27 150 0.042 0.034 25 7-15-33 220 0.056 0.039 23 5-11-28 280 0.046 0.036 25 8-18-35 Performance notes appear at end of performance data PERFORMANCE DATA 8" Inlet Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw F39 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ML-37-SP / ½" SLOT SPACING WIDTH / ONE-SLOT / SUPPLY WITH MP-37-SP PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. F 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 15 0.012 0.011 1-3-10 30 0.021 0.019 2-5-9 20 0.021 0.021 3-6-13 35 0.018 0.017 3-5-10 25 0.047 0.047 4-8-16 40 0.020 0.019 4-6-10 45 0.030 0.029 5-7-11 25 0.032 0.031 17 4-8-16 45 0.047 0.043 20 5-7-11 30 0.048 0.047 17 6-10-19 53 0.040 0.038 20 5-8-12 35 0.092 0.092 18 8-11-21 63 0.049 0.048 21 6-9-13 68 0.067 0.066 19 7-9-13 35 0.063 0.061 25 8-11-21 60 0.083 0.077 27 6-9-13 40 0.085 0.084 24 9-13-23 70 0.071 0.068 26 7-10-14 45 0.152 0.151 24 10-15-24 85 0.091 0.088 28 9-11-15 90 0.119 0.118 26 9-11-15 45 0.105 0.101 31 10-15-24 75 0.130 0.120 32 8-10-14 50 0.133 0.132 29 11-16-25 88 0.111 0.106 32 9-11-15 55 0.227 0.226 29 12-18-26 108 0.145 0.141 34 10-12-17 113 0.186 0.184 31 10-12-17 55 0.156 0.151 35 12-18-26 90 0.187 0.172 36 9-11-15 60 0.192 0.190 33 13-19-28 105 0.161 0.153 36 10-12-17 65 0.317 0.316 33 14-20-29 130 0.212 0.206 38 11-13-19 135 0.267 0.265 35 11-13-19 65 0.218 0.211 39 14-20-29 105 0.254 0.235 40 10-12-17 70 0.262 0.258 37 15-21-30 123 0.219 0.208 40 10-13-18 75 0.423 0.421 36 16-22-31 153 0.291 0.283 42 12-14-20 158 0.364 0.360 39 12-14-20 75 0.291 0.281 43 16-22-31 120 0.332 0.306 43 10-13-18 80 0.342 0.337 40 17-23-32 140 0.285 0.272 43 11-14-19 85 0.543 0.540 39 18-23-33 175 0.384 0.373 45 12-15-22 180 0.475 0.471 42 13-15-22 70 0.213 0.205 36 12-18-30 115 0.179 0.155 37 10-12-18 65 0.295 0.293 30 11-17-29 150 0.240 0.224 40 12-14-20 50 0.383 0.382 21 9-13-25 140 0.224 0.217 35 11-14-19 115 0.296 0.294 26 10-12-18 83 0.297 0.284 40 15-22-32 135 0.247 0.214 41 11-13-19 75 0.393 0.389 34 13-20-31 178 0.336 0.314 44 13-15-22 55 0.463 0.462 24 10-15-26 165 0.311 0.301 39 12-15-21 130 0.378 0.376 29 11-13-19 95 0.393 0.377 43 17-25-35 155 0.325 0.282 44 12-14-20 85 0.505 0.500 37 15-22-33 205 0.448 0.419 47 14-17-23 60 0.551 0.550 26 11-16-28 190 0.413 0.400 42 13-16-23 145 0.470 0.467 32 11-14-20 ML-38-SP, -TZ / ¾" SLOT SPACING WIDTH / ONE-SLOT / SUPPLY WITH MP-38-SP PLENUM 2 ft. 6" Inlet 4 ft. PERFORMANCE DATA 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet F40 F40 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 20 0.017 0.017 1-3-11 35 0.017 0.014 2-4-9 25 0.044 0.043 2-5-13 40 0.017 0.016 2-5-10 30 0.138 0.137 3-7-16 40 0.018 0.018 2-5-10 55 0.068 0.067 4-7-12 33 0.046 0.044 18 4-9-17 55 0.041 0.036 20 4-7-12 35 0.086 0.085 16 4-9-18 68 0.049 0.045 21 6-8-13 35 0.187 0.187 13 4-9-18 65 0.048 0.047 17 5-8-13 70 0.110 0.109 15 6-9-14 45 0.088 0.085 26 7-12-24 75 0.076 0.066 27 6-9-14 45 0.142 0.140 22 7-12-24 95 0.096 0.090 29 8-11-16 40 0.245 0.244 16 6-11-21 90 0.093 0.090 25 7-11-15 85 0.162 0.161 19 7-11-15 58 0.144 0.138 31 10-15-27 95 0.122 0.106 33 8-11-16 55 0.212 0.209 26 10-15-26 123 0.160 0.150 35 10-13-18 45 0.310 0.309 19 7-12-24 115 0.151 0.146 31 10-12-18 100 0.224 0.222 23 8-12-16 Performance notes appear at end of performance data diffusers PERFORMANCE DATA 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 20 0.010 0.009 1-2-8 35 0.012 0.010 1-2-8 30 0.025 0.024 13 2-5-14 40 0.011 0.010 1-3-9 30 0.038 0.037 2-5-14 50 0.015 0.014 11 2-5-11 60 0.028 0.027 11 3-6-13 35 0.030 0.028 20 3-6-16 55 0.031 0.025 20 2-6-12 45 0.055 0.054 22 5-10-21 65 0.028 0.025 20 3-7-13 43 0.076 0.075 18 4-9-19 78 0.036 0.034 22 5-8-14 90 0.063 0.061 21 6-10-15 50 0.061 0.056 29 6-11-23 75 0.057 0.047 28 5-8-14 60 0.098 0.096 29 8-14-27 90 0.054 0.048 28 6-10-15 55 0.127 0.125 24 7-13-25 105 0.066 0.062 29 8-11-17 120 0.111 0.109 28 9-13-18 65 0.103 0.095 35 10-15-29 95 0.091 0.075 33 7-10-16 75 0.154 0.150 34 11-17-31 115 0.088 0.079 34 8-12-18 68 0.191 0.189 29 10-15-29 133 0.105 0.099 34 10-13-19 150 0.174 0.171 33 11-14-20 80 0.155 0.144 40 12-18-32 115 0.134 0.110 38 8-12-18 90 0.221 0.216 38 14-21-34 140 0.131 0.117 38 10-14-19 80 0.268 0.265 33 12-18-32 160 0.153 0.144 39 11-15-21 180 0.250 0.246 37 13-15-22 95 0.219 0.203 44 14-22-35 135 0.184 0.152 42 10-13-19 105 0.301 0.293 42 16-24-37 165 0.181 0.163 42 12-15-21 93 0.358 0.355 36 14-21-34 188 0.210 0.197 43 13-16-22 210 0.340 0.334 41 14-17-24 110 0.294 0.272 47 17-25-37 155 0.243 0.200 45 11-14-20 120 0.393 0.383 45 18-27-39 190 0.240 0.215 46 13-16-23 105 0.461 0.457 39 16-24-37 215 0.276 0.260 46 14-17-24 240 0.445 0.437 44 15-18-25 100 0.231 0.213 39 15-23-36 130 0.260 0.230 35 9-13-19 120 0.210 0.200 39 18-27-39 170 0.220 0.200 37 12-15-21 140 0.246 0.238 40 11-14-19 185 0.175 0.163 36 13-16-22 240 0.194 0.187 38 15-18-25 120 0.332 0.306 43 18-27-39 153 0.358 0.317 38 11-14-20 143 0.296 0.282 43 22-30-43 200 0.304 0.277 41 13-16-23 165 0.341 0.331 44 12-15-21 218 0.242 0.225 40 14-17-24 283 0.269 0.259 42 16-19-27 140 0.452 0.417 47 21-30-42 175 0.472 0.417 42 12-15-22 165 0.396 0.378 47 25-32-46 230 0.402 0.366 44 14-18-25 190 0.452 0.439 47 13-16-23 250 0.320 0.297 43 15-18-26 325 0.356 0.342 45 17-21-29 Redefine your comfort zone. ™ | www.titus-hvac.com ML-39-SP / 1" SLOT SPACING WIDTH / ONE-SLOT / SUPPLY WITH MP-39-SP PLENUM F ML-37-SP / ½" SLOT SPACING WIDTH / TWO-SLOT / SUPPLY WITH MP-37-SP PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. 20 0.009 0.009 1-2-8 40 0.025 0.022 1-3-9 30 0.013 0.012 2-5-14 50 0.019 0.017 2-5-11 40 0.020 0.019 4-6-10 55 0.015 0.014 2-6-12 70 0.017 0.016 4-8-14 40 0.037 0.034 17 4-8-18 63 0.060 0.053 17 3-7-13 53 0.040 0.038 20 6-12-24 80 0.049 0.044 19 5-9-15 65 0.053 0.051 22 7-9-13 88 0.039 0.036 18 6-9-15 113 0.043 0.041 20 8-12-17 60 0.083 0.077 27 8-14-27 85 0.111 0.098 24 6-9-15 75 0.082 0.078 28 11-17-31 110 0.092 0.084 27 8-12-17 90 0.101 0.099 30 9-11-15 120 0.074 0.068 26 9-13-18 155 0.081 0.078 28 11-14-20 80 0.148 0.136 34 12-18-32 108 0.178 0.157 30 8-12-17 98 0.138 0.132 34 15-22-35 140 0.149 0.136 32 10-14-19 115 0.166 0.161 36 10-12-18 153 0.119 0.111 32 11-14-20 198 0.132 0.126 34 13-16-23 Performance notes appear at end of performance data PERFORMANCE DATA 8" Inlet Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw F41 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ML-38-SP, -TZ / ¾" SLOT SPACING WIDTH / TWO-SLOT / SUPPLY WITH MP-38-SP PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. F 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 30 0.012 0.011 1-3-10 50 0.019 0.014 1-3-9 40 0.017 0.016 2-5-15 60 0.015 0.013 2-4-11 50 0.029 0.028 3-6-12 70 0.015 0.014 2-5-12 90 0.022 0.021 4-8-15 50 0.034 0.029 18 3-7-19 80 0.048 0.037 18 3-6-14 65 0.045 0.042 20 5-12-24 93 0.036 0.030 18 4-8-16 75 0.064 0.062 20 6-9-14 110 0.038 0.033 19 5-10-17 143 0.054 0.051 21 8-13-19 70 0.066 0.058 26 6-13-26 110 0.091 0.070 26 5-10-17 90 0.086 0.081 28 10-17-34 125 0.065 0.054 25 7-11-18 100 0.114 0.111 27 8-12-16 150 0.070 0.062 26 9-13-20 195 0.101 0.096 28 11-16-23 90 0.110 0.095 32 10-17-34 140 0.148 0.113 31 8-12-19 115 0.141 0.132 33 14-21-38 158 0.103 0.086 30 9-14-20 125 0.179 0.173 33 10-13-18 190 0.113 0.100 32 11-16-23 248 0.163 0.155 34 15-18-26 110 0.164 0.142 36 14-21-37 170 0.218 0.167 36 10-15-21 140 0.209 0.195 38 17-26-42 190 0.150 0.125 35 11-16-23 150 0.257 0.249 37 12-14-20 230 0.165 0.146 36 13-18-25 300 0.240 0.228 39 16-20-28 130 0.229 0.199 40 16-24-41 200 0.302 0.231 40 12-16-23 165 0.290 0.271 42 21-31-46 223 0.206 0.172 38 13-17-24 175 0.350 0.339 41 12-15-22 270 0.228 0.201 40 15-19-27 353 0.331 0.314 42 18-22-31 150 0.305 0.265 44 19-28-44 230 0.399 0.305 43 13-18-25 190 0.385 0.360 45 24-35-49 255 0.271 0.226 42 15-18-26 200 0.457 0.443 44 13-16-23 310 0.300 0.265 43 17-20-29 405 0.437 0.415 46 19-23-33 120 0.146 0.120 39 12-19-39 180 0.211 0.153 38 9-14-22 140 0.131 0.117 38 15-23-42 210 0.145 0.115 37 11-16-24 160 0.153 0.144 39 17-26-45 240 0.130 0.109 38 12-18-25 290 0.132 0.120 38 15-20-28 143 0.205 0.169 43 15-23-43 213 0.295 0.214 42 11-16-24 165 0.181 0.163 42 18-27-46 248 0.201 0.159 41 13-18-26 190 0.216 0.203 43 20-31-49 285 0.184 0.154 42 14-19-28 340 0.181 0.165 42 17-21-30 165 0.275 0.227 46 18-27-46 245 0.392 0.284 45 12-18-26 190 0.240 0.215 46 20-31-49 285 0.267 0.211 45 14-19-28 220 0.289 0.272 46 24-36-53 330 0.246 0.207 45 17-21-30 390 0.238 0.218 45 19-23-32 ML-39-SP / 1" SLOT SPACING WIDTH / TWO-SLOT / SUPPLY WITH MP-SP PLENUM 2 ft. 6" Inlet 4 ft. PERFORMANCE DATA 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet F42 F42 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 30 0.009 0.008 1-2-7 50 0.016 0.012 1-2-7 40 0.011 0.010 1-3-12 60 0.012 0.009 1-2-9 40 0.010 0.009 1-3-12 60 0.008 0.007 1-2-9 90 0.013 0.012 2-5-14 53 0.028 0.023 19 2-5-17 83 0.044 0.032 19 2-4-13 65 0.028 0.025 20 3-8-21 98 0.031 0.025 19 3-6-15 70 0.029 0.028 19 4-9-23 105 0.025 0.021 18 3-7-16 140 0.031 0.028 21 6-11-19 75 0.057 0.047 28 5-10-24 115 0.086 0.063 27 4-9-18 90 0.054 0.048 28 7-15-29 135 0.060 0.047 27 5-10-19 100 0.060 0.056 28 8-16-32 150 0.051 0.043 27 7-11-20 190 0.057 0.052 28 10-14-23 98 0.096 0.079 34 8-16-32 148 0.142 0.103 33 6-11-20 115 0.088 0.079 34 11-19-37 173 0.098 0.077 33 9-13-21 130 0.101 0.095 34 14-21-41 195 0.086 0.072 33 10-15-23 240 0.090 0.082 34 12-18-25 Performance notes appear at end of performance data diffusers PERFORMANCE DATA 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 35 0.022 0.019 2-4-13 60 0.049 0.042 2-4-11 45 0.019 0.018 3-6-17 70 0.030 0.027 2-5-12 50 0.017 0.016 3-7-19 80 0.024 0.022 3-6-14 90 0.017 0.016 4-8-15 55 0.053 0.048 19 4-9-21 80 0.086 0.075 17 3-6-14 70 0.046 0.043 20 6-13-26 105 0.068 0.060 19 5-9-17 78 0.041 0.039 20 8-14-29 118 0.052 0.047 19 6-10-18 138 0.039 0.037 19 8-12-19 75 0.099 0.089 26 7-14-28 100 0.135 0.117 22 4-9-16 95 0.085 0.079 28 11-18-35 140 0.120 0.107 26 8-12-19 105 0.076 0.072 27 13-20-37 155 0.091 0.082 26 9-14-20 185 0.071 0.066 26 11-16-22 95 0.159 0.143 32 11-18-35 120 0.194 0.168 26 6-11-18 120 0.136 0.126 33 15-22-39 175 0.188 0.166 31 10-15-22 133 0.121 0.115 33 16-25-41 193 0.141 0.127 31 11-16-23 233 0.112 0.105 31 14-18-25 115 0.233 0.210 36 14-21-38 140 0.264 0.229 30 8-12-19 145 0.199 0.184 38 18-27-43 210 0.270 0.240 36 12-17-24 160 0.177 0.167 37 20-30-45 230 0.201 0.182 35 13-18-25 280 0.162 0.152 36 16-19-27 135 0.321 0.289 40 17-25-41 160 0.345 0.299 33 9-14-21 170 0.273 0.253 41 21-32-46 245 0.368 0.326 39 14-18-26 188 0.242 0.230 41 23-35-49 268 0.272 0.246 39 15-19-27 328 0.222 0.207 39 17-21-30 155 0.424 0.381 43 19-29-44 180 0.436 0.379 36 11-15-22 195 0.359 0.333 45 24-35-50 280 0.480 0.426 43 16-19-27 215 0.319 0.302 44 27-37-52 305 0.353 0.319 42 16-20-29 375 0.291 0.272 43 18-22-32 165 0.250 0.201 40 17-25-46 258 0.412 0.294 40 12-18-26 200 0.228 0.200 40 20-30-50 330 0.331 0.256 41 16-21-30 260 0.325 0.301 44 26-40-57 375 0.285 0.234 42 18-22-32 445 0.260 0.233 42 20-24-34 190 0.331 0.267 43 19-29-49 295 0.541 0.385 43 14-20-28 230 0.301 0.265 44 23-35-54 380 0.439 0.339 45 18-23-32 300 0.433 0.401 47 30-44-62 430 0.375 0.308 45 20-24-34 510 0.341 0.306 45 21-26-37 Redefine your comfort zone. ™ | www.titus-hvac.com ML-37-SP / ½" SLOT SPACING WIDTH / THREE-SLOT / SUPPLY WITH MP-37-SP PLENUM F ML-38-SP, -TZ / ¾" SLOT SPACING WIDTH / THREE-SLOT / SUPPLY WITH MP-38-SP PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. 40 0.015 0.012 1-2-10 70 0.030 0.022 1-3-10 50 0.014 0.013 2-4-15 80 0.019 0.015 2-4-11 60 0.017 0.016 2-6-18 100 0.020 0.017 2-6-14 120 0.019 0.017 4-8-17 65 0.039 0.031 18 3-7-20 108 0.072 0.051 19 3-6-15 80 0.036 0.032 19 4-10-24 130 0.051 0.040 19 4-9-19 100 0.048 0.045 21 7-15-30 155 0.049 0.040 21 6-11-20 185 0.045 0.040 21 8-13-22 90 0.074 0.060 25 6-13-27 145 0.131 0.093 26 5-10-20 110 0.069 0.061 26 8-17-34 180 0.099 0.076 27 8-13-22 140 0.094 0.087 29 14-21-42 210 0.089 0.073 28 10-15-24 250 0.082 0.074 28 12-18-26 115 0.121 0.098 31 9-18-35 183 0.207 0.147 31 8-13-22 140 0.112 0.098 32 14-21-42 230 0.161 0.124 33 11-17-25 180 0.156 0.144 35 18-27-48 265 0.142 0.117 34 13-19-27 315 0.130 0.117 34 15-20-29 140 0.180 0.145 36 14-21-42 220 0.301 0.214 36 11-16-24 170 0.165 0.145 36 17-26-46 280 0.238 0.184 38 13-19-27 220 0.233 0.215 40 22-34-53 320 0.208 0.171 38 15-21-29 380 0.189 0.170 38 18-23-32 Performance notes appear at end of performance data PERFORMANCE DATA 8" Inlet Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw F43 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ML-39-SP / 1" SLOT SPACING WIDTH / THREE-SLOT / SUPPLY WITH MP-39-SP PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. F 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 40 0.012 0.009 1-2-6 70 0.028 0.019 1-2-7 50 0.019 0.017 1-3-10 80 0.017 0.012 1-2-9 60 0.011 0.010 2-4-15 90 0.013 0.010 1-3-11 100 0.009 0.008 2-4-12 70 0.037 0.028 20 2-5-18 108 0.065 0.045 19 2-4-13 80 0.048 0.044 19 3-6-21 135 0.047 0.035 21 3-7-17 100 0.031 0.028 22 4-10-26 148 0.036 0.028 20 3-8-18 165 0.025 0.021 19 4-10-21 100 0.076 0.058 28 4-10-26 145 0.119 0.081 26 3-8-18 110 0.091 0.083 26 5-12-29 190 0.094 0.069 29 6-12-23 140 0.061 0.054 29 9-18-37 205 0.069 0.053 28 7-13-23 230 0.049 0.042 26 8-14-25 130 0.128 0.097 34 8-17-34 183 0.188 0.128 32 5-11-22 140 0.148 0.134 32 9-18-37 245 0.156 0.115 35 10-15-26 180 0.101 0.090 35 15-24-48 263 0.113 0.088 34 11-16-26 295 0.080 0.068 32 12-18-28 160 0.193 0.148 39 12-21-42 220 0.273 0.186 36 8-14-24 170 0.218 0.198 37 13-22-45 300 0.234 0.172 40 12-19-28 220 0.151 0.134 40 19-29-53 320 0.167 0.130 38 13-20-29 360 0.119 0.102 37 15-22-31 190 0.273 0.208 43 16-25-49 258 0.374 0.255 40 11-16-26 200 0.302 0.274 41 18-26-50 355 0.328 0.241 44 15-22-31 260 0.211 0.187 44 23-34-57 378 0.233 0.181 42 16-22-32 425 0.166 0.142 41 18-24-34 220 0.365 0.279 47 19-29-53 295 0.491 0.335 43 12-18-28 230 0.399 0.363 44 20-30-54 410 0.437 0.321 47 17-23-33 300 0.281 0.249 48 26-40-62 435 0.309 0.241 46 18-24-34 490 0.221 0.189 44 20-26-36 130 0.260 0.230 35 14-21-41 150 0.283 0.243 27 7-11-20 170 0.220 0.200 37 18-27-46 210 0.242 0.212 31 11-16-24 210 0.226 0.210 39 14-17-24 290 0.275 0.244 36 15-20-28 360 0.210 0.192 37 18-22-31 153 0.358 0.317 38 16-25-44 170 0.364 0.312 30 8-13-21 200 0.304 0.277 41 22-32-50 248 0.337 0.294 35 13-18-26 248 0.313 0.291 43 15-18-26 340 0.378 0.336 40 17-21-30 425 0.292 0.268 41 19-24-34 175 0.472 0.417 42 19-28-47 190 0.455 0.390 33 10-14-23 230 0.402 0.366 44 25-37-54 285 0.446 0.390 39 14-19-28 285 0.416 0.386 46 16-19-28 390 0.497 0.442 43 19-23-32 490 0.389 0.356 44 21-26-36 ML-37-SP / ½" SLOT SPACING WIDTH / FOUR-SLOT / SUPPLY WITH MP-37-SP PLENUM 2 ft. 6" Inlet 4 ft. PERFORMANCE DATA 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet F44 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 40 0.025 0.022 1-3-12 70 0.062 0.053 1-3-11 50 0.019 0.017 2-5-16 60 0.020 0.017 1-2-9 60 0.018 0.017 3-6-13 90 0.026 0.024 2-5-14 100 0.016 0.015 3-7-15 63 0.060 0.053 17 3-7-20 90 0.102 0.088 15 2-5-14 80 0.049 0.044 19 5-12-26 98 0.052 0.046 13 3-6-15 98 0.049 0.045 21 7-11-16 140 0.064 0.057 19 6-11-19 165 0.044 0.040 19 8-13-21 85 0.111 0.098 24 6-13-27 110 0.152 0.131 20 4-8-17 110 0.092 0.084 27 10-18-36 135 0.100 0.088 21 5-10-19 135 0.093 0.087 29 10-13-19 190 0.118 0.105 26 10-14-23 230 0.086 0.079 27 12-18-25 108 0.178 0.157 30 10-17-35 130 0.213 0.183 24 5-10-19 140 0.149 0.136 32 15-23-42 173 0.164 0.143 27 9-13-21 173 0.152 0.141 35 12-15-21 240 0.188 0.167 32 12-18-25 295 0.141 0.129 32 15-20-28 Performance notes appear at end of performance data diffusers PERFORMANCE DATA 2 ft. 6" Inlet 4 ft. 2 ft. 8" Inlet 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw 50 0.019 0.014 1-3-10 90 0.046 0.031 1-3-11 70 0.020 0.017 2-5-18 100 0.026 0.019 2-4-12 70 0.015 0.014 2-5-12 120 0.024 0.018 2-5-15 130 0.016 0.013 3-6-16 80 0.048 0.037 18 3-6-21 123 0.085 0.058 18 2-5-15 105 0.046 0.038 21 5-11-28 155 0.062 0.046 19 4-9-19 110 0.038 0.033 19 5-10-17 185 0.056 0.044 21 5-12-22 210 0.041 0.035 20 7-13-24 110 0.091 0.070 26 5-12-29 155 0.135 0.093 23 4-9-19 140 0.082 0.068 27 9-18-37 210 0.115 0.084 26 7-13-24 150 0.070 0.062 26 9-13-20 250 0.102 0.079 28 10-16-26 290 0.077 0.066 27 12-18-28 140 0.148 0.113 31 9-18-37 188 0.198 0.135 28 6-12-22 175 0.127 0.106 33 14-23-46 265 0.183 0.134 32 11-16-27 190 0.113 0.100 32 11-16-23 315 0.162 0.126 33 13-20-29 370 0.126 0.107 33 15-22-31 170 0.218 0.167 36 13-22-45 220 0.273 0.186 31 8-14-24 210 0.183 0.153 37 18-28-52 320 0.266 0.196 36 13-20-29 230 0.165 0.146 36 13-18-25 380 0.236 0.184 38 16-23-32 450 0.186 0.159 38 19-25-35 200 0.302 0.231 40 18-26-50 253 0.359 0.245 35 10-16-26 245 0.250 0.208 41 22-32-56 375 0.366 0.269 40 16-22-32 270 0.228 0.201 40 15-19-27 445 0.324 0.252 41 18-24-34 530 0.258 0.221 41 22-27-38 230 0.399 0.305 43 20-30-54 285 0.458 0.313 38 12-18-28 280 0.326 0.272 44 25-37-60 430 0.481 0.353 43 18-24-34 310 0.300 0.265 43 17-20-29 510 0.425 0.331 45 21-26-37 610 0.342 0.292 45 23-29-40 190 0.236 0.171 39 11-22-43 250 0.328 0.216 35 6-13-26 200 0.261 0.233 36 12-23-46 330 0.252 0.177 37 11-18-30 250 0.141 0.119 39 18-29-56 350 0.170 0.126 36 13-19-31 460 0.149 0.121 39 17-25-35 225 0.330 0.240 43 15-26-51 290 0.441 0.290 38 9-16-28 235 0.360 0.322 40 16-27-54 390 0.351 0.247 41 14-21-32 295 0.197 0.165 43 22-34-61 415 0.239 0.177 40 15-22-33 545 0.209 0.169 43 20-27-38 260 0.441 0.320 46 20-30-57 330 0.571 0.376 41 11-18-30 270 0.476 0.425 43 21-31-59 450 0.468 0.328 45 16-24-35 340 0.261 0.219 46 26-39-66 480 0.320 0.237 44 17-25-36 630 0.280 0.226 46 23-29-41 Redefine your comfort zone. ™ | www.titus-hvac.com ML-38-SP, -TZ / ¾" SLOT SPACING WIDTH / FOUR-SLOT / SUPPLY WITH MP-38-SP PLENUM F ML-39-SP / 1" SLOT SPACING WIDTH / FOUR-SLOT / SUPPLY WITH MP-39-SP PLENUM 2 ft. 6" Inlet 4 ft. 2 ft. 4 ft. 2 ft. 10" Inlet 4 ft. 12" Inlet 4 ft. 50 0.016 0.012 1-2-7 90 0.042 0.028 1-2-8 60 0.023 0.021 1-2-9 90 0.019 0.013 1-2-8 70 0.011 0.009 1-3-13 90 0.011 0.008 1-2-8 120 0.010 0.008 1-3-13 85 0.047 0.034 20 2-5-19 130 0.089 0.058 19 2-4-14 95 0.059 0.053 19 3-6-22 150 0.052 0.036 19 2-5-16 115 0.030 0.025 20 4-9-26 155 0.033 0.025 17 2-6-17 205 0.030 0.024 19 4-10-22 120 0.094 0.068 28 4-9-27 170 0.151 0.100 26 3-7-18 130 0.110 0.099 26 5-11-30 210 0.102 0.072 27 5-10-23 160 0.058 0.049 28 7-17-37 220 0.067 0.050 25 5-11-24 290 0.059 0.048 28 9-16-28 155 0.157 0.114 34 7-16-35 210 0.231 0.152 31 5-10-23 165 0.178 0.159 32 8-18-38 270 0.168 0.118 33 8-15-27 205 0.095 0.080 34 12-23-47 285 0.113 0.083 31 8-15-28 375 0.099 0.080 34 13-20-32 Performance notes appear at end of performance data PERFORMANCE DATA 8" Inlet Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure Static Pressure NC (Noise Criteria) Throw F45 Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F MODULINEAR DIFFUSER PLENUMS Available Models: MP-37 MP-38 MP-39 MP-40 MPI-37 MPI-38 MPI-39 MPI-40 PERFORMANCE DATA • NC values were determined from octave band 2 thru 7 sound power levels with a 10 dB room absorption • Pressures are in inches WG • Throw values are listed for terminal velocities of 150, 100 and 50 fpm under isothermal conditions. For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog. • Throw values listed are for the one-way air pattern. For divided airflow, select the airflow in each direction according to the number of sides aimed in that direction, with the total airflow apportioned between slots. • Data is valid only for Titus ML linear diffusers with Titus supplied MP plenums • Data was obtained from testing in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance with flexible duct inlet may vary in the field. See the Engineering Guidelines section for additional information. SPECIAL PERFORMANCE Available Models: MP-37-SP MP-38-SP MP-39-SP MP-40-SP MPI-37-SP MPI-38-SP MPI-39-SP MPI-40-SP • Data is valid only for Titus ML linear diffusers with Titus supplied MP-SP plenums • Pressures are in inches WG • Data was obtained from testing in accordance with ANSI/ASHRAE Standard 70-2006. Actual performance with flexible duct inlet, may vary in the field. See the Engineering Guidelines section for additional information. F46 F46 diffusers • NC values were determined from octave band 2 thru 7 sound power levels with a 10 dB room absorption • Spread can be determined by multiplying the throw by 0.5 • Throw values are listed for terminal velocities of 150, 100 and 50 fpm under isothermal conditions. For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog. • Throw values listed are for the one-way air pattern. For divided airflow, select the airflow in each direction according to the number of sides aimed in that direction, with the total airflow apportioned between slots. diffusers Linear Slot Ceiling Diffusers (continued) • Nominal diffuser lengths are 2 and 4 feet • Diffuser material - extruded aluminum • Plenum - steel MLT See website for Specifications AVAILABLE MODELS: Supply Models: MLT-37 / ½” Slot MLT-38 / ¾” Slot MLT-39 / 1” Slot MLT-40 / 1½” Slot MLTI-37 / ½” Slot MLTI-38 / ¾” Slot MLTI-39 / 1” Slot MLTI-40 / 1½” Slot Return Models: MLTR-37 / ½” Slot MLTR-38 / ¾” Slot MLTR-39 / 1” Slot MLTR-40 / 1½” Slot MLTRI-37 / ½” Slot MLTRI-38 / ¾” Slot MLTRI-39 / 1” Slot MLTRI-40 / 1½” Slot Redefine your comfort zone. ™ | www.titus-hvac.com MLT F FINISH Standard Finish - #26 White border OVERVIEW Modulinear / Lay-in The Titus MLT supply diffuser is specifically designed for standard and narrow tee lay-in applications. The MLT is a supply diffuser and plenum, available in 24 and 48 inch nominal lengths and 1 through 4 slots. The plenums are available in nominal oval inlet sizes of 6 thought 12 inches. The MLT features the unique “ice tong” deflector blades that allow both changes in air volume and direction from the face of the diffuser. MLT F47 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS MLT UNIT DIMENSIONS MLT SUPPLY MLTR RETURN S S S S BORDER 1B BORDER 1B INSULATION OPTIONAL A NOM. MODULE LENGTH F 1/2" B Standard Inlet Size 1 1/8" 6 Oval 8 Oval 10 Oval 12 Oval 11 7/8 A A L W S SECTION A-A MLT Model S Slot Width MLT, MLTI-37 MLT, MLTI-38 MLT, MLTI-39 ½ ¾ 1 MLT, MLTI-40 1½ W Width Slots 1 2 3 4 17⁄8 21⁄8 23⁄8 27⁄8 37⁄8 35⁄8 41⁄8 51⁄8 43⁄8 51⁄8 57⁄8 73⁄8 55⁄8 65⁄8 75⁄8 95⁄8 Nominal Module Length 24, 48 Available Inlets (inches) Oval Plenum Length (inches) Standard 6, 8, 10, 12 21¾, 45¾ L Unit Length (inches) Standard 23¾, 47¾ BORDER NT BORDER NT D = DUCT LENGTH N MINUS 1 7/16" DIMENSIONS 5/16" N MINUS 5/8" N MINUS 1/4" N D = DUCT SIZE HANGER 3 1/8" 1 13/16" F48 F48 S 3/16" 3/4" O=D- 1/16" 7/16 5/16" 7/16 SIDE RAIL FUNCTIONS AS LIGHT SHIELD. DIFFUSER IS SUPPORTED BE END CAPS. Dimensions A B Width Height 6¼ 5¼ 93⁄8 5¼ 12½ 5¼ 141⁄8 77⁄8 diffusers Linear Bar Diffusers Redefine your comfort zone. ™ | www.titus-hvac.com CT • When both appearance and performance are of prime importance in an air distribution system, Titus linear bar diffusers are a logical choice • Designed for both heating and cooling applications, supply as well as return • Available in eight different core styles plus a wide selection of frames and borders • Can be selected for ceiling, side wall, or sill installations. Heavy duty models (Frames 5 and 6) are designed especially for typical floor installations. CT-480 CT-580 • Accessories such as directional blades, dampers, blank-offs, access doors and mitered corners make these diffusers even more versatile • Ideal for continuous length applications. Multiple sections are shipped with required alignment strips or pins for field installation. metric sizes ½” Spacing CT-580 / 1/8” Bars / 0B Deflection CT-581 / 1/8” Bars / 15B Deflection CT-540 / ¼” Bars / 0B Deflection CT-541 / ¼” Bars / 15B Deflection /16” Spacing CT-PP-0 / 7/32” Bars / 0B Deflection CT-PP-3 / 7/32” Bars / 30B Deflection MRI compatible See website for Specifications AVAILABLE MODELS: ¼” Spacing CT-480 / 1/8” Bars / 0B Deflection CT-481 / 1/8” Bars / 15B Deflection woodgrains F ADDITIONAL FEATURES • Maximum one piece section is 6 feet. Lengths greater than 6 feet are furnished in multiple sections. • Sections can be joined together end-to-end for continuous appearance, using standard alignment strips or alignment wires • All deflection bars are fixed and parallel to the long dimension • Fixed bars and support bars are extruded aluminum • Optional curving to a 2' feet (24" minimum radius) on most models, available for architectural enhancement 7 FINISHES Standard Finish - #26 White Optional Finishes - #01 Aluminum / #04 Mill / #25 Off White / #84 Black Anodized finishes available OVERVIEW Fixed Bars / Pencil Proof-Aluminum When both appearance and performance are of prime importance in an air distribution system, Titus linear bar diffusers are a logical choice. Designed for both heating and cooling applications, supply as well as return. CT F49 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS F BORDERS & FRAMES - CORE COMBINATIONS Core with Border Core with Border & Frame Type 13 border is shown. For other available types, please see F49. Type 1A frame & border combination is shown. For other available types, please see F50. Core Only Core with Heavy Duty Mounting Frame for Floor Applications Model CT-540 core is shown. For other available models, please see below. Type 5 heavy duty mounting frame is shown. For other available types, please see F50. AVAILABLE CORES ½” Spacing ¼” Spacing /8” Bars Model CT-480 - 0° Deflection ¼" /8” Bars ¼” Bars Model CT-580 - 0° Deflection Model CT-540 - 0° Deflection 1 1 Duct Size minus ¾" ½" Duct Size minus ¾" ⅛" ⅛" Support Bar Model CT-581 - 15° Deflection Model CT-481 - 15° Deflection Model CT-541 - 15° Deflection Duct Size minus ¾" Duct Size minus ¾" Duct Size minus ¾" ⅛" 1 ½" /4" ½" ¼" 15/32" 15/32" 15/32" Support Bar Support Bar Support Bar DIMENSIONS 15/32" Support Bar Support Bar See Note Pencil Proof Model CT-PP-0 - 0° Deflection Model CT-PP-3 - 30° Deflection Duct Size minus ¾" 7/16" Duct Size minus ¾" 7 7/32" /32" 7/16" 15/32" 15/32" Support Bar Support Bar See Note F50 F50 1/4" 15/32" 15/32" ⅛" Duct Size minus ¾" ½" Note: Not recommended for floor applications with heavy loads or high traffic. See page F53 for maximum floor loading. All dimensions are in inches diffusers DIMENSIONS O = D plus 2" 1" Frame & Border Type 1B with • 1¼” Border Frame & Border Type 2 with • ¾” Border O = D plus 2½" 1¼" D minus ¾" D minus ¾" 3 O = D plus 1¼" D minus ¾" ¾" /16" ⅜" ⅜" 1⅝" 19/16" 1" 1⅛" D = Duct Size Frame & Border Type 3 with • ½” Border • Spring Latch 7 O = D plus /16" D minus ¾" ½" Frame & Border Type 4 with • ¼” Border • Spring Latch ¾" 7/16" Border Type 22 Tape & Spackle 5/8" 1 5/8 O=D ¼" D = Duct Size ⅝" D = Duct Size 1¼" Duct - 3/4 D minus ¾" ¾" 9 1 /16" 2 5/8 9 1 /16" D = Duct Size D = Duct Size 3/16" Redefine your comfort zone. ™ | www.titus-hvac.com Frame & Border Type 1A with • 1” Border F D = Duct Size BORDER TYPES Border Type 7 with • ¼” Border O = D minus ¼" ¼" Border Type 11 & 12 • (11) ½” Border • (12) ¾” Border D minus ¾" 3 O = 2B plus D minus ¾" O = 2B plus D minus ¾" /16" B 3/16" 1¼" Border Type 13 & 14 with • (13) 1” Border • (14) 1¼” Border 3/16" D minus ¾" 1¼" B D minus ¾" 1¼" D = Duct Size D = Duct Size D = Duct Size HEAVY DUTY MOUNTING FRAMES FOR FLOOR APPLICATIONS (see loading limitations Submittal D-CT-HD) 1/8" Frame Type 6 • No Flange 1" D minus 3/8" 3/16" 1 7/8" 1 3/16" 1/8" 1 7/8" 1/16" D = Duct Size 1 5/16" 1/16" D=O D minus 3/8" DIMENSIONS Frame Type 5 • 1” Flange F51 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS Border Types (Type 11 Shown) Core C C F D F D O Type F O Border Length Overall Length 5 6 7 11 12 13 14 22 D D D minus 5/8 D minus 5/8 D minus 5/8 D minus 5/8 D minus 5/8 D minus 5/8 D plus 1 /8 D D minus ¼ D plus ¼ D plus ¾ D plus 1¼ D plus 1¾ D plus 21/2 5 O C Core Opening Length D minus 3/8 D minus 3/8 D minus ¾ D minus ¾ D minus ¾ D minus ¾ D minus ¾ D minus ¾ Number of Bars CT-480, 481 per Width ¼” spacing 2” 2 ½” 3” 3 ½” 4” 5” 6” CT-540, 541, CT-580, 581 ½” spacing CT-PPO, CT-PP3 7 /16” spacing 2 3 4 5 6 8 10 2 3 4 5 7 9 11 3 5 7 9 11 15 19 F O Type Frame Length Overall Length 1A 1B 2 3 4 D D D D D D plus 2 D plus 2 ½ D plus 1 ¼ D plus 7/16 D C Core Opening Length D minus ¾ D minus ¾ D minus ¾ D minus ¾ D minus ¾ MAXIMUM FLOOR LOADING STANDARD CORE WIDTH INFORMATION Border 1A, 1B, 2, 3, 4, 7, 11, 12, 13, 14 F Frame & Border Type (Type 1A & 1B Shown) Core (Frames 5 and 6 with standard support bars on 6” centers) Border 5 and 6 CT-480, 481 CT-540, 541, ¼” CT-580, 581 spacing ½” spacing 6 8 10 12 14 18 22 CT-PPO, CT-PP3 7 /16” spacing 3 4 4 6 7 9 11 3 4 5 7 8 10 12 Max. Vertical Distributed Load (lbs./in.2) 300 200 250 250 Model CT-480/CT-481 CT-580/CT-581 CT-540/CT-541 CT-PP-0/CT-PP-3 Max. Vertical Live Load (lbs./ft.2) 300 200 250 250 Max. Horizontal Load (lbs.) 50 50 50 50 Note: If placing furniture on cores, furniture legs should be a minimum of core spacing plus two bars wide to avoid placing a horizontal load on cores. Maximum duct width available is 12”. CORE ONLY OPTION ALIGNMENT STRIPS 5 17 /8" /32" S D S = 9” maximum support bar spacing D = 72” maximum for one piece Core Only is an option available for field framing Standard widths are as shown See page F51 for core details. Core will ship ¾” smaller than the duct width. Used with border width ½” or wider. Alignment pins used with ¼” borders. AVAILABLE FASTENINGS Type A • Screw Holes Type B • Spring Clip DIMENSIONS For ceiling, side wall, sill, or floor. Used with Frame & Border Types 1B, 5, 11, 12, 13, 14. ADDITIONAL REINFORCING (Optional) (Except frame types 5 and 6) For sill installations. Used with Frame & Border Types 11, 12, 13, 14. Must use AG-35B Damper instead of AG-35. Duct For ceiling, side wall, or sill. Used with Frame and Border Types 1A, 1B, 2, 3, 4, 7, 11, 12, 13, 14, & Border Type 22 Type CC-Core Clip Option Type H - Optional Heavy Duty Core (Note) CORE CLIP 6" Max. F52 F52 Type C • Concealed Fastening 6" Max. Optional Heavy Duty Core has support bars on 6” maximum centers. (Standard core has 9” maximum centers.) See maximum floor loading shown above. Note: Frame types 5 and 6 have support bars on 6" centers as standard. CC - CORE CLIP OPTION AVAILABLE ON FRAME 5 & 6 ONLY CORE CLIP SUPPORT FACE All dimensions are in inches Notes: • Used without spring latch in Frame & Border Types 3 and 4. • Not for use with Cores CT-480 and CT-481 (¼” bar spacing). Screwdriver will not fit between bars. diffusers ACCESSORIES Model 07 Directional Blades Model AG-35 Opposed Blade Damper 1¼" *3" 27/16" For Model CT diffuser widths 2” through 4”. Friction hinge on 2” widths. Screwdriver operator on 2½” through 4”. Cannot be attached to Frame and Border Types 3, 4, 5, or 6. For those types use Model AG-35B damper on diffusers 3” and wider. For all widths of Model CT diffusers 3” or greater. Cannot be attached to Frame and Border Types 3 and 4. Can be used with Type 5 or 6 if Type B Spring Clip Fastening is omitted. For Model CT diffusers 3” and wider. Not recommended for Models CT-480 and CT-481. Cannot be attached to Frame and Border Types 3 and 4. Use Model AG-35B damper for those types. Note: Minimum duct width is 3” *For floor models, dimension is 4” Model AD Access Door (Not available on Types 3, 4, 5, 6, and 22; and not available when damper is required) Model BLKS Steel Blank-Off Note: Maximum Length is 6 feet. 11/16" 6" BLKS For all widths of Model CT diffusers. Furnished in 6’ lengths for field cutting and installation. Steel, painted flat black. L2 L1 L3 R3 R1 X R2 X MITERED CORNERS Specify Dimension X O D D' Outside D' D' D O D=O Inside D=O D=O Type C / Side Wall, Inside D=O ACCESSORIES Floor, Ceiling, or Sill Type O / 0° Deflection Type A / Deflection Inside Type B / Deflection Outside Type D / Side Wall, Outside OVERALL DIMENSION O FOR VARIOUS FRAME AND BORDER TYPES Duct Length D 1A 1B 12 12 15/16 13 3/16 18 18 15/16 19 3/16 24 24 15/16 24 3/16 F Available Pencil Proof Models: MC-PP-0 / 7/16” Spacing / 7/32” Bars / 0° Deflection MC-PP-3 / 7/16” Spacing / 7/32” Bars / 30° Deflection Available Models: MC-480 / ¼” Spacing / 1/8” Bars / 0° Deflection MC-481 / ¼” Spacing / 1/8” Bars / 15° Deflection MC-580 / ½” Spacing / 1/8 ” Bars / 0° Deflection MC-581 / ½” Spacing / 1/8” Bars / 15° Deflection MC-540 / ½” Spacing / ¼” Bars / 0° Deflection MC-541 / ½” Spacing / ¼” Bars / 15° Deflection Duct Width D’ 2-4 4½-10 10½-12 Redefine your comfort zone. ™ | www.titus-hvac.com Model AG-30 Single Blade Damper 2 12 5/8 18 5/8 24 5/8 3 12 3/16 18 3/16 24 3/16 Frame & Border Type 4 5 6 7 12 12 13/16 12 11 7/8 18 18 13/16 18 17 7/8 13 24 24 /16 24 23 7/8 All dimensions are in inches 11 12 1/8 18 1/8 24 1/8 12 12 3/8 18 3/8 24 3/8 13 12 5/8 18 5/8 24 5/8 14 12 7/8 18 7/8 24 7/8 CO 12 18 24 F53 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com INSTALLATIONS A1 Side Wall A2 Side Wall A3 Side Wall Finished Plaster Finished Wood Paneling Duct by Others Finished Plaster Duct by Others Duct by Others Border Type 11, 12, 13 or 14 Frame & Border Type 3 with Concealed Fastening Frame & Border Type 4 with Concealed Fastening B1 Raised Sill B2 Raised Sill B3 Raised Sill Not for Floor Installations Not for Floor Installations Not for Floor Installations Marble Sill or Curb Finished Sill Marble, Terrazzo, Concrete, Vinyl Tile, Etc. F Metal Enclosure by Others Core Support by Others Angle by Others Duct by Others Duct by Others Border Type 11, 12, 13 or 14 Frame & Border Type 3 Core Only C1 Floor or Sill C2 Floor or Sill D1 Ceiling Finished Floor, Sill, or Curb Duct by Others Finished Floor, Sill, or Curb Plaster Stop by Others See Submittal CT-HD for maximum loading. See Submittal CT-HD for maximum loading. INSTALLATIONS Duct by Others Finished Plaster Ceiling Frame Type 6 plus Heavy Duty Core Frame Type 5 plus Heavy Duty Core Border Type 11, 12, 13 or 14 D2 Ceiling D3 Ceiling D4 Ceiling Duct by Others Duct by Others Finished Plaster Ceiling Frame and Border Type 3 with Concealed Fastening F54 F54 Duct by Others Acoustical Tile or Acoustical Metal Pan Ceiling Frame and Border Type 2 Frame Type 15 plus Heavy Duty Core diffusers PERFORMANCE DATA Effective Area, Square Feet Nominal Duct Width, Inches 0.048 2 0.066 2½ 0.084 3 0.103 3½ 0.121 4 0.157 5 0.194 6 Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall 0.011 19 3-5-10 0.011 26 3-6-12 0.01 33 3-7-13 0.011 41 4-8-15 0.011 49 4-8-17 0.011 63 5-9-19 0.011 78 6-10-21 0.024 28 5-8-15 0.024 39 6-9-18 0.024 50 7-10-20 0.024 61 8-11-22 0.024 73 8-12-25 0.024 94 9-14-28 0.024 116 10-16-31 0.042 37 7-10-18 0.043 52 8-12-21 0.041 66 9-13-23 0.043 82 11 10-15-26 0.044 98 12 11-17-28 0.042 125 12 12-19-32 0.042 155 13 14-21-36 0.068 47 14 8-13-20 0.066 65 15 10-15-23 0.066 83 16 11-17-26 0.066 102 17 13-19-29 0.068 122 18 14-21-32 0.066 157 19 16-23-36 0.066 194 20 17-26-40 0.097 56 19 10-15/-22 0.096 78 20 12-18-25 0.095 100 21 14-20-29 0.095 122 22 15-22-32 0.097 146 23 17-25-35 0.094 188 24 19-28-39 0.095 233 25 21-31-44 0.134 66 24 12-17-23 0.13 91 25 14-19-27 0.128 116 26 16-22-31 0.13 143 27 18-24-34 0.133 171 28 19-27-38 0.129 220 29 22-30-43 0.129 272 30 24-34-47 0.173 75 27 14-18-25 0.17 104 29 16-21-29 0.168 133 30 18-23-33 0.169 163 30 20-26-37 0.173 195 32 22-28-40 0.168 251 32 25-32-46 0.168 310 33 28-36-51 0.217 84 31 15-19-26 0.215 117 32 18-22-31 0.211 149 33 20-25-35 0.216 184 34 23-28-39 0.221 220 35 25-30-43 0.212 282 36 28-34-48 0.213 349 37 31-38-54 0.272 94 34 16-20-28 0.266 130 35 19-23-33 0.262 166 36 21-26-37 0.265 204 37 24-29-41 0.271 244 38 26-32-45 0.263 314 39 29-36-51 0.263 388 40 33-40-57 0.068 47 21 8-13-20 0.066 65 22 10-15-23 0.065 83 23 11-17-26 0.066 102 24 13-19-29 0.067 122 25 14-21-32 0.065 157 25 16-24-36 0.065 194 26 18-27-40 0.096 56 26 10-15-22 0.095 78 27 12-18-25 0.095 100 28 14-20-29 0.094 122 29 15-22-32 0.097 146 30 17-25-35 0.094 188 30 19-28-39 0.094 233 31 21-31-44 0.133 66 31 12-17-23 0.129 91 31 14-19-27 0.127 116 32 16-22-31 0.129 143 33 18-24-34 0.132 171 34 20-27-38 0.128 220 35 22-30-43 0.128 272 36 25-34-47 0.172 75 34 13-18-25 0.169 104 35 16-21-29 0.167 133 36 18-23-33 0.168 163 37 20-26-37 0.172 195 38 22-28-40 0.167 251 39 25-32-46 0.167 310 39 28-36-51 0.216 84 38 15-19-26 0.214 117 39 18-22-31 0.21 149 39 20-25-35 0.214 184 40 23-28-39 0.219 220 41 25-30-43 0.211 282 42 28-34-48 0.211 349 43 31-38-54 0.271 94 41 16-20-28 0.264 130 42 19-23-33 0.26 166 42 21-26-37 0.263 204 43 24-29-41 0.27 244 44 26-32-45 0.261 314 45 29-36-51 0.261 388 46 33-40-57 Redefine your comfort zone. ™ | www.titus-hvac.com CT-480 / 1⁄8" THICK BARS / 0° DEFLECTION / ¼" SPACING WIDTH F CT-481 / 1⁄8" THICK BARS / 15° DEFLECTION / ¼" SPACING WIDTH Nominal Duct Width, Inches 0.049 2 0.066 2½ 0.083 3 0.100 3½ 0.117 4 0.151 5 0.186 6 Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall 0.011 19 3-5-10 0.011 26 3-6-12 0.01 33 4-7-14 0.011 41 4-8-15 0.011 49 5-8-17 0.011 63 5-10-19 0.011 78 6-11-21 0.024 28 5-7-15 0.024 39 6-9-18 0.024 50 7-10-20 0.024 61 8-11-22 0.024 73 8-13-25 0.023 94 10-14-28 0.023 116 11 11-16-31 0.042 37 14 7-10-18 0.042 52 16 8-12-21 0.041 66 16 9-14-23 0.043 82 17 10-15-26 0.044 98 18 11-17-28 0.041 125 19 13-19-32 0.042 155 20 14-21-36 Performance notes appear at end of performance data PERFORMANCE DATA Effective Area, Square Feet F55 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F CT-580 / 1⁄8" THICK BARS / 0° DEFLECTION / ½" SPACING WIDTH Effective Area, Square Feet Nominal Duct Width, Inches 0.055 2 0.076 2½ 0.096 3 0.117 3½ 0.138 4 0.179 5 0.221 6 Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall 0.009 22 3-6-11 0.009 30 3-6-3 0.009 38 4-7-14 0.008 46 4-8-16 0.009 56 5-9-18 0.009 72 5-10-20 0.008 88 6-11-22 0.021 33 6-8-17 0.019 44 6-9-19 0.02 58 7-11-22 0.019 69 8-12-4 0.02 83 9-13-26 0.019 107 10-15-30 0.019 133 11-17-33 0.037 44 7-11-19 0.033 58 8-12-22 0.036 78 10-15-25 0.034 92 11-16-28 0.035 110 12-18-30 0.034 142 13-20-34 0.035 178 11 15-22-38 0.058 55 12 9-14-21 0.051 72 12 10-15-24 0.057 98 14 12-19-28 0.053 115 14 13-20-31 0.054 137 15 15-22-34 0.052 177 16 16-25-38 0.054 223 17 19-28-43 0.084 66 17 11-17-23 0.073 86 17 12-18-27 0.083 118 19 15-22-31 0.076 138 19 16-24-34 0.077 164 20 17-26-37 0.075 212 21 20-30-42 0.079 268 22 22-33-47 0.114 77 21 13-18-25 0.098 100 21 14-20-29 0.113 138 24 18-24-34 0.103 161 23 19-26-37 0.104 191 24 20-28-40 0.102 247 25 23-32-45 0.107 313 27 26-36-51 0.149 88 25 15-19-27 0.128 114 24 16-22-31 0.149 158 27 20-26-36 0.135 184 27 21-28-39 0.136 218 28 23-30-42 0.133 282 29 26-34-48 0.14 358 30 30-39-54 0.189 99 28 17-20-29 0.161 128 28 18-23-33 0.189 178 31 22-27-38 0.171 207 30 24-29-41 0.171 245 31 26-32-45 0.168 317 32 30-36-51 0.178 403 34 33-41-58 0.234 110 31 17-21-30 0.199 142 30 20-24-34 0.234 198 34 23-29-40 0.211 230 33 25-31-44 0.211 272 34 27-34-47 0.207 352 35 31-38-54 0.22 448 37 35-43-61 0.058 55 19 9-14-21 0.055 75 20 11-16-25 0.054 95 20 12-18-28 0.052 114 21 13-20-31 0.051 134 21 14-22-33 0.05 174 22 16-25-38 0.049 211 23 18-27-42 0.084 66 24 11-17-23 0.08 90 25 13-19-27 0.077 114 26 15-22-31 0.075 137 26 16-24-34 0.074 161 27 17-26-37 0.073 209 28 20-29-42 0.07 253 28 21-32-46 0.114 77 29 13-18-25 0.108 105 30 15-21-29 0.105 133 30 17-23-33 0.102 160 31 19-26-36 0.101 188 31 20-28-39 0.099 244 32 23-32-45 0.095 295 33 25-35-49 0.149 88 33 15-19-27 0.142 120 34 17-22-32 0.137 152 34 19-25-35 0.133 183 35 21-28-39 0.132 215 35 23-30-42 0.13 279 36 26-34-48 0.124 337 37 29-37-53 0.189 99 36 17-20-29 0.179 135 37 19-24-33 0.174 171 38 22-27-38 0.169 206 38 24-29-41 0.167 242 39 26-32-45 0.164 314 40 29-36-51 0.157 379 40 32-40-56 0.233 110 40 17-21-30 0.221 150 40 20-25-35 0.215 190 41 23-28-40 0.209 229 41 25-31-44 0.206 269 42 27-33-47 0.203 349 43 31-38-54 0.194 421 43 34-42-59 PERFORMANCE DATA CT-581 / 1⁄8" THICK BARS / 15° DEFLECTION / ½" SPACING WIDTH F56 F56 Effective Area, Square Feet Nominal Duct Width, Inches 0.055 2 0.075 2½ 0.096 3 0.116 3½ 0.136 4 0.176 5 0.216 6 Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall 0.009 22 3-6-11 0.009 30 3-6-13 0.009 38 4-7-15 0.008 45 4-8-16 0.008 53 4-9-17 0.008 69 5-10-19 0.008 85 6-11-22 0.021 33 6-8-17 0.02 45 6-10-19 0.019 57 7-11-22 0.018 68 8-12-4 0.018 80 9-13-26 0.018 104 10-15-29 0.018 127 11-16-32 0.037 44 12 7-11-19 0.035 60 13 9-13-22 0.034 76 14 10-15-25 0.033 91 14 11-16-27 0.033 107 14 11-17-30 0.032 139 15 13-20-34 0.031 169 16 14-22-37 Performance notes appear at end of performance data diffusers PERFORMANCE DATA Effective Area, Square Feet Nominal Duct Width, Inches 0.053 2 0.075 2½ 0.097 3 0.119 3½ 0.141 4 0.185 5 0.228 6 Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall 0.009 19 2-5-10 0.009 26 3-6-11 0.009 33 3-6-13 0.009 41 3-7-14 0.009 49 4-8-15 0.009 63 4-9-17 0.009 78 4-10-19 0.02 28 5-7-14 0.02 39 6-8-17 0.02 50 6-10-19 0.02 61 7-10-21 0.021 73 8-12-23 0.02 94 9-13-26 0.02 116 10-14-29 0.036 37 6-10-18 0.036 52 7-11-21 0.035 66 8-13-23 0.036 82 11 9-14-26 0.037 98 12 10-15-28 0.035 125 13 11-17-32 0.035 155 14 13-19-36 0.058 47 14 8-12-20 0.056 65 15 9-14-23 0.055 83 16 11-16-26 0.056 102 18 12-18-29 0.057 122 19 13-19-32 0.056 157 19 14-22-36 0.056 194 20 16-24-40 0.082 56 19 10-14-22 0.081 78 21 11-17-25 0.08 100 22 13-19-29 0.08 122 23 14-21-32 0.082 146 24 15-23-35 0.08 188 25 17-26-39 0.08 233 26 19-29-44 0.113 66 24 11-17-23 0.11 91 25 13-19-27 0.108 116 26 15-22-31 0.11 143 27 16-24-34 0.113 171 28 18-27-38 0.109 220 29 20-30-43 0.109 272 30 22-34-47 0.146 75 28 13-18-25 0.144 104 29 15-21-29 0.142 133 30 17-23-33 0.143 163 31 19-26-37 0.146 195 32 21-28-40 0.142 251 33 23-32-46 0.142 310 34 26-36-51 0.184 84 31 14-19-26 0.182 117 33 17-22-31 0.178 149 33 19-25-35 0.182 184 35 21-28-39 0.186 220 36 23-30-43 0.179 282 36 26-34-48 0.18 349 37 29-38-54 0.23 94 34 16-20-28 0.224 130 36 19-23-33 0.221 166 37 21-26-37 0.224 204 38 23-29-41 0.229 244 39 26-32-45 0.222 314 39 29-36-51 0.222 388 40 32-40-57 0.069 47 19 8-13-20 0.067 65 21 10-15-23 0.067 83 22 11-17-26 0.067 102 23 12-18-29 0.069 122 24 13-20-32 0.067 157 25 15-23-36 0.067 194 26 17-25-40 0.098 56 25 10-15-2 0.097 78 26 12-1-25 0.097 100 27 13-20-29 0.096 122 28 15-22-32 0.099 146 29 16-24-35 0.096 188 30 18-27-39 0.096 233 31 20-30-44 0.136 66 30 12-17-23 0.132 91 31 14-19-27 0.13 116 32 15-22-31 0.132 143 33 17-24-34 0.135 171 34 19-27-38 0.131 220 35 21-30-43 0.131 272 36 24-34-47 0.176 75 33 14-18-25 0.173 104 35 16-21-29 0.171 133 36 18-23-33 0.172 163 37 20-26-37 0.176 195 38 22-28-40 0.171 251 39 24-32-46 0.171 310 40 27-36-51 0.221 84 37 15-19-26 0.219 117 38 18-22-31 0.214 149 39 20-25-35 0.219 184 40 22-28-39 0.224 220 41 24-30-43 0.215 282 42 27-34-48 0.216 349 43 30-38-54 0.277 94 40 16-20-28 0.27 130 41 19-23-33 0.266 166 42 21-26-37 0.269 204 43 24-29-41 0.276 244 44 26-32-45 0.267 314 45 29-36-51 0.267 388 46 33-40-57 Redefine your comfort zone. ™ | www.titus-hvac.com CT-540 / ¼" THICK BARS / 0° DEFLECTION / ½" SPACING WIDTH F CT-541 / ¼" THICK BARS / 15° DEFLECTION / ½" SPACING WIDTH Nominal Duct Width, Inches 0.048 2 0.068 2½ 0.088 3 0.108 3½ 0.128 4 0.168 5 0.208 6 Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall 0.011 19 3-5-10 0.011 26 3-6-12 0.011 33 3-7-13 0.011 41 4-7-15 0.011 49 4-8-16 0.011 63 4-9-18 0.011 78 5-10-20 0.025 28 5-8-15 0.024 39 6-9-18 0.024 50 7-10-20 0.024 61 7-11-22 0.025 73 8-12-24 0.024 94 9-14-27 0.024 116 10-15-30 0.043 37 12 7-10-18 0.043 52 14 8-12-21 0.042 66 15 9-13-23 0.043 82 16 10-15-26 0.044 98 17 11-16-28 0.042 125 18 12-18-32 0.043 155 19 13-20-36 Performance notes appear at end of performance data PERFORMANCE DATA Effective Area, Square Feet F57 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F CT-PP-0 / 7/32" THICK BARS / 0° DEFLECTION / 7/16" SPACING WIDTH Effective Area, Square Feet Nominal Duct Width, Inches 0.050 2 0.072 2½ 0.094 3 0.115 3½ 0.137 4 0.180 5 0.224 6 Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall 0.013 20 3-5-11 0.013 28 3-6-12 0.015 38 4-7-15 0.015 46 4-8-16 0.014 54 4-9-17 0.015 72 5-10-20 0.011 75 4-9-19 0.03 30 5-8-16 0.03 42 6-9-19 0.034 57 7-11-22 0.033 69 8-12-24 0.032 81 9-13-26 0.033 107 10-15-30 0.028 122 10-15-31 0.053 40 7-11-18 0.053 56 8-12-22 0.06 76 12 10-15-25 0.058 92 12 11-16-28 0.058 108 13 12-17-30 0.058 142 14 13-20-34 0.054 169 14 14-21-37 0.084 50 14 9-13-20 0.084 70 15 10-15-24 0.093 95 18 12-18-8 0.091 115 19 13-20-31 0.09 135 19 14-22-33 0.091 177 20 16-25-38 0.088 216 21 18-27-42 0.12 60 19 11-16-22 0.12 84 20 12-19-26 0.134 114 23 15-22-31 0.132 138 24 16-24-34 0.13 162 24 17-26-37 0.13 212 26 20-30-42 0.131 263 27 22-33-47 0.164 70 23 12-17-24 0.164 98 25 14-20-28 0.182 133 27 17-23-33 0.179 161 28 19-26-37 0.177 189 29 20-28-40 0.176 247 30 23-32-45 0.182 310 31 26-36-51 0.214 80 27 14-18-26 0.214 112 29 16-22-30 0.238 152 31 20-25-35 0.234 184 32 21-28-39 0.231 216 32 23-30-42 0.23 282 34 26-34-48 0.241 357 35 30-38-54 0.271 90 30 16-19-27 0.271 126 32 19-23-32 0.302 171 35 22-27-38 0.296 207 35 24-29-41 0.292 243 36 26-32-45 0.291 317 37 29-36-51 0.309 404 39 33-41-58 0.334 100 33 17-20-29 0.334 140 35 20-24-34 0.372 190 38 23-28-40 0.365 230 38 25-31-44 0.36 270 39 27-33-47 0.358 352 40 31-38-54 0.385 451 42 35-43-61 0.08 49 22 9-13-20 0.072 65 22 10-15-23 0.073 84 23 11-17-26 0.069 100 23 12-19-29 0.076 124 25 14-21-32 0.073 159 26 16-24-36 0.071 193 26 17-26-40 0.116 59 28 11-16-22 0.104 78 27 12-18-25 0.105 101 29 14-20-29 0.099 120 29 15-22-32 0.11 149 31 17-25-35 0.106 191 31 19-28-40 0.102 232 32 21-31-44 0.159 69 32 12-17-24 0.141 91 32 14-19-27 0.144 118 33 16-22-31 0.135 140 33 17-24-34 0.15 174 35 20-27-38 0.144 223 36 22-30-43 0.139 271 36 24-34-47 0.209 79 36 14-18-26 0.184 104 36 16-21-29 0.188 135 37 18-24-33 0.177 160 37 20-26-36 0.196 199 39 23-29-41 0.188 255 40 25-32-46 0.182 310 40 28-36-51 0.265 89 39 16-19-27 0.233 117 39 18-22-31 0.238 152 40 20-25-35 0.224 180 40 22-27-39 0.248 224 42 25-30-43 0.238 287 43 28-34-49 0.231 349 43 31-38-54 0.328 99 43 17-20-29 0.288 130 42 19-23-33 0.295 169 43 22-26-37 0.276 200 43 23-29-41 0.307 249 45 26-32-45 0.294 319 46 30-36-51 0.285 388 46 33-40-57 PERFORMANCE DATA CT-PP-3 / 7/32" THICK BARS / 30° DEFLECTION / 7/16" SPACING WIDTH F58 F58 Effective Area, Square Feet Nominal Duct Width, Inches 0.048 2 0.066 2½ 0.084 3 0.102 3½ 0.120 4 0.156 5 0.192 6 Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall Total Pressure cfm per foot Noise Criteria (NC) Throw, Side Wall 0.012 19 3-5-10 0.012 26 3-6-12 0.011 33 3-7-13 0.011 40 4-7-15 0.012 49 4-8-17 0.011 63 5-9-19 0.011 76 5-10-21 0.028 29 5-8-15 0.026 39 6-9-18 0.026 50 7-10-20 0.025 60 7-11-22 0.027 74 8-13-25 0.026 95 11 9-14-28 0.025 115 11 10-16-31 0.051 39 16 7-10-18 0.046 52 16 8-12-21 0.046 67 17 9-14-24 0.044 80 17 10-15-26 0.048 99 19 11-17-29 0.047 127 19 13-19-32 0.045 154 20 14-21-36 Performance notes appear at end of performance data diffusers PERFORMANCE DATA Throw Correction for Length (multiply) Active Length (ft) 2 4 8 10 Throw Correction 0.72 1 1.5 1.7 Note: Throw values based on applications with surface effect. Use the multiplier of 0.7 for free jet applications • NC values are based on a room absorption of 10 dB, re 10-12 watts, with a 4-foot active diffuser section. Corrections for other lengths are shown in the table below. NC Correction for Length (add) Active Length (ft) 2 4 6 8 10 NC Correction -3 0 2 3 5 • When the diffuser is used as a return intake, the NC value is increased by 4, and the negative static pressure is 0.8 times the listed total pressure • Dash (–) in space denotes an NC value less than 10 • For continuous lengths, the selection for NC is usually based on a 10-foot section • These products have been tested per ANSI/ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet and supply plenums, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Maximum available width 24 inches except frames 5, 6 and 15 (12" width). Consult your Titus representative for performance data. • For continuous lengths it is recommended that maximum active lengths are no longer than 10 feet Redefine your comfort zone. ™ | www.titus-hvac.com • All pressures are in inches of water • Throw velocities are given for terminal velocities of 150, 100 and 50 fpm. For an explanation of catalog throw data, see the Engineering Guidelines section. • Throw values are based on an active section 4 feet long • Multipliers for correcting the throw for other lengths are shown in the table below F PERFORMANCE DATA F59 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Linear Louver Diffusers LL-1 / LL-2 • Titus architectural linear louver diffusers combine crisply sculptured styling, careful workmanship, and effective air distribution • Designed for both heating and cooling applications, supply as well as return • Excellent performance in variable air volume systems. Ceiling mounted diffusers maintain a uniform, horizontal discharge pattern over widely varying flow rates. LL-1 LL-2 • Available in both one-way and two-way discharge patterns • Choice of four different frame types, all with removable cores • Accessories such as directional blades, dampers, blank-offs, and mitered corners make these diffusers even more versatile • Ideal for continuous length applications. Multiple sections are shipped with required alignment strips or pins for field installation. F metric sizes AVAILABLE MODELS: LL-1 / 1-Way Pattern / Fixed Louvers LL-2 / 2-Way Pattern / Fixed Louvers FINISHES Standard Finish - #26 White Optional Finishes - #01 Aluminum, #04 Mill, #25 Off White, #84 Black Anodized finishes available OVERVIEW Architectural / Adjustable / Aluminum Titus architectural linear louver diffusers combine crisply sculptured styling, careful workmanship, and effective air distribution. They offer excellent performance in variable air volume systems. Ceiling mounted diffusers maintain a uniform, horizontal discharge pattern over widely varying flow rates. LL-1 / LL-2 ADDITIONAL FEATURES F60 F60 • Maximum one piece section is 6 feet. Lengths greater than 6 feet are furnished in multiple sections. • Material is extruded aluminum MRI compatible See website for Specifications diffusers DIMENSIONS LL-1 - One-Way Pattern Redefine your comfort zone. ™ | www.titus-hvac.com CHOICE OF FLOW PATTERN LL-2 - Two-Way Pattern AVAILABLE WIDTHS LL-1 - One-Way Pattern LL-2 - Two-Way Pattern D' D' C C Nominal Duct Width 3½, 4¼, 5, 5¾, 6½, 8, 9½, 11¾ Nominal Duct Width 6¼, 7¾, 9¼, 10¾, 12¼ Actual Duct Width D’ 35/8, 43/8, 51⁄8, 57/8, 65/8, 81⁄8, 95/8, 117/8 Actual Duct Width D’ 63/8, 77/8, 93/8, 107/8, 123/8 Face Width C 33/8, 41⁄8, 47/8, 55/8, 63/8, 77/8, 93/8, 115/8 Face Width C 61⁄8, 75/8, 91⁄8, 105/8, 121⁄8 Frame Types 1A & 1B • Surface Flange, Duct Mount F Frame Type 2 • No Flange, Duct Mount Duct Size D' DUCT SIZE D' 1¼" 1 58" 1 1 4" 30° ⅛" A C = D' minus ¼" Type A 1A 1B ½ 1 1/16" C = D' MINUS 1/4" END FABRICATION X-X End Borders Y-Y End Borders X X LL-1 or LL-2 Frame 1A 1B O D+¾ D + 1¾ Frame 2 O D - 1/8 XY Y Y X Y LL-2 LL-1 or LL-2 D O D LL-1 XYA LL-1 DIMENSIONS D O X-Y End Borders XYB Frame 1A All dimensions are in inches O D + 3/8 Frame 2 O D - 1/16 F61 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com ACCESSORIES F Mitered Corners D D D O D O Type A Inside D O D Type B Outside Type C Inside Type D Outside 1A 1B 2 3 Corner Types A & B Width Width 3½ – 5¾ 6½ – 11¾ D O D O 12 123/8 24 243/8 12 12¾ 24 24¾ 12 1115/16 24 2315/16 12 125/8 24 245/8 Model 07 Directional Blades Corner Types C & D Width Width 3½ – 5¾ 6¼ – 11¾ D O D O 12 12 24 24 12 12 24 24 12 12 24 24 12 12 24 24 Frame Type 1A 1B 2 3 Model AG-35 AG-35 mounts on neck 15 /16" All dimensions are in inches Corner Type A Width 6¼ – 12¼ D O 24 243/8 24 24¾ 24 2315/16 24 245/8 Model LL BLK - Blank-Off 1 2 /16" Opposed Blade Damper. AG-35 will not mount on Model 07 Directional Blades. ACCESSORIES Model 07 is integral part of diffuser. Type A MODEL MC-2 / TWO-WAY 1" Blade Spacing F62 F62 MODEL MC-1 / ONE-WAY Frame Type D For all widths of Model LL diffusers. Furnished in 6-foot lengths for field cutting and installation. Steel, painted flat black. diffusers INSTALLATIONS A1 Side Wall A2 Side Wall A3 Side Wall Frame Type 1A Frame Type 1B Frame Type 1A Duct by Others Duct by Others Duct by Others Face or Glazed Brick Angle by Others Finished Brick, Granite, or Marble Veneer Finished Wood Paneling or Brick Angle by Others Ceiling Duct by Others Redefine your comfort zone. ™ | www.titus-hvac.com Side Wall F B3 Ceiling B1 Ceiling Frame Type 1A Duct by Others Frame Type 1B Finished Plaster Ceiling Duct by Others B4 Ceiling Frame Type 1B Finished Plaster Ceiling B2 Ceiling Duct by Others Duct by Others B5 Ceiling Frame Type 1B Finished Plaster Ceiling Note: Remove shipping clip before installation INSTALLATIONS Frame Type 3 Acoustical Tile Perforated Acoustical Metal Pan Ceiling F63 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F LL-1 / ONE-WAY BLOW PATTERN Effective Area, Square Feet* Nominal Duct Width, Inches 0.043 3½ 0.072 4¼ 0.106 5 0.136 5¾ 0.169 6½ 0.231 8 0.296 9½ 0.389 11¾ Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Feet, Side Wall 0.003 21 6-9-14 4-6-12 0.005 30 6-9-17 4-7-13 0.006 40 7-10-20 4-7-15 0.008 52 8-12-22 4-8-17 0.010 67 11 9-14-25 5-10-19 0.013 90 11 10-16-30 6-11-22 0.014 115 11 12-18-33 6-13-25 0.019 160 12 14-22-39 8-15-30 0.008 32 14 9-12-18 6-9-16 0.012 46 17 10-14-21 7-10-20 0.015 61 18 10-16-24 7-11-22 0.019 79 20 12-18-28 8-13-25 0.023 100 21 14-20-31 10-14-29 0.028 135 21 16-24-36 11-17-33 0.032 170 21 17-26-41 12-18-37 0.040 235 22 21-32-48 15-22-44 0.014 42 21 11-14-20 8-12-19 0.021 61 24 13-17-24 9-13-22 0.026 81 25 14-20-28 10-15-26 0.033 105 27 16-23-32 11-17-29 0.041 133 28 18-25-36 13-19-33 0.050 180 29 21-30-42 15-22-39 0.058 230 29 24-33-47 17-25-44 0.072 315 29 28-39-55 20-30-51 0.022 53 27 13-16-23 10-15-21 0.032 76 29 16-19-27 11-17-25 0.040 101 30 17-22-31 12-18-29 0.052 131 32 20-25-36 14-21-33 0.065 167 34 23-28-40 16-24-37 0.079 225 34 26-33-47 18-28-43 0.092 290 35 30-37-53 21-32-49 0.116 400 35 36-44-62 25-38-58 0.032 64 31 14-18-25 12-16-23 0.046 91 34 17-21-30 13-19-27 0.057 121 35 20-24-34 15-22-32 0.074 157 37 23-28-39 17-25-36 0.093 200 39 25-31-44 19-29-41 0.109 265 39 29-36-51 22-33-47 0.134 350 39 34-41-58 25-38-54 0.160 470 39 39-48-67 30-44-62 0.043 74 35 15-19-27 14-18-25 0.062 106 38 18-23-32 16-21-30 0.079 142 39 21-26-37 17-24-34 0.101 183 41 24-30-42 20-28-39 0.127 234 42 27-34-48 22-31-44 0.155 315 43 32-39-55 26-36-51 0.184 410 43 36-45-63 30-41-58 0.219 550 43 42-52-73 35-48-67 0.057 85 38 17-20-29 15-19-27 0.082 122 41 20-24-34 18-22-32 0.103 162 42 23-28-40 20-26-37 0.133 210 44 26-32-45 22-29-42 0.166 267 46 29-36-51 26-33-47 0.196 355 46 34-41-59 29-38-54 0.231 460 46 39-47-67 33-44-62 0.344 690 49 47-58-82 44-53-76 0.071 95 41 18-21-30 16-20-28 0.104 137 44 21-26-36 19-24-34 0.129 182 45 24-30-42 22-27-39 0.168 236 47 28-34-48 25-31-44 0.219 307 49 31-39-55 29-36-50 0.262 410 50 36-45-63 34-41-58 0.296 520 49 41-50-71 38-46-66 0.375 720 50 48-59-83 45-55-77 0.089 106 44 18-23-32 17-21-30 0.127 152 47 22-27-38 20-25-35 0.159 202 48 26-31-44 24-29-41 0.207 262 50 29-36-50 27-33-47 0.259 334 52 33-40-57 30-37-53 0.309 445 52 38-46-66 35-43-61 0.368 580 52 43-53-75 40-49-69 0.440 780 52 50-61-87 46-57-80 0.005 41 5-8-14 0.008 62 6-9-17 0.010 84 12 7-11-19 0.012 107 13 8-12-22 0.014 131 13 9-14-24 0.012 62 18 8-12-17 0.018 94 21 9-14-21 0.022 126 22 11-16-24 0.027 160 23 12-19-27 0.031 197 23 14-21-30 0.021 82 25 10-14-19 0.031 125 28 13-17-24 0.040 168 29 15-19-27 0.048 214 30 17-22-31 0.055 262 30 18-24-34 0.033 103 31 12-15-22 0.049 156 33 15-19-26 0.062 210 35 18-22-31 0.074 267 35 20-25-35 0.086 328 36 22-27-38 0.047 124 35 14-17-24 0.070 187 38 17-21-29 0.089 252 39 19-24-34 0.107 320 40 22-27-38 0.125 394 40 24-30-42 0.064 144 39 15-18-25 0.095 218 42 18-22-31 0.053 194 43 17-21-30 0.146 374 44 24-29-41 0.169 459 44 26-32-45 0.084 165 42 16-19-27 0.125 250 45 19-24-34 0.159 336 46 22-27-39 0.190 427 47 25-31-44 0.221 525 47 28-34-49 0.105 185 45 17-20-29 0.158 281 48 21-25-36 0.201 378 49 24-29-41 0.241 481 50 27-33-47 0.270 580 50 29-36-51 0.131 206 48 18-22-30 0.195 312 51 22-26-37 0.248 420 52 25-31-43 0.297 534 52 28-35-49 0.345 656 53 31-38-54 PERFORMANCE DATA LL-2 / TWO-WAY BLOW PATTERN F64 F64 Effective Area, Square Feet* Nominal Duct Width, Inches 0.101 6¼ 0.157 7¾ 0.213 9¼ 0.269 10¾ 0.325 12¼ Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling Total Pressure cfm per foot NC (Noise Criteria) Throw, Ceiling diffusers PERFORMANCE DATA Throw Correction for Length (multiply) • Dash (-) in space denotes an NC value less than 10 • For continuous lengths, the selection for NC is usually based on a 10-foot section • These products have been tested per ANSI/ASHRAE Standard 702006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • An asterisk (*) indicates effective free area per linear foot NC Correction for Length (add) Active Length (ft) 2 4 8 10 Active Length (ft) 2 4 6 8 10 Throw Correction 0.72 1 1.5 1.7 NC Correction -3 0 2 3 5 Redefine your comfort zone. ™ | www.titus-hvac.com • All pressures are in inches of water • Throw velocities are given for isothermal terminal velocities of 150, 100 and 50 fpm. For an explanation of data, see the Engineering Guidelines section. • Throw values are based on an active section 4 feet long. Multipliers for correcting the throw for other lengths are shown in the following table • NC values are based on a room absorption of 10 dB, re 10-12 watts, with a 4-foot active diffuser section. Corrections for other lengths are shown in the table below. • When the diffuser is used as a return intake, the NC value is increased by 4, and the negative static pressure is 0.8 times the listed total pressure F PERFORMANCE DATA F65 Redefine your comfort zone. ™ | www.titus-hvac.com Round Ceiling Diffusers F diffusers TMR / TMR-AA • Models TMR and TMR-AA round ceiling diffusers are designed for cooling applications • All sizes have three cones, giving a uniform appearance where different sizes are used in the same area • Uniform 360° discharge pattern • Excellent performance in variable air volume systems • The two horizontal discharge settings allow the diffuser to be adjusted for two different flow rate conditions. At Position 1, maximum capacity is obtained. At Position 2, induction is increased. • Adjustment achieved by removing the two inner cones as a unit and repositioning six screws • Spring lock allows easy removal and replacement of the two inner cones TMR / TMR-AA open ceiling AVAILABLE MODELS: See website for Specifications TMR / Steel TMR-AA / Aluminum FINISHES Standard Finish - #26 White Optional Finish - #01 Aluminum OVERVIEW Two Horizontal Discharge Patterns Models TMR and TMR-AA round ceiling diffusers are designed for both heating and cooling applications. All sizes have three cones, giving a uniform appearance where different sizes are used in the same area. They deliver a uniform 360° discharge pattern and exhibit excellent performance in variable air volume systems. TMR / TMR-AA ADDITIONAL FEATURES F66 F66 • Retainer cable provided to allow the inner core assembly to hang during maintenance of diffusers with a neck size of 12 inches or greater • Material is steel (TMR) or aluminum (TMR-AA) with steel screws TMR diffusers installed in an open ceiling office environment diffusers DIMENSIONS Redefine your comfort zone. ™ | www.titus-hvac.com TMR / TMR-AA UNIT DIMENSIONS Outside Diameter C Ceiling Opening Diameter B Nominal Round Duct Size D D minus 1/32" ¾" E (position 1) E (position 2) F Note: Position 1 is with cones down. Position 2 is with cones up. Nominal Round Duct Size D 6 8 10 12 14 16 18 20 (Note) 24 (Note) 30 (Note) 36 (Note) B C 6½ 8½ 10½ 12½ 14½ 16½ 18½ 20½ 24½ 30½ 36½ 111/8 14¾ 18¼ 22 26 29 32½ 36 43¼ 53¾ 64½ E (Pos. 1) 1¾ 21/8 27/8 31/8 33/8 4 4¾ 57/8 7¾ 81/8 101/8 E (Pos. 2) 11/8 1½ 21/8 23/8 25/8 3¼ 37/8 47/8 65/8 65/8 83/8 Note: Sizes 20 through 36 are available in steel only DIMENSIONS All dimensions are in inches F67 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA TMR / TMR-AA 6" Dia. 8" Dia. 10" Dia. 12" Dia. F 14" Dia. 16" Dia. 18" Dia. 20" Dia. PERFORMANCE DATA 24" Dia. F68 F68 30" Dia. 36" Dia. Neck Velocity Velocity Pressure Total Pressure, Pos. 1 Total Pressure, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 Airflow, cfm NC, Pos.1 NC, Pos.2 Throw feet, Pos. 1 Throw feet, Pos. 2 400 0.010 0.029 0.047 80 2-2-5 2-3-6 140 2-3-7 3-4-8 218 3-4-8 3-5-9 315 3-5-10 4-6-11 425 11 4-6-11 4-7-13 560 11 4-7-13 5-8-15 710 12 5-7-15 6-8--17 875 13 5-8-16 6-9-19 1260 14 7-10-20 8-11-23 1960 15 8-12-24 9-14-28 2820 12 16 10-15-29 11-17-34 500 0.016 0.045 0.074 100 12 2-3-6 2-4-7 175 14 3-4-8 3-5-9 273 15 3-5-10 4-6-11 390 16 4-6-12 5-7-13 530 11 17 5-7-14 5-8-15 700 12 18 5-8--16 6-9-17 885 13 18 6-9-18 7-11-19 1100 14 19 7-10-21 8-12-22 1570 16 20 8-12-24 9-14-26 2450 18 21 10-15-31 12-18-32 3520 19 22 12-18-37 14-21-39 600 0.022 0.065 0.106 120 18 2-4-7 3-4-7 210 12 19 3-5-9 4-6-9 327 14 20 4-6-12 5-7-12 470 16 21 5-7-14 6-8-14 635 17 22 6-8-16 7-10-16 840 18 23 7-10-18 8-11-19 1060 19 24 7-11-21 8-13-21 1310 20 24 8-12-23 9-14-24 1880 22 25 10-15-28 11-17-28 2940 23 27 12-18-35 14-21-35 4230 25 28 15-22-41 17-25-42 • All pressures given are in inches of water • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions • To obtain static pressure, subtract the velocity pressure from the total pressure • If the diffuser is mounted on an exposed duct, the throw values are 70% of those listed in the table and will project downward • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 700 0.031 0.089 0.145 140 14 22 3-4-8 3-5-8 245 17 24 4-6-10 4-7-10 382 19 25 5-7-12 5-8-13 550 20 26 6-9-15 7-10-15 745 22 27 7-10-17 8-11-18 980 23 28 8-11-20 9-13-20 1240 24 28 9-13-22 10-15-23 1530 25 29 10-14-25 11-16-25 2200 27 30 11-17-30 13-20-31 3430 28 31 14-21-37 16-25-38 4930 30 32 17-26-45 20-29-46 800 0.040 0.116 0.189 160 19 26 3-5-8 4-6-8 280 21 28 4-7-11 5-8-11 436 23 29 5-8-13 6-9-14 630 25 30 7-10-16 8-11-16 850 26 31 8-11-19 9-13-19 1120 27 31 9-13-21 10-15-22 1420 28 32 10-15-24 11-17-25 1750 29 33 11-16-27 13-19-27 2510 31 34 13-20-32 15-23-33 3920 33 35 16-24-40 19-28-41 5630 34 36 19-29-48 22-34-49 900 1000 1200 0.051 0.062 0.090 0.146 0.181 0.260 0.239 0.295 0.425 180 200 235 23 26 32 29 32 38 4-6-9 4-6-9 5-7-10 4-6-9 5-7-9 6-7-10 315 350 420 25 28 34 31 34 39 5-7-11 5-8-12 7-9-13 6-8-12 6-9-12 8-9-13 491 545 654 27 30 36 32 35 41 6-9-14 7-10-15 8-12-16 7-10-14 8-11-15 9-12-17 705 785 940 29 32 38 33 36 42 7-11-17 8-12-18 10-14-20 8-12-17 9-13 -18 11-14-20 955 1060 1270 30 33 39 34 37 42 8-13-20 9-14-21 11-16-23 10-14-20 11-15-21 13-16-23 1260 1400 1680 31 34 40 35 38 43 10-15-23 11-16-24 13-18-26 11-16-23 13-17-24 15-19-27 1590 1770 2120 32 35 41 36 39 44 11-17- 25 12-18-27 15-21-29 13-18-26 14-19-27 17-21-30 1970 2190 2610 33 36 42 36 39 45 12-18-28 14-20-30 16-23-33 14-20-29 16-22-30 19-24-33 2820 3140 3770 35 38 44 37 40 46 15-22-34 16-24-36 20-28-39 17-24-35 19--26-36 23-28 -40 4410 4900 5880 37 40 46 38 41 47 18-27-42 20-31-45 24-35-49 21-31-43 23-32-46 28-35-50 6340 7040 8450 38 41 47 39 43 48 22-33-51 24-37-53 29-41-59 25-37-52 28-39-55 34-42-60 1400 0.122 0.354 0.578 275 37 42 6-7-11 6-8-11 490 39 44 8-10-14 8-10-14 763 41 45 10-12-18 10-13-18 1100 43 46 11-15-21 12-15-22 1490 44 47 13-17-25 14-18-25 1960 45 48 15-20-28 17-20-29 2480 46 48 17-22-32 19-23-32 3060 47 49 19-25-35 21-25-36 4400 49 50 23-30-42 25-31-43 6860 51 51 28-37-53 31-38-54 9850 52 52 34-45-63 37-46-65 • Diffusers are shipped in Position 2 (cones down) • Data obtained from tests conducted in accordance with ANSI / ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines, for additional information. • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog Round Ceiling Diffusers (continued) diffusers Redefine your comfort zone. ™ | www.titus-hvac.com TMRA / TMRA-AA • Models TMRA and TMRA-AA adjustable round ceiling diffusers are designed for both heating and cooling applications • All sizes have four cones, giving uniformity of appearance where different sizes are used in the same area • Discharge pattern can be adjusted for horizontal flow by extending the cones or for vertical flow by retracting the cones • Uniform 360° discharge pattern • Excellent performance in variable air volume systems and open ceiling applications • Type 1 with three fixed cone positions, is adjusted by removing the three inner cones as a unit and repositioning. Available in duct sizes 6” through 36” steel, 6” through 18” aluminum. • Type 2 (steel only) is adjusted by sliding the three inner cones up or down. Available in duct sizes 6” through 12”. TMRA / TMRA-AA • Type 3 (steel only) is adjusted by rotating the center cone. Available in duct sizes 6” through 36”. energy solutions AVAILABLE MODELS: TMRA / Steel TMRA-AA / Aluminum FINISHES open ceiling See website for Specifications F • Retainer cable provided to allow the inner core assembly to hang during maintenance of diffusers with a neck size of 12 inches or greater • Material is steel or aluminum with steel components Standard Finish - #26 White Optional Finish - #01 Aluminum OVERVIEW Vertical to Horizontal Discharge Patterns / Adjustable ADDITIONAL FEATURES • Optional Type B outer cone reduces ceiling smudging. Also useful where the plenum height or the space for the ceiling openings is limited. Available for diffusers with duct sizes 6" through 24" for steel diffusers, 6" through 18" for aluminum diffusers. • Spring lock allows easy removal and replacement of the three inner cones TMRA / TMRA-AA The TMRA is an adjustable round ceiling diffuser designed for both heating and cooling applications. All sizes have four cones, giving uniformity of appearance where different sizes are used in the same area. It delivers a uniform 360° discharge pattern and exhibits excellent performance in variable air volume systems. F69 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS F TMRA / TMRA-AA UNIT DIMENSIONS Outside Diameter C Ceiling Opening Diameter B Nominal Round Duct Size D D minus 1/32" ¾" H E Open F Closed Outside Diameter BC Model B Outer Core (optional) Ceiling Opening Diameter BB Nominal Round Duct Size D DIMENSIONS Model B Outer Cone F70 F70 Nominal Round Duct Size D 6 8 10 12 14 16 18 202 242 302 362 B C E F H P1 12 16 20 24 28 32 36 40 48 60 60 13½ 18 22½ 27 31½ 36 40½ 45½ 54½ 67½ 67½ 17/16 113/16 2¼ 211/16 31/8 35/16 3¾ 41/8 47/8 59/16 59/16 /16 /8 11/8 1¼ 13/16 15/16 1½ 15/8 17/8 17/8 17/8 15/8 21/8 25/8 3¼ 3¾ 4¼ 47/8 53/8 6½ 8 8 2½ 25/8 2¾ 3½ 31/8 33/8 43/8 11 7 Type B Cone BB BC 7 17¾ 9 23¼ 11 29 13 347/8 15 405/8 17 46¾ 19 513/8 21 56¼ 25 67 NA NA NA NA All dimensions are in inches Note 1: An asterisk (*) indicates the adjusting shaft will project above the diffuser neck on sizes 14 through 36 of TMRA models with Type 3 Rotating Adjustment. The maximum projection is the same as Dimension P. Neck-mounted dampers are not compatible when in a heating configuration. Note 2: Sizes 20 through 36 are available in steel only diffusers PERFORMANCE DATA 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" Neck Velocity Velocity Pressure Total Pressure, Hor. Total Pressure, Vert. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. Airflow, cfm NC, Horizontal Horizontal Throw Ft. 400 6-6-3 4-4-2 3-3-2 3-2-2 500 0.016 0.033 0.043 100 15 2-3-6 175 16 2-4-7 273 17 3-5-9 390 17 4-6-11 530 18 4-6-13 700 18 5-7-15 885 19 6-8-17 1100 19 6-9-19 1570 20 7-11-22 2450 21 9-14-28 3520 22 11-17-33 600 0.022 0.047 0.061 120 20 2-3-7 210 21 3-4-9 327 22 4-6-11 470 23 4-7-13 635 23 5-8-15 840 24 6-9-18 1060 24 7-10-20 1310 25 7-11-22 1880 25 9-13-26 2940 26 11-17-33 4230 27 13-20-40 700 0.031 0.064 0.083 140 25 3-4-7 245 26 3-5-10 382 27 4-7-12 550 27 5-8-14 745 28 6-9-17 980 28 7-10-19 1240 29 8-12-21 1530 29 9-13-24 2200 30 10-16-29 3430 31 13-20-36 4930 32 16-23-43 800 0.040 0.084 0.109 160 29 3-5-8 280 30 4-6-10 436 31 5-7-13 630 31 6-9-15 850 32 7-10-18 1120 32 8-12-20 1420 33 9-13-23 1750 33 10-15-25 2510 34 12-18-30 3920 35 15-22-38 5630 36 18-27-46 900 0.051 0.106 0.138 180 32 3-5-8 315 33 4-7-11 491 34 6-8-13 705 35 7-10-16 955 35 8-12-19 1260 36 9-13-22 1590 36 10-15-24 1970 37 11-17-27 2820 38 13-20-32 4410 38 17-25-40 6340 39 20-30-48 1000 0.062 0.131 0.170 200 35 4-6-9 350 36 5-7-11 545 37 6-9-14 785 38 7-11-17 1060 39 9-13-20 1400 39 10-15-23 1770 40 11-17-26 2190 40 12-19-28 3140 41 15-22-34 4900 42 19-28-43 7040 42 22-33-51 1200 0.090 0.189 0.245 235 41 4-7-9 420 42 6-9-12 654 43 7-11-16 940 43 9-13-19 1270 44 10-15-22 1680 45 12-18-25 2120 45 13-20-28 2610 45 15-22-31 3770 46 18-26-37 5880 47 22-33-47 8450 48 27-40-56 1400 0.122 0.257 0.334 275 45 5-7-10 490 47 7-10-13 763 47 9-12-17 1100 48 10-14-20 1490 49 12-17-23 1960 49 14-19-27 2480 50 16-21-30 3060 50 17-24-34 4400 51 21-29-40 6860 52 26-36-50 9850 52 31-43-60 Downward Projection of Heated Air, Ft. 500 600 700 800 8-8-6 10-12-11 13-15-16 15-19-24 6-7-5 7-8-7 9-11-11 10-14-16 5-5-4 6-7-6 7-9-9 9-11-13 4-4-3 5-6-6 7-8-9 8-10-12 900 17-23-28 12-16-20 10-13-16 9-12-15 1000 19-25-33 13-18-24 11-15-19 10-13-17 1200 21-32-42 15-17-30 13-18-25 11-16-22 1400 25-38-52 17-25-36 14-20-30 12-18-27 Note: The three neck velocity values used are for 6-, 12- and 24" diffusers respectively • All pressures are given in inches of water • Throw values are given for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions • To obtain static pressure, subtract the velocity pressure from the total pressure • If the diffuser is mounted on an exposed duct, the throw values are 70 percent of those listed in the table • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • Add 1 NC for vertical setting • Downward projection of heated air values represent the distance to a total air velocity of essentially zero • Data obtained from tests conducted in accordance with ANSI / ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section Engineering Guidelines of this catalog for additional information. • For an explanation of catalog throw data, see the section, Engineering Guidelines F PERFORMANCE DATA Neck Velocity 10o F Differential 20o F Differential 30o F Differential 40o F Differential 400 0.010 0.021 0.027 80 2-2-5 140 2-3-6 218 2-4-7 315 11 3-4-9 425 11 3-5-10 560 12 4-6-12 710 12 4-7-13 875 13 5-7-15 1260 13 6-9-18 1960 14 7-11-22 2820 15 9-13-27 Redefine your comfort zone. ™ | www.titus-hvac.com TMRA / TMRA-AA F71 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Round Ceiling Diffusers (continued) XC-310 • Model XC-310 heavy duty round ceiling diffusers are designed for both heating and cooling applications • Uniform 360° discharge pattern • Excellent performance in variable air volume applications • Discharge pattern can be adjusted from full horizontal to full vertical. At the full vertical setting the diffuser forces the air in a long downward projection. The result is effective heating and spot cooling from high mounting locations. • Especially suitable for factories, warehouses, convention halls, coliseums, shopping malls, and other applications where ceilings are high and conditions are variable XC-310 F factories AVAILABLE MODEL: See website for Specifications XC-310 / Steel / Ring Operated / Vertical to Horizontal Discharge Pattern FINISH Standard Finish - #26 White OVERVIEW Adjustable Heavy Duty / Steel Titus model XC-310 heavy duty round ceiling diffusers are especially suitable for factories, warehouses, convention halls, coliseums, shopping malls, and other applications where ceilings are high and conditions are variable. ADDITIONAL FEATURES XC-310 • Ring operator can be adjusted with a pole • Outer cone is contoured to guard against ceiling smudging • Optional damper is adjustable by removing the inner core of the diffuser • Material is steel F72 F72 open ceiling Face View diffusers DIMENSIONS Redefine your comfort zone. ™ | www.titus-hvac.com XC-310 UNIT DIMENSIONS Outside Diameter C Ceiling Opening Diameter B Nominal Round Duct Size D D minus 1/32" E Open F Closed Threaded Post Nut G Ring Operator Nominal Round Duct Size D B C E F G 10 12 14 16 18 20 24 30 36 10½ 12½ 14½ 16½ 18½ 20½ 24½ 30½ 36½ 18¼ 22 26 29 32½ 36 43¼ 535/8 643/8 7½ 93/8 6¾ 8½ 91/8 103/8 12¼ 137/8 155/8 3 4 4 5 5 5½ 65/8 8¼ 10 10 12 14 16 18 20 24 30 36 F DIMENSIONS All dimensions are in inches F73 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA XC-310 10" DIa. 12" DIa. 14" DIa. F 18" DIa. 20" DIa. 24" DIa. PERFORMANCE DATA 30" DIa. F74 F74 36" DIa. Neck Velocity Velocity Pressure Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet,H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm Air Flow, cfm Total Pressure, H Total Pressure, V NC ( Noise Criterion), H. NC ( Noise Criterion), V. Throwfeet, H. Throw feet, V, 20F Cool Delta-T, 50 fpm Throw feet, V, 40F Heat Delta-T, 50 fpm 400 0.010 220 0.021 0.012 1-2-4 16 5 315 0.021 0.012 11 2-2-5 14 4 425 0.020 0.012 12 2-3-5 13 4 710 0.020 0.011 13 2-3-7 14 4 875 0.020 0.010 14 11 3-4-8 14 4 1260 0.019 0.010 15 12 3-5-9 16 5 1963 0.017 0.009 16 13 4-6-12 19 2 2827 0.016 0.007 17 14 5-7-14 22 1 500 0.016 270 0.033 0.019 17 14 2-2-5 20 7 390 0.032 0.019 18 15 2-3-6 20 6 530 0.032 0.018 19 16 2-3-7 20 6 885 0.031 0.017 20 17 3-4-9 21 6 1100 0.031 0.016 21 18 3-5-10 23 7 1570 0.029 0.014 22 19 4-6-12 25 7 2454 0.027 0.014 23 20 5-7-14 29 3 3534 0.024 0.012 24 21 6-9-17 34 2 600 0.022 330 0.047 0.027 22 19 2-3-6 24 8 470 0.046 0.028 23 20 2-3-7 24 8 635 0.046 0.028 24 21 3-4-8 26 8 1060 0.045 0.028 26 23 3-5-10 30 9 1310 0.044 0.028 26 23 4-6-12 32 9 1880 0.042 0.028 27 24 5-7-14 35 10 2945 0.039 0.020 29 26 6-9-17 42 5 4241 0.035 0.017 30 27 7-10-21 49 3 • All pressures are in inches of water • Radius of diffusion values are given for a terminal velocity of 50 fpm with a 20°F cooling temperature differential • Vertical projection values are given for a terminal velocity of 50 fpm. Minimum projections are for a 40°F heating temperature differential, while maximum projections are for a 20°F cooling differential. 700 0.031 380 0.064 0.037 27 24 2-3-7 28 9 550 0.063 0.038 28 25 3-4-8 28 9 745 0.063 0.038 29 26 3-5-9 31 10 1240 0.061 0.038 31 28 4-6-12 37 12 1530 0.060 0.038 31 28 4-7-13 40 13 2200 0.057 0.038 32 29 5-8-16 47 14 3436 0.053 0.027 34 31 7-10-20 57 7 4948 0.048 0.023 35 32 8-12-24 67 4 800 0.040 435 0.083 0.048 31 28 3-4-8 32 11 630 0.083 0.050 32 29 3-5-9 33 11 850 0.082 0.050 33 30 4-5-11 35 12 1420 0.079 0.050 35 32 5-7-14 42 14 1750 0.078 0.050 35 32 5-8-15 46 15 2510 0.075 0.050 36 33 6-9-18 54 18 3927 0.069 0.036 38 35 8-12-23 66 9 5655 0.063 0.030 39 36 9-14-28 78 5 900 0.051 490 0.105 0.061 35 32 3-4-9 36 12 705 0.104 0.063 36 33 3-5-10 36 12 955 0.103 0.063 37 34 4-6-12 39 13 1590 0.101 0.063 38 35 5-8-16 47 16 1970 0.099 0.063 39 36 6-9-17 52 17 2820 0.095 0.063 40 37 7-10-21 60 20 4418 0.088 0.045 41 38 9-13-26 74 11 6362 0.079 0.038 42 39 10-16-31 88 6 1000 0.062 545 0.130 0.076 38 35 3-5-10 40 13 785 0.129 0.078 39 36 4-6-12 41 14 1060 0.128 0.078 40 37 4-7-13 44 15 1770 0.124 0.078 42 39 6-9-17 53 18 2190 0.122 0.078 42 39 6-10-19 57 19 3140 0.117 0.078 43 40 8-12-23 67 22 4909 0.108 0.056 45 42 10-14-29 82 14 7069 0.098 0.046 46 43 12-17-35 98 8 1200 0.090 655 0.187 0.109 44 41 4-6-12 48 16 940 0.186 0.113 45 42 5-7-14 49 16 1270 0.184 0.113 46 43 5-8-16 52 17 2120 0.179 0.113 47 44 7-10-21 63 21 2610 0.176 0.113 48 45 8-11-23 68 23 3770 0.169 0.113 49 46 9-14-28 81 27 5890 0.156 0.081 50 47 12-17-35 99 20 8482 0.141 0.067 51 48 14-21-41 117 11 1400 0.122 765 0.255 0.148 49 46 4-7-13 56 19 1100 0.253 0.153 50 47 5-8-16 57 19 1490 0.250 0.153 51 48 6-9-19 61 20 2480 0.243 0.153 52 49 8-12-24 74 25 3060 0.239 0.153 53 50 9-13-27 80 27 4400 0.230 0.153 54 51 11-16-32 94 31 6872 0.213 0.110 55 52 13-20-40 115 25 9896 0.191 0.091 56 53 16-24-48 137 15 1600 0.160 870 0.333 0.194 53 50 5-8-15 63 21 1255 0.330 0.200 54 51 6-9-18 65 22 1695 0.327 0.200 55 52 7-11-21 70 23 2830 0.318 0.200 56 53 9-14-28 84 28 3500 0.312 0.200 57 54 10-15-31 92 31 5020 0.300 0.200 58 55 12-18-37 107 36 7854 0.278 0.144 59 56 15-23-46 132 28 11310 0.250 0.119 60 57 18-28-55 156 20 • NC values are based on a room absorption of 10 dB, re 10-12 watts. Values shown are for the horizontal discharge pattern (center closed). For the vertical pattern (center open), subtract three. • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. diffusers Round Ceiling Diffusers (continued) Redefine your comfort zone. ™ | www.titus-hvac.com V-1 • Model V-1 round ceiling diffusers are designed for both heating and cooling applications • Vortex generators spin the air in a spiral pattern. This creates a Coanda effect, forcing the air to adhere to the curved border and spread evenly across the ceiling. • Uniform 360° discharge pattern • Excellent performance in variable air volume applications • Especially suitable for foyers, waiting rooms and other areas with recessed lighting fixtures. Complements black light and down light fixtures. • Adjusted from horizontal to vertical discharge vortex by opening the blank-off plate in the center V-1 recessed lighting AVAILABLE MODEL: See website for Specifications F V-1 / Vortex Diffuser FINISH Standard Finish - #84 Black OVERVIEW Adjustable Vortex / Steel Vortex generators spin the air in a spiral pattern. This creates a Coanda effect, forcing the air to adhere to the curved border and spread evenly across the ceiling. These diffusers are especially suitable for foyers, waiting rooms and other areas with recessed lighting fixtures. ADDITIONAL FEATURES • Optional damper is adjusted through the diffuser face. Access for adjustment is gained by opening the blank-off plate. • Material is steel V-1 F75 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS V-1 UNIT DIMENSIONS Nominal Round Duct Size D D minus 1/8" G Vortex Generators Blank-Off Plate 8" F H 1" Radius D Plus 2" G H 6 8 10 12 14 16 18 37/8 51/8 63/16 87/16 97/16 107/16 127/16 37/8 37/8 37/8 47/8 47/8 47/8 47/8 DIMENSIONS Nominal Round Duct Size D F76 F76 All dimensions are in inches diffusers PERFORMANCE DATA 6" Dia. Airflow, cfm Total Press. Rad. of Diff. NC 50 0.07 1–1–1 — 75 0.14 1–1–2 19 87 0.19 1–2–2 23 100 0.25 1–2–3 27 115 0.33 1–2–3 30 125 0.39 2–2–4 34 137 0.47 2–3–4 37 150 0.56 2–3–5 39 8" Dia. Airflow, cfm Total Press. Rad. of Diff. NC 125 0.12 1–2–3 20 150 0.18 2–2–4 25 175 0.23 2–3–4 29 200 0.3 2–3–5 32 225 0.38 2–3–6 35 250 0.47 2–4–6 39 275 0.55 3–4–7 42 300 0.66 3–5–8 44 10" Dia. Airflow, cfm Total Press. Rad. of Diff. NC 150 0.15 1–2–3 21 175 0.2 2–2–4 25 200 0.26 2–3–4 28 225 0.33 2–3–5 32 250 0.4 2–4–6 35 275 0.48 2–4–6 38 300 0.56 3–4–7 40 325 0.65 3–5–8 42 12" Dia. Airflow, cfm Total Press. Rad. of Diff. NC 225 0.18 2–3–4 26 250 0.23 2–3–5 29 275 0.27 2–3–6 32 300 0.32 2–4–6 35 325 0.38 3–4–7 37 350 0.45 3–4–7 39 375 0.5 3–5–8 41 400 0.57 3–5–8 43 14" Dia. Airflow, cfm Total Press. Rad. of Diff. NC 250 0.11 2–3–5 23 300 0.15 2–3–6 29 350 0.2 2–4–7 33 400 0.26 3–5–8 27 450 0.34 3–5–9 41 500 0.41 3–6–10 44 550 0.5 4–6–11 47 600 0.6 4–7–12 49 16" Dia. Airflow, cfm Total Press. Rad. of Diff. NC 400 0.18 2–4–7 30 450 0.22 3–4–7 33 500 0.29 3–5–8 36 550 0.35 3–5–9 39 600 0.41 4–6–10 42 650 0.48 4–6–11 44 700 0.56 4–7–12 46 750 0.64 4–7–13 49 18" Dia. Airflow, cfm Total Press. Rad. of Diff. NC 500 0.22 3–4–8 31 550 0.27 3–5–9 34 600 0.32 3–5–9 37 650 0.37 3–6–10 39 700 0.44 4–6–11 41 750 0.5 4–7–12 43 800 0.57 4–7–13 45 850 0.64 4–8–14 47 • All pressures are in inches of water • Radius of diffusion values (feet) are given for terminal velocities of 150, 100 and 50 fpm Redefine your comfort zone. ™ | www.titus-hvac.com V-1 F • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • NC (noise criteria) values are based on a room absorption of 10 dB, re 10-12 watts PERFORMANCE DATA F77 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Perforated Ceiling Diffusers PAS / PAR / PDS / PDR • Titus perforated ceiling diffusers are designed for both heating and cooling applications • Excellent performance in variable air volume systems • A tight, uniform, horizontal blanket of air protects the ceiling against smudging • Return models have the same face and border construction as the supply models, for harmonious appearance in the room • Discharge pattern (supply models) can be adjusted to vertical as well as to 1-, 2-, 3- or 4-way horizontal. Can be adjusted before or after installation. PAS PAR • Discharge pattern is easily adjusted by unlatching and dropping the perforated face, then rotating the pattern controllers • Dropping the perforated face also gives access to the optional damper F metric sizes AVAILABLE MODELS: Steel Models: PAS / Supply / Flush Face PAR / Return / Flush Face PDS / Supply / Drop Face PDR / Return / Drop Face Aluminum Models: PAS-AA / Supply / Flush Face PAR-AA / Return / Flush Face FINISH PAS / PAR / PDS / PDR Standard Finish - #26 White F78 F78 OVERVIEW 1-, 2-, 3-, or 4-Way Discharge Pattern Perforated ceiling diffusers are typically selected to meet architectural demands for air outlets that blend into the ceiling plane. Titus perforated diffusers can be selected for a round pattern to maximize capacity or star pattern to maximize throw. ADDITIONAL FEATURES • Perforated face has 3/16" diameter holes on ¼" staggered centers • Inlet collar (neck) has ample depth for easy duct connection • Material is heavy gauge steel backpan; steel or aluminum perforated face according to the model selected • Optional factory-installed R-6 foil-backed insulation available for 24 x 24" full face models, neck sizes 6-16, borders 1, 2, 3 and 4 See website for Specifications diffusers DIMENSIONS PAS Ceiling Air Flow Nominal Duct Size D 6x6 8x8 10 x 10 12 x 12 14 x 14 15 x 15 18 x 6 18 x 18 22 x 10 22 x 22 46 x 22 6” Dia. 8” Dia. 10” Dia. 12” Dia. 14” Dia. 16” Dia. 12x12 ● ❏ ● ● ● ● ● ❏ ● ❏ ❏ ● Air Flow Face or Ceiling Module Size 24x12 16x16 20x20 24x24 ● ● ● ● ● ● ● ● Available in supply models and return models 48x24 ● ● ● ● ● ● ● ● ● ● ❏ Available in return models only ●/❏ Shaded areas indicate sizes available with aluminum face F ❏ ❏ ● ● ● Ceiling Redefine your comfort zone. ™ | www.titus-hvac.com TYPICAL DISCHARGE PATTERN - ELEVATION ● ● ● ● ● ● ❏ ● ● ● ● ● ● DIMENSIONS All dimensions are in inches F79 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS MODELS PAS / PAS-AA / SUPPLY Border Type 3 (Lay-In) Border Type 4SL (Spline Side Lock) Nominal Duct Size D D minus ⅛" (4) Pattern Controllers (Adjustable) Note: 4SL can be installed after ceiling tiles are in place 3" Ceiling Module minus ¼" Ceiling Module Size Border Type 1 (Surface Mount) Border Type 2 (Snap-In) Nominal Face Size minus 1" F Ceiling Module Size minus 1/16" Border Type 4 (Spline) 1" Border ¼" Ceiling Module Size minus 1/16" Nominal Face Size Nominal Face Size plus 1" Ceiling Module Size minus 1/16" MODEL PDS - SUPPLY Border Type 3 (Lay-In or Tegular) (Lay-In shown) Border Type 4SL (Spline Side Lock) Nominal Duct Size D D minus ⅛" Note: 4SL can be installed after ceiling tiles are in place. (4) Pattern Controllers (Adjustable) 3" ⅜" ⅜" Ceiling Module minus ¼" Ceiling Module Size minus 1/16" DIMENSIONS Ceiling Module Size Border Type 1 (Surface Mount) Nominal Face Size minus 1" Border Type 4 (Spline) 1" Border ¼" ⅜" ⅜" ⅜" Nominal Face Size Nominal Face Size plus 1" F80 F80 Border Type 2 (Snap-In) Ceiling Module Size minus 1/16" All dimensions are in inches Ceiling Module Size minus 1/16" diffusers DIMENSIONS Insulation is R-6 where blanket has the most depth. One" clearance on each side of neck is left for insulated duct connection. 24 x 24" module size only. Blanket is factory installed. MODELS PAR, PAR-AA - RETURN Border Type 3 (Lay-In when duct size = module size - 2) Border Type 4SL (Spline Side Lock) Nominal Duct Size D D minus ⅛" Note: 4SL can be installed after ceiling tiles are in place 2⅛" Ceiling Module minus ¼" Ceiling Module Size Border Type 3 (Lay-In for other standard duct sizes) Ceiling Module Size minus 1/16" Redefine your comfort zone. ™ | www.titus-hvac.com OPTIONAL MOLDED INSULATION BLANKET F Border Type 4 (Spline) Nominal Duct Size D D minus ⅛" 3" Ceiling Module minus ¼" Ceiling Module Size Border Type 1 (Surface Mount) Nominal Face Size minus 1" Ceiling Module Size minus 1/16" Border Type 2 (Snap-In) 1" Border ⅜" Nominal Face Size Nominal Face Size plus 1" Ceiling Module Size minus 1/16" All dimensions are in inches DIMENSIONS ¼" F81 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS MODEL PDR - RETURN Border Type 3 (Lay-In or Tegular when duct size = module size - 2) (Lay-In shown) Border Type 4SL (Spline Side Lock) Note: 4SL can be installed after ceiling tiles are in place Nominal Duct Size D D minus ⅛" ⅜" 2⅛" ⅜" Ceiling Module minus ¼" Ceiling Module Size Ceiling Module Size minus 1/16" Border Type 3 (Lay-In or Tegular for other standard duct sizes) (Lay-In shown) Nominal Duct Size D Border Type 4 (Spline) D minus ⅛" F 3" ⅜" ⅜" Border Type 1 (Surface Mount) Nominal Face Size minus 1" Border Type 2 (Snap-In) 1" Border ¼" ⅜" ⅜" Ceiling Module Size minus 1/16" DIMENSIONS Nominal Face Size Nominal Face Size plus 1" F82 F82 Ceiling Module Size minus 1/16" Ceiling Module minus ¼" Ceiling Module Size All dimensions are in inches diffusers PERFORMANCE DATA 12 x 12 Module 6" Dia. 6x6 Neck 24 x 12 Module 6" Dia. 6x6 Neck 6" Dia. 8" Dia. 8x8 Neck 10" Dia. 300 0.006 59 0.016 1-2-7 1-2-5 1-2-5 1-2-3 75 0.017 1-2-8 1-2-6 1-3-5 1-2-4 59 0.016 1-2-7 1-2-5 1-2-5 1-2-3 75 0.017 1-2-8 1-2-6 1-3-5 1-2-4 59 0.016 1-2-8 1-2-6 1-2-5 1-2-4 75 0.017 1-3-9 1-3-6 1-3-5 1-2-4 105 0.018 1-3-10 1-3-8 2-3-6 1-2-5 133 0.019 2-4-12 2-4-9 2-4-7 1-3-6 164 0.020 2-4-13 2-4-10 2-4-8 1-3-6 400 0.010 79 0.028 2-4-10 2-4-7 2-3-6 1-2-5 100 0.029 2-4-11 2-4-8 2-3-7 1-3-5 79 0.028 2-4-10 2-4-7 2-3-6 1-2-5 100 0.029 2-4-11 2-4-8 2-3-7 1-3-5 79 0.028 2-4-10 2-4-8 2-3-6 2-2-5 100 0.029 2-5-12 2-4-9 2-4-7 2-3-6 140 0.032 3-6-14 3-5-10 3-4-9 2-3-7 178 0.034 12 3-7-16 3-6-11 3-5-10 2-4-7 218 0.036 14 3-7-17 3-6-13 4-5-11 3-4-8 500 0.016 98 0.044 2-6-12 2-4-9 3-4-8 2-3-6 125 0.046 13 3-6-14 3-5-10 3-4-9 2-3-7 98 0.044 2-6-12 2-4-9 3-4-8 2-3-6 125 0.046 13 3-6-14 3-5-10 3-4-9 2-3-7 98 0.044 3-7-13 3-5-10 3-4-8 2-3-6 125 0.046 13 3-7-15 3-5-11 3-5-9 2-3-7 175 0.049 16 4-9-17 4-6-13 4-5-11 3-4-8 222 0.052 19 5-10-20 5-7-14 4-6-12 3-5-9 273 0.056 21 5-11-22 5-8-16 4-7-13 3-5-10 600 0.022 118 0.064 16 4-7-15 4-5-11 3-5-9 2-3-7 150 0.066 19 4-8-17 4-6-12 3-5-10 3-4-8 118 0.064 16 4-7-15 4-5-11 3-5-9 2-3-7 150 0.066 19 4-8-17 4-6-12 3-5-10 3-4-8 118 0.064 16 4-8-15 4-6-11 3-5-10 2-4-7 150 0.066 19 5-9-17 4-6-13 4-5-11 3-4-8 209 0.071 22 6-10-20 5-8-15 4-6-13 3-5-10 267 0.075 25 7-12-23 6-9-17 5-7-15 4-6-11 327 0.080 27 7-13-26 6-10-19 5-8-16 4-6-12 700 0.031 137 0.087 21 5-9-17 4-6-12 4-5-11 3-4-8 175 0.090 23 5-10-19 5-7-14 4-6-12 3-5-9 137 0.087 21 5-9-17 4-6-12 4-5-11 3-4-8 175 0.090 23 5-10-19 5-7-14 4-6-12 3-5-9 137 0.087 21 6-9-17 4-7-13 4-6-11 3-4-9 175 0.090 23 7-10-19 5-8-15 4-6-13 3-5-10 244 0.097 27 8-12-22 6-9-18 5-8-15 4-6-12 311 0.103 29 9-14-25 7-10-20 6-9-17 4-7-13 382 0.109 32 10-15-28 7-11-22 6-9-19 5-7-14 Performance notes appear at end of performance data 800 0.040 157 0.113 25 6-10-18 5-7-14 4-6-12 3-5-9 200 0.118 28 7-11-20 5-8-16 5-7-14 3-5-10 157 0.113 25 6-10-18 5-7-14 4-6-12 3-5-9 200 0.118 28 7-11-20 5-8-16 5-7-14 3-5-10 157 0.113 25 7-10-18 5-8-15 4-6-12 3-5-10 200 0.118 28 8-12-20 6-9-17 5-7-14 4-6-11 279 0.126 31 9-14-24 7-10-20 6-9-17 4-7-13 356 0.134 34 10-16-27 8-11-23 6-10-19 5-7-15 436 0.143 36 12-17-30 8-13-25 7-11-21 5-8-16 1000 0.062 196 0.177 32 8-12-20 6-9-17 5-8-14 4-6-11 250 0.184 35 9-14-22 7-10-19 6-9-16 4-7-12 196 0.177 32 8-12-20 6-9-17 5-8-14 4-6-11 250 0.184 35 9-14-22 7-10-19 6-9-16 4-7-12 196 0.177 32 9-13-20 6-10-17 5-8-14 4-6-11 250 0.184 35 10-15-22 7-11-19 6-9-16 5-7-12 349 0.197 38 12-17-26 8-13-22 7-11-18 5-8-15 444 0.210 41 13-20-30 10-14-25 8-12-21 6-9-16 545 0.223 43 15-22-33 11-16-28 9-13-23 7-10-18 1200 0.090 236 0.255 38 10-15-22 7-11-18 6-9-15 5-7-12 300 0.265 41 11-17-24 8-12-21 7-10-17 5-8-13 236 0.255 38 10-15-22 7-11-18 6-9-15 5-7-12 300 0.265 41 11-17-24 8-12-21 7-10-17 5-8-13 236 0.255 38 10-15-22 8-11-18 6-10-15 5-7-12 300 0.265 41 12-17-24 9-13-21 7-11-17 6-8-13 419 0.284 44 14-20-29 10-15-25 9-13-20 7-10-16 533 0.302 47 16-23-33 11-17-28 10-15-23 7-11-18 654 0.321 49 17-26-36 13-19-31 11-16-25 8-12-20 1400 0.122 275 0.347 43 11-17-23 8-12-20 7-11-16 5-8-13 350 0.360 45 13-19-26 9-14-22 8-12-19 6-9-15 275 0.347 43 11-17-23 8-12-20 7-11-16 5-8-13 350 0.360 45 13-19-26 9-14-22 8-12-19 6-9-15 275 0.347 43 12-17-23 9-13-20 8-11-16 6-9-13 350 0.360 45 14-19-26 10-15-22 9-13-19 7-10-15 489 0.386 49 16-22-31 12-18-27 10-15-22 8-12-17 622 0.411 51 18-25-35 13-20-30 11-17-25 9-13-19 764 0.437 54 20-28-39 15-22-33 13-19-27 10-14-21 F PERFORMANCE DATA 16 x 16 Module 6x6 Neck Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Redefine your comfort zone. ™ | www.titus-hvac.com PAS FLUSH FACE / SUPPLY / STEEL / ADJUSTABLE F83 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PAS FLUSH FACE / SUPPLY / STEEL / ADJUSTABLE 6" Dia. 6 x 6 Neck 8" Dia. 8 x 8 Neck 20 x 20 Module F 10" Dia. PERFORMANCE DATA 10 x 10 Neck F84 F84 12" Dia. 14" Dia. Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw 300 0.006 59 0.016 1-2-8 1-2-6 1-2-5 1-2-4 75 0.017 1-3-9 1-3-6 1-3-5 1-2-4 105 0.018 1-3-10 1-3-8 2-3-6 1-2-5 133 0.019 2-4-12 2-4-9 2-4-7 1-3-6 164 0.020 2-4-13 2-4-10 2-4-8 1-3-6 208 0.022 2-5-15 2-5-11 2-5-9 2-3-7 236 0.032 7-12-22 6-8-17 5-7-14 4-6-11 321 0.034 12 8-14-25 7-10-20 6-8-17 4-6-13 400 0.010 79 0.028 2-4-10 2-4-8 2-3-6 2-2-5 100 0.029 2-5-12 2-4-9 2-4-7 2-3-6 140 0.032 3-6-14 3-5-10 3-4-9 2-3-7 178 0.034 12 3-7-16 3-6-11 3-5-10 2-4-7 218 0.036 14 3-7-17 3-6-13 4-5-11 3-4-8 278 0.039 16 4-8-20 4-7-14 4-6-12 3-5-9 314 0.057 18 10-16-25 8-11-21 6-10-18 5-7-14 428 0.060 21 12-18-29 9-13-25 7-11-20 6-9-16 500 0.016 98 0.044 3-7-13 3-5-10 3-4-8 2-3-6 125 0.046 13 3-7-15 3-5-11 3-5-9 2-3-7 175 0.049 16 4-9-17 4-6-13 4-5-11 3-4-8 222 0.052 19 5-10-20 5-7-14 4-6-12 3-5-9 273 0.056 21 5-11-22 5-8-16 4-7-13 3-5-10 347 0.061 23 6-12-25 6-9-18 5-8-15 4-6-12 393 0.089 25 13-19-28 9-14-24 8-12-20 6-9-15 535 0.093 28 15-23-33 11-17-28 9-14-23 7-11-18 600 0.022 118 0.064 16 4-8-15 4-6-11 3-5-10 2-4-7 150 0.066 19 5-9-17 4-6-13 4-5-11 3-4-8 209 0.071 22 6-10-20 5-8-15 4-6-13 3-5-10 267 0.075 25 7-12-23 6-9-17 5-7-15 4-6-11 327 0.080 27 7-13-26 6-10-19 5-8-16 4-6-12 417 0.087 29 8-15-29 7-11-21 6-9-18 5-7-14 471 0.128 30 16-22-31 11-17-26 10-14-21 7-11-17 641 0.135 34 18-25-36 13-20-30 11-17-25 9-13-20 700 0.031 137 0.087 21 6-9-17 4-7-13 4-6-11 3-4-9 175 0.090 23 7-10-19 5-8-15 4-6-13 3-5-10 244 0.097 27 8-12-22 6-9-18 5-8-15 4-6-12 311 0.103 29 9-14-25 7-10-20 6-9-17 4-7-13 382 0.109 32 10-15-28 7-11-22 6-9-19 5-7-14 486 0.119 34 11-17-31 8-13-25 7-11-21 5-8-16 550 0.174 35 18-23-33 13-20-28 11-16-23 9-13-18 748 0.183 38 21-27-39 15-23-33 13-19-27 10-15-21 Performance notes appear at end of performance data 800 0.040 157 0.113 25 7-10-18 5-8-15 4-6-12 3-5-10 200 0.118 28 8-12-20 6-9-17 5-7-14 4-6-11 279 0.126 31 9-14-24 7-10-20 6-9-17 4-7-13 356 0.134 34 10-16-27 8-11-23 6-10-19 5-7-15 436 0.143 36 12-17-30 8-13-25 7-11-21 5-8-16 556 0.155 38 13-20-33 10-14-28 8-12-23 6-9-18 628 0.227 40 20-25-35 15-21-30 13-18-25 10-14-19 855 0.239 43 24-29-41 18-25-35 15-20-29 11-16-23 1000 0.062 196 0.177 32 9-13-20 6-10-17 5-8-14 4-6-11 250 0.184 35 10-15-22 7-11-19 6-9-16 5-7-12 349 0.197 38 12-17-26 8-13-22 7-11-18 5-8-15 444 0.210 41 13-20-30 10-14-25 8-12-21 6-9-16 545 0.223 43 15-22-33 11-16-28 9-13-23 7-10-18 694 0.243 45 16-25-37 12-18-32 10-15-26 8-12-20 785 0.355 47 23-28-40 19-24-34 16-20-28 12-15-22 1069 0.374 50 27-33-46 22-28-39 19-23-32 14-18-25 1200 0.090 236 0.255 38 10-15-22 8-11-18 6-10-15 5-7-12 300 0.265 41 12-17-24 9-13-21 7-11-17 6-8-13 419 0.284 44 14-20-29 10-15-25 9-13-20 7-10-16 533 0.302 47 16-23-33 11-17-28 10-15-23 7-11-18 654 0.321 49 17-26-36 13-19-31 11-16-25 8-12-20 833 0.349 51 20-29-41 14-21-35 12-18-29 9-14-22 942 0.510 52 25-31-43 21-26-37 18-21-30 14-17-24 1283 0.538 56 29-36-51 25-30-43 20-25-35 16-20-28 1400 0.122 275 0.347 43 12-17-23 9-13-20 8-11-16 6-9-13 350 0.360 45 14-19-26 10-15-22 9-13-19 7-10-15 489 0.386 49 16-22-31 12-18-27 10-15-22 8-12-17 622 0.411 51 18-25-35 13-20-30 11-17-25 9-13-19 764 0.437 54 20-28-39 15-22-33 13-19-27 10-14-21 972 0.476 56 23-31-44 17-25-37 14-21-31 11-16-24 1100 0.695 57 27-33-47 23-28-40 19-23-33 15-18-26 1497 0.733 60 32-39-55 27-33-47 22-27-38 17-21-30 diffusers PERFORMANCE DATA 6" Dia. 6 x 6 Neck 8" Dia. 8 x 8 Neck 24 x 24 Module 10" Dia. 10 x 10 Neck 12" Dia. 14" Dia. 16" Dia. 300 0.006 59 0.016 1-2-8 1-2-6 1-2-5 1-2-4 75 0.017 1-3-9 1-3-6 1-3-5 1-2-4 105 0.018 1-3-10 1-3-8 2-3-6 1-2-5 133 0.019 2-4-12 2-4-9 2-4-7 1-3-6 164 0.020 2-4-13 2-4-10 2-4-8 1-3-6 208 0.022 2-5-15 2-5-11 2-5-9 2-3-7 236 0.032 7-12-22 6-8-17 5-7-14 4-6-11 300 0.033 8-13-24 6-10-19 5-8-16 4-6-12 321 0.034 12 8-14-25 7-10-20 6-8-17 4-6-13 419 0.036 14 10-16-29 8-11-23 6-10-19 5-7-15 400 0.010 79 0.028 2-4-10 2-4-8 2-3-6 2-2-5 100 0.029 2-5-12 2-4-9 2-4-7 2-3-6 140 0.032 3-6-14 3-5-10 3-4-9 2-3-7 178 0.034 12 3-7-16 3-6-11 3-5-10 2-4-7 218 0.036 14 3-7-17 3-6-13 4-5-11 3-4-8 278 0.039 16 4-8-20 4-7-14 4-6-12 3-5-9 314 0.057 18 10-16-25 8-11-21 6-10-18 5-7-14 400 0.059 20 12-18-28 9-13-24 7-11-20 6-8-16 428 0.060 21 12-18-29 9-13-25 7-11-20 6-9-16 559 0.063 23 14-21-33 10-15-28 9-13-23 7-10-18 500 0.016 98 0.044 3-7-13 3-5-10 3-4-8 2-3-6 125 0.046 13 3-7-15 3-5-11 3-5-9 2-3-7 175 0.049 16 4-9-17 4-6-13 4-5-11 3-4-8 222 0.052 19 5-10-20 5-7-14 4-6-12 3-5-9 273 0.056 21 5-11-22 5-8-16 4-7-13 3-5-10 347 0.061 23 6-12-25 6-9-18 5-8-15 4-6-12 393 0.089 25 13-19-28 9-14-24 8-12-20 6-9-15 500 0.092 27 15-22-32 11-16-27 9-14-22 7-10-17 535 0.093 28 15-23-33 11-17-28 9-14-23 7-11-18 698 0.099 31 17-26-37 13-19-32 11-16-26 8-12-21 600 0.022 118 0.064 16 4-8-15 4-6-11 3-5-10 2-4-7 150 0.066 19 5-9-17 4-6-13 4-5-11 3-4-8 209 0.071 22 6-10-20 5-8-15 4-6-13 3-5-10 267 0.075 25 7-12-23 6-9-17 5-7-15 4-6-11 327 0.080 27 7-13-26 6-10-19 5-8-16 4-6-12 417 0.087 29 8-15-29 7-11-21 6-9-18 5-7-14 471 0.128 30 16-22-31 11-17-26 10-14-21 7-11-17 600 0.133 33 18-24-35 13-19-29 11-16-24 8-12-19 641 0.135 34 18-25-36 13-20-30 11-17-25 9-13-20 838 0.143 36 21-29-41 15-23-35 13-19-29 10-15-23 700 0.031 137 0.087 21 6-9-17 4-7-13 4-6-11 3-4-9 175 0.090 23 7-10-19 5-8-15 4-6-13 3-5-10 244 0.097 27 8-12-22 6-9-18 5-8-15 4-6-12 311 0.103 29 9-14-25 7-10-20 6-9-17 4-7-13 382 0.109 32 10-15-28 7-11-22 6-9-19 5-7-14 486 0.119 34 11-17-31 8-13-25 7-11-21 5-8-16 550 0.174 35 18-23-33 13-20-28 11-16-23 9-13-18 700 0.181 38 20-26-37 15-22-32 13-19-26 10-15-21 748 0.183 38 21-27-39 15-23-33 13-19-27 10-15-21 977 0.194 41 24-31-44 18-26-38 15-22-31 11-17-24 Performance notes appear at end of performance data 800 0.040 157 0.113 25 7-10-18 5-8-15 4-6-12 3-5-10 200 0.118 28 8-12-20 6-9-17 5-7-14 4-6-11 279 0.126 31 9-14-24 7-10-20 6-9-17 4-7-13 356 0.134 34 10-16-27 8-11-23 6-10-19 5-7-15 436 0.143 36 12-17-30 8-13-25 7-11-21 5-8-16 556 0.155 38 13-20-33 10-14-28 8-12-23 6-9-18 628 0.227 40 20-25-35 15-21-30 13-18-25 10-14-19 800 0.236 42 23-28-40 17-24-34 14-20-28 11-16-22 855 0.239 43 24-29-41 18-25-35 15-20-29 11-16-23 1117 0.253 45 27-33-47 20-28-40 17-23-33 13-18-26 1000 0.062 196 0.177 32 9-13-20 6-10-17 5-8-14 4-6-11 250 0.184 35 10-15-22 7-11-19 6-9-16 5-7-12 349 0.197 38 12-17-26 8-13-22 7-11-18 5-8-15 444 0.210 41 13-20-30 10-14-25 8-12-21 6-9-16 545 0.223 43 15-22-33 11-16-28 9-13-23 7-10-18 694 0.243 45 16-25-37 12-18-32 10-15-26 8-12-20 785 0.355 47 23-28-40 19-24-34 16-20-28 12-15-22 1000 0.369 49 26-32-45 21-27-38 18-22-31 14-17-25 1069 0.374 50 27-33-46 22-28-39 19-23-32 14-18-25 1396 0.396 53 31-37-53 25-32-45 21-26-37 16-21-29 1200 0.090 236 0.255 38 10-15-22 8-11-18 6-10-15 5-7-12 300 0.265 41 12-17-24 9-13-21 7-11-17 6-8-13 419 0.284 44 14-20-29 10-15-25 9-13-20 7-10-16 533 0.302 47 16-23-33 11-17-28 10-15-23 7-11-18 654 0.321 49 17-26-36 13-19-31 11-16-25 8-12-20 833 0.349 51 20-29-41 14-21-35 12-18-29 9-14-22 942 0.510 52 25-31-43 21-26-37 18-21-30 14-17-24 1200 0.531 55 28-35-49 24-29-42 20-24-34 16-19-27 1283 0.538 56 29-36-51 25-30-43 20-25-35 16-20-28 1676 0.570 58 33-41-58 28-35-49 23-29-41 18-23-32 1400 0.122 275 0.347 43 12-17-23 9-13-20 8-11-16 6-9-13 350 0.360 45 14-19-26 10-15-22 9-13-19 7-10-15 489 0.386 49 16-22-31 12-18-27 10-15-22 8-12-17 622 0.411 51 18-25-35 13-20-30 11-17-25 9-13-19 764 0.437 54 20-28-39 15-22-33 13-19-27 10-14-21 972 0.476 56 23-31-44 17-25-37 14-21-31 11-16-24 1100 0.695 57 27-33-47 23-28-40 19-23-33 15-18-26 1400 0.723 60 31-37-53 26-32-45 21-26-37 17-21-29 1497 0.733 60 32-39-55 27-33-47 22-27-38 17-21-30 1955 0.776 63 36-44-63 31-38-53 25-31-44 20-24-34 F PERFORMANCE DATA 12 x 12 Neck Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Redefine your comfort zone. ™ | www.titus-hvac.com PAS FLUSH FACE / SUPPLY / STEEL / ADJUSTABLE F85 diffusers PDS DROP FACE / SUPPLY / STEEL / ADJUSTABLE 6" Dia. 12 x 12 Module Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA 6 x 6 Neck F 24 x 12 Module 6" Dia. 6 x 6 Neck 6" Dia. F86 F86 16 x 16 Module PERFORMANCE DATA 6 x 6 Neck 8" Dia. 8 x 8 Neck 10" Dia. Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw 300 0.006 59 0.014 1-2-7 1-2-5 1-2-5 1-2-3 75 0.015 1-2-8 1-2-6 1-3-5 1-2-4 59 0.014 1-2-7 1-2-5 1-2-5 1-2-3 75 0.015 1-2-8 1-2-6 1-3-5 1-2-4 59 0.014 1-2-8 1-2-6 1-2-5 1-2-4 75 0.015 1-3-9 1-3-6 1-3-5 1-2-4 105 0.016 1-3-10 1-3-8 2-3-6 1-2-5 133 0.017 2-4-12 2-4-9 2-4-7 1-3-6 164 0.018 2-4-13 2-4-10 2-4-8 1-3-6 400 0.010 79 0.025 2-4-10 2-4-7 2-3-6 1-2-5 100 0.026 2-4-11 2-4-8 2-3-7 1-3-5 79 0.025 2-4-10 2-4-7 2-3-6 1-2-5 100 0.026 2-4-11 2-4-8 2-3-7 1-3-5 79 0.025 2-4-10 2-4-8 2-3-6 2-2-5 100 0.026 2-5-12 2-4-9 2-4-7 2-3-6 140 0.028 3-6-14 3-5-10 3-4-9 2-3-7 178 0.030 3-7-16 3-6-11 3-5-10 2-4-7 218 0.032 3-7-17 3-6-13 4-5-11 3-4-8 500 0.016 98 0.039 2-6-12 2-4-9 3-4-8 2-3-6 125 0.041 3-6-14 3-5-10 3-4-9 2-3-7 98 0.039 2-6-12 2-4-9 3-4-8 2-3-6 125 0.041 3-6-14 3-5-10 3-4-9 2-3-7 98 0.039 3-7-12 3-5-10 3-4-8 2-3-6 125 0.041 3-7-14 3-5-11 3-5-9 2-3-7 175 0.044 13 4-9-16 4-6-13 4-5-10 3-4-8 222 0.047 16 5-10-18 5-7-14 4-6-12 3-5-9 273 0.051 18 5-11-20 5-8-16 4-7-13 3-5-10 600 0.022 118 0.056 13 4-7-13 4-5-11 3-5-9 2-3-7 150 0.059 16 4-8-15 4-6-12 3-5-10 3-4-8 118 0.056 13 4-7-13 4-5-11 3-5-9 2-3-7 150 0.059 16 4-8-15 4-6-12 3-5-10 3-4-8 118 0.056 13 4-8-13 4-6-11 3-5-9 2-4-7 150 0.059 16 5-9-15 4-6-13 4-5-10 3-4-8 209 0.064 19 6-10-18 5-8-15 4-6-11 3-5-9 267 0.068 22 7-12-20 6-9-17 5-7-13 4-6-11 327 0.073 24 7-13-22 6-10-19 5-8-14 4-6-12 700 0.031 137 0.077 18 5-9-14 4-6-12 4-5-9 3-4-8 175 0.080 21 5-10-16 5-7-14 4-6-10 3-5-9 137 0.077 18 5-9-14 4-6-12 4-5-9 3-4-8 175 0.080 21 5-10-16 5-7-14 4-6-10 3-5-9 137 0.077 18 6-9-14 4-7-13 4-6-9 3-4-8 175 0.080 21 7-10-16 5-8-14 4-6-10 3-5-9 244 0.087 24 8-12-19 6-9-17 5-8-12 4-6-10 311 0.093 27 9-14-21 7-10-19 6-9-14 4-7-11 382 0.099 29 10-15-24 7-11-21 6-9-15 5-7-13 Performance notes appear at end of performance data 800 0.040 157 0.100 22 6-10-15 5-7-13 4-6-10 3-5-8 200 0.105 25 7-11-17 5-8-15 5-7-11 3-5-9 157 0.100 22 6-10-15 5-7-13 4-6-10 3-5-8 200 0.105 25 7-11-17 5-8-15 5-7-11 3-5-9 157 0.100 22 7-10-15 5-8-13 4-6-10 3-5-8 200 0.105 25 8-12-17 6-9-15 5-7-11 4-6-9 279 0.113 28 9-14-20 7-10-18 6-9-13 4-7-11 356 0.121 31 10-16-23 8-11-20 6-10-15 5-7-12 436 0.130 33 12-17-25 8-13-22 7-11-17 5-8-14 1000 0.062 196 0.157 30 8-12-17 6-9-15 5-8-11 4-6-9 250 0.164 32 9-14-19 7-10-17 6-9-13 4-7-10 196 0.157 30 8-12-17 6-9-15 5-8-11 4-6-9 250 0.164 32 9-14-19 7-10-17 6-9-13 4-7-10 196 0.157 30 9-12-17 6-10-15 5-8-11 4-6-9 250 0.164 32 10-14-19 7-11-17 6-9-13 5-7-10 349 0.177 35 12-16-23 8-13-20 7-10-15 5-8-12 444 0.190 38 13-18-26 10-14-23 8-12-17 6-9-14 545 0.203 40 15-20-28 11-16-25 9-13-18 7-10-15 1200 0.090 236 0.226 35 10-13-19 7-11-16 6-9-12 5-7-10 300 0.236 38 11-15-21 8-12-19 7-10-14 5-8-11 236 0.226 35 10-13-19 7-11-16 6-9-12 5-7-10 300 0.236 38 11-15-21 8-12-19 7-10-14 5-8-11 236 0.226 35 10-13-19 8-11-16 6-9-12 5-7-10 300 0.236 38 12-15-21 9-13-19 7-10-14 6-8-11 419 0.255 41 14-18-25 10-15-22 9-11-16 7-9-13 533 0.273 44 16-20-28 11-17-25 10-13-18 7-11-15 654 0.292 46 17-22-31 13-19-27 11-14-20 8-12-17 1400 0.122 275 0.307 40 11-14-20 8-12-18 7-9-13 5-8-11 350 0.321 43 13-16-23 9-14-20 8-10-15 6-9-12 275 0.307 40 11-14-20 8-12-18 7-9-13 5-8-11 350 0.321 43 13-16-23 9-14-20 8-10-15 6-9-12 275 0.307 40 12-14-20 9-13-18 8-9-13 6-8-11 350 0.321 43 13-16-23 10-14-20 9-10-15 7-9-12 489 0.347 46 16-19-27 12-17-24 10-12-18 8-10-14 622 0.372 49 18-21-30 13-19-27 11-14-20 9-11-16 764 0.398 51 19-24-34 15-21-30 13-15-22 10-13-18 diffusers PERFORMANCE DATA 6" Dia. 6 x 6 Neck 8" Dia. 20 x 20 Module 8 x 8 Neck 10" Dia. 10 x 10 Neck 14" Dia. 300 0.006 59 0.014 1-2-8 1-2-6 1-2-5 1-2-4 75 0.015 1-3-9 1-3-6 1-3-5 1-2-4 105 0.016 1-3-10 1-3-8 2-3-6 1-2-5 133 0.017 2-4-12 2-4-9 2-4-7 1-3-6 164 0.018 2-4-13 2-4-10 2-4-8 1-3-6 208 0.020 2-5-15 2-5-11 2-5-9 2-3-7 236 0.027 7-12-19 6-8-16 5-7-12 4-6-10 321 0.029 8-14-22 7-10-19 6-8-14 4-6-12 400 0.010 79 0.025 2-4-10 2-4-8 2-3-6 2-2-5 100 0.026 2-5-12 2-4-9 2-4-7 2-3-6 140 0.028 3-6-14 3-5-10 3-4-9 2-3-7 178 0.030 3-7-16 3-6-11 3-5-10 2-4-7 218 0.032 3-7-17 3-6-13 4-5-11 3-4-8 278 0.036 13 4-8-20 4-7-14 4-6-12 3-5-9 314 0.048 15 10-15-22 8-11-19 6-10-14 5-7-12 428 0.052 18 12-18-25 9-13-22 7-11-16 6-9-13 500 0.016 98 0.039 3-7-12 3-5-10 3-4-8 2-3-6 125 0.041 3-7-14 3-5-11 3-5-9 2-3-7 175 0.044 13 4-9-16 4-6-13 4-5-10 3-4-8 222 0.047 16 5-10-18 5-7-14 4-6-12 3-5-9 273 0.051 18 5-11-20 5-8-16 4-7-13 3-5-10 347 0.056 21 6-12-23 6-9-18 5-8-15 4-6-12 393 0.076 22 13-17-24 9-14-21 8-11-16 6-9-13 535 0.081 25 15-20-28 11-17-25 9-13-18 7-11-15 600 0.022 118 0.056 13 4-8-13 4-6-11 3-5-9 2-4-7 150 0.059 16 5-9-15 4-6-13 4-5-10 3-4-8 209 0.064 19 6-10-18 5-8-15 4-6-11 3-5-9 267 0.068 22 7-12-20 6-9-17 5-7-13 4-6-11 327 0.073 24 7-13-22 6-10-19 5-8-14 4-6-12 417 0.080 26 8-15-25 7-11-21 6-9-16 5-7-13 471 0.109 28 15-19-26 11-16-23 10-12-17 7-10-14 641 0.116 31 18-22-31 13-19-27 11-14-20 9-12-16 700 0.031 137 0.077 18 6-9-14 4-7-13 4-6-9 3-4-8 175 0.080 21 7-10-16 5-8-14 4-6-10 3-5-9 244 0.087 24 8-12-19 6-9-17 5-8-12 4-6-10 311 0.093 27 9-14-21 7-10-19 6-9-14 4-7-11 382 0.099 29 10-15-24 7-11-21 6-9-15 5-7-13 486 0.109 31 11-17-27 8-13-24 7-11-17 5-8-14 550 0.148 33 16-20-29 13-18-25 11-13-19 9-11-15 748 0.158 36 19-24-33 15-21-29 13-15-22 10-13-18 Performance notes appear at end of performance data 800 0.040 157 0.100 22 7-10-15 5-8-13 4-6-10 3-5-8 200 0.105 25 8-12-17 6-9-15 5-7-11 4-6-9 279 0.113 28 9-14-20 7-10-18 6-9-13 4-7-11 356 0.121 31 10-16-23 8-11-20 6-10-15 5-7-12 436 0.130 33 12-17-25 8-13-22 7-11-17 5-8-14 556 0.143 35 13-20-29 10-14-25 8-12-19 6-9-15 628 0.194 37 18-22-30 15-19-27 11-14-20 9-12-16 855 0.206 40 21-25-36 18-22-31 13-16-23 11-13-19 1000 0.062 196 0.157 30 9-12-17 6-10-15 5-8-11 4-6-9 250 0.164 32 10-14-19 7-11-17 6-9-13 5-7-10 349 0.177 35 12-16-23 8-13-20 7-10-15 5-8-12 444 0.190 38 13-18-26 10-14-23 8-12-17 6-9-14 545 0.203 40 15-20-28 11-16-25 9-13-18 7-10-15 694 0.223 43 16-23-32 12-18-28 10-15-21 8-12-17 785 0.303 44 20-24-34 17-21-30 13-16-22 11-13-18 1069 0.322 47 23-28-40 20-25-35 15-18-26 12-15-21 1200 0.090 236 0.226 35 10-13-19 8-11-16 6-9-12 5-7-10 300 0.236 38 12-15-21 9-13-19 7-10-14 6-8-11 419 0.255 41 14-18-25 10-15-22 9-11-16 7-9-13 533 0.273 44 16-20-28 11-17-25 10-13-18 7-11-15 654 0.292 46 17-22-31 13-19-27 11-14-20 8-12-17 833 0.321 48 20-25-35 14-21-31 12-16-23 9-13-19 942 0.436 50 22-26-37 19-23-33 14-17-24 12-14-20 1283 0.464 53 25-31-44 22-27-38 16-20-28 13-16-23 1400 0.122 275 0.307 40 12-14-20 9-13-18 8-9-13 6-8-11 350 0.321 43 13-16-23 10-14-20 9-10-15 7-9-12 489 0.347 46 16-19-27 12-17-24 10-12-18 8-10-14 622 0.372 49 18-21-30 13-19-27 11-14-20 9-11-16 764 0.398 51 19-24-34 15-21-30 13-15-22 10-13-18 972 0.437 53 22-27-38 17-24-34 14-17-25 11-14-20 1100 0.593 55 23-29-40 21-25-36 15-19-26 12-15-22 1497 0.631 58 27-33-47 24-29-42 18-22-31 15-18-25 F PERFORMANCE DATA 12" Dia. Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC ( Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Redefine your comfort zone. ™ | www.titus-hvac.com PDS DROP FACE / SUPPLY / STEEL / ADJUSTABLE F87 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PDS DROP FACE / SUPPLY / STEEL / ADJUSTABLE 6" Dia. 6 x 6 Neck 8" Dia. F 8 x 8 Neck 24 x 24 Module 10" Dia. 10 x 10 Neck PERFORMANCE DATA 12" Dia. 12 x 12 Neck 14" Dia. 16" Dia. F88 F88 Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw 300 0.006 59 0.014 1-2-8 1-2-6 1-2-5 1-2-4 75 0.015 1-3-9 1-3-6 1-3-5 1-2-4 105 0.016 1-3-10 1-3-8 2-3-6 1-2-5 133 0.017 2-4-12 2-4-9 2-4-7 1-3-6 164 0.018 2-4-13 2-4-10 2-4-8 1-3-6 208 0.020 2-5-15 2-5-11 2-5-9 2-3-7 236 0.027 7-12-19 6-8-16 5-7-12 4-6-10 300 0.029 8-13-21 6-10-19 5-8-14 4-6-11 321 0.029 8-14-22 7-10-19 6-8-14 4-6-12 419 0.031 12 10-16-25 8-11-22 6-10-16 5-7-13 400 0.010 79 0.025 2-4-10 2-4-8 2-3-6 2-2-5 100 0.026 2-5-12 2-4-9 2-4-7 2-3-6 140 0.028 3-6-14 3-5-10 3-4-9 2-3-7 178 0.030 3-7-16 3-6-11 3-5-10 2-4-7 218 0.032 3-7-17 3-6-13 4-5-11 3-4-8 278 0.036 13 4-8-20 4-7-14 4-6-12 3-5-9 314 0.048 15 10-15-22 8-11-19 6-10-14 5-7-12 400 0.051 17 12-17-24 9-13-21 7-11-16 6-8-13 428 0.052 18 12-18-25 9-13-22 7-11-16 6-9-13 559 0.055 21 14-20-29 10-15-25 9-13-19 7-10-15 500 0.016 98 0.039 3-7-12 3-5-10 3-4-8 2-3-6 125 0.041 3-7-14 3-5-11 3-5-9 2-3-7 175 0.044 13 4-9-16 4-6-13 4-5-10 3-4-8 222 0.047 16 5-10-18 5-7-14 4-6-12 3-5-9 273 0.051 18 5-11-20 5-8-16 4-7-13 3-5-10 347 0.056 21 6-12-23 6-9-18 5-8-15 4-6-12 393 0.076 22 13-17-24 9-14-21 8-11-16 6-9-13 500 0.079 24 15-19-27 11-16-24 9-13-18 7-10-15 535 0.081 25 15-20-28 11-17-25 9-13-18 7-11-15 698 0.086 28 17-23-32 13-19-28 11-15-21 8-12-17 600 0.022 118 0.056 13 4-8-13 4-6-11 3-5-9 2-4-7 150 0.059 16 5-9-15 4-6-13 4-5-10 3-4-8 209 0.064 19 6-10-18 5-8-15 4-6-11 3-5-9 267 0.068 22 7-12-20 6-9-17 5-7-13 4-6-11 327 0.073 24 7-13-22 6-10-19 5-8-14 4-6-12 417 0.080 26 8-15-25 7-11-21 6-9-16 5-7-13 471 0.109 28 15-19-26 11-16-23 10-12-17 7-10-14 600 0.114 30 17-21-30 13-19-26 11-14-19 8-11-16 641 0.116 31 18-22-31 13-19-27 11-14-20 9-12-16 838 0.124 34 20-25-35 15-22-31 13-16-23 10-13-19 700 0.031 137 0.077 18 6-9-14 4-7-13 4-6-9 3-4-8 175 0.080 21 7-10-16 5-8-14 4-6-10 3-5-9 244 0.087 24 8-12-19 6-9-17 5-8-12 4-6-10 311 0.093 27 9-14-21 7-10-19 6-9-14 4-7-11 382 0.099 29 10-15-24 7-11-21 6-9-15 5-7-13 486 0.109 31 11-17-27 8-13-24 7-11-17 5-8-14 550 0.148 33 16-20-29 13-18-25 11-13-19 9-11-15 700 0.156 35 19-23-32 15-20-28 12-15-21 10-12-17 748 0.158 36 19-24-33 15-21-29 13-15-22 10-13-18 977 0.169 38 22-27-38 18-24-34 14-18-25 11-14-20 Performance notes appear at end of performance data 800 0.040 157 0.100 22 7-10-15 5-8-13 4-6-10 3-5-8 200 0.105 25 8-12-17 6-9-15 5-7-11 4-6-9 279 0.113 28 9-14-20 7-10-18 6-9-13 4-7-11 356 0.121 31 10-16-23 8-11-20 6-10-15 5-7-12 436 0.130 33 12-17-25 8-13-22 7-11-17 5-8-14 556 0.143 35 13-20-29 10-14-25 8-12-19 6-9-15 628 0.194 37 18-22-30 15-19-27 11-14-20 9-12-16 800 0.203 39 20-24-34 17-21-30 13-16-22 11-13-18 855 0.206 40 21-25-36 18-22-31 13-16-23 11-13-19 1117 0.220 43 23-29-41 20-25-36 15-19-26 13-15-22 1000 0.062 196 0.157 30 9-12-17 6-10-15 5-8-11 4-6-9 250 0.164 32 10-14-19 7-11-17 6-9-13 5-7-10 349 0.177 35 12-16-23 8-13-20 7-10-15 5-8-12 444 0.190 38 13-18-26 10-14-23 8-12-17 6-9-14 545 0.203 40 15-20-28 11-16-25 9-13-18 7-10-15 694 0.223 43 16-23-32 12-18-28 10-15-21 8-12-17 785 0.303 44 20-24-34 17-21-30 13-16-22 11-13-18 1000 0.317 46 22-27-38 20-24-34 14-18-25 12-15-21 1069 0.322 47 23-28-40 20-25-35 15-18-26 12-15-21 1396 0.344 50 26-32-45 23-28-40 17-21-30 14-17-24 1200 0.090 236 0.226 35 10-13-19 8-11-16 6-9-12 5-7-10 300 0.236 38 12-15-21 9-13-19 7-10-14 6-8-11 419 0.255 41 14-18-25 10-15-22 9-11-16 7-9-13 533 0.273 44 16-20-28 11-17-25 10-13-18 7-11-15 654 0.292 46 17-22-31 13-19-27 11-14-20 8-12-17 833 0.321 48 20-25-35 14-21-31 12-16-23 9-13-19 942 0.436 50 22-26-37 19-23-33 14-17-24 12-14-20 1200 0.457 52 24-30-42 21-26-37 16-19-27 13-16-23 1283 0.464 53 25-31-44 22-27-38 16-20-28 13-16-23 1676 0.496 56 29-35-50 25-31-44 19-23-32 15-19-27 1400 0.122 275 0.307 40 12-14-20 9-13-18 8-9-13 6-8-11 350 0.321 43 13-16-23 10-14-20 9-10-15 7-9-12 489 0.347 46 16-19-27 12-17-24 10-12-18 8-10-14 622 0.372 49 18-21-30 13-19-27 11-14-20 9-11-16 764 0.398 51 19-24-34 15-21-30 13-15-22 10-13-18 972 0.437 53 22-27-38 17-24-34 14-17-25 11-14-20 1100 0.593 55 23-29-40 21-25-36 15-19-26 12-15-22 1400 0.622 57 26-32-46 23-28-40 17-21-30 14-17-24 1497 0.631 58 27-33-47 24-29-42 18-22-31 15-18-25 1955 0.675 60 31-38-54 27-34-48 20-25-35 17-20-29 diffusers PERFORMANCE DATA • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure PAR, PXP, PMR, PXP-DR, PDR PERFORMANCE DATA PAR, PXP, PMR - FLUSH FACE - RETURN; PXP-DR, PDR - DROP FACE - RETURN Neck Size 12 x 12 Face 6 Dia. * 6 x 6 Neck * 10 x 10 Neck Neck Size 6 Dia. * 6 x 6 Neck * 8 Dia. * 8 x 8 Neck * 10 Dia.* 24 x 24 Face 10 x 10 Neck * 12 Dia. * 12 x 12 Neck * 14 Dia. * 15 x 15 Neck * 16 Dia. * 18 x 18 Neck * Neck Size Other Sizes 10 x 22 (12 x 24 Face) 14 x 14 (16 x 16 Face) 18 x 18 (20 x 20 Face) 22 x 46 (24 x 48 Face) 300 0.01 0.03 59 75 208 15 300 0.01 0.03 59 75 105 133 164 208 235 300 320 469 419 11 675 11 1008 13 300 0.01 0.03 458 408 675 2108 12 400 0.01 0.06 78 100 278 23 400 0.01 0.06 78 100 140 178 218 278 11 314 12 400 14 427 15 625 16 558 18 900 18 1344 20 400 0.01 0.06 611 544 900 11 2811 20 500 0.02 0.09 98 125 12 347 29 500 0.02 0.09 98 125 174 13 222 14 273 16 347 17 392 17 500 20 534 21 781 22 698 24 1125 24 1681 26 500 0.02 0.09 764 681 12 1125 17 3514 25 600 0.02 0.13 118 14 150 17 417 33 600 0.02 0.13 118 13 150 14 209 17 267 18 327 20 417 21 471 22 600 24 641 25 938 26 837 28 1350 28 2017 30 600 0.02 0.13 917 14 817 17 1350 22 4217 30 700 0.03 0.17 137 18 175 21 486 37 700 0.03 0.18 137 17 175 18 244 21 311 22 382 24 486 25 549 26 700 28 748 29 1094 30 977 32 1575 32 2353 34 700 0.03 0.17 1069 18 953 21 1575 26 4919 34 800 0.04 0.23 157 21 200 24 556 41 800 0.04 0.24 157 20 200 21 279 24 356 25 436 27 556 28 628 29 800 31 855 32 1250 33 1116 35 1800 36 2689 37 800 0.04 0.23 1222 21 1089 24 1800 29 5622 38 1000 0.06 0.36 196 27 250 30 694 47 1000 0.06 0.37 196 26 250 27 349 30 444 31 545 33 694 34 785 34 1000 37 1068 38 1563 39 1395 41 2250 41 3361 43 1000 0.06 0.36 1528 27 1361 30 2250 35 7028 43 1200 0.09 0.51 235 32 300 35 833 51 1200 0.09 0.54 235 31 300 32 419 35 533 36 654 38 833 39 942 39 1200 42 1282 43 1875 44 1674 46 2700 46 4033 47 1200 0.09 0.51 1833 32 1633 35 2700 40 8433 48 1400 0.12 0.70 275 36 350 39 972 55 1400 0.12 0.73 275 34 350 35 488 38 622 39 763 41 972 42 1099 43 1400 45 1495 46 2188 47 1953 49 3150 49 4706 51 1400 0.12 0.70 2139 36 1906 39 3150 44 9839 52 PAR, PXP, PMR, PXP-DR, PDR PERFORMANCE NOTES • Supply unit with deflectors removed • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006 • Noise Criteria (NC) based on a room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006 • These products have been tested per ANSI/ASHRAE Standard 702006. Actual performance, with flexible duct inlet, may vary in the field. • See the section, Engineering Guidelines for additional information F PERFORMANCE DATA 22 x 22 Neck Neck Vel, fpm Vp, in. Wg Ps (-), in. Wg Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Neck Vel, fpm Vp, in. Wg Ps (-), in. Wg Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Neck Vel, fpm Vp, in. Wg Ps (-), in. Wg Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Flow Rate, cfm Room NC Redefine your comfort zone. ™ | www.titus-hvac.com • Data obtained from tests conducted in accordance with ANSI / ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions • For an explanation of catalog throw data, see the section, Engineering Guidelines F89 Redefine your comfort zone. ™ | www.titus-hvac.com Perforated Ceiling Diffusers (continued) diffusers PXP / PXP-DF / PXP-AA • Model PXP Series perforated panels are designed for return or exhaust applications • Panels match Models PAS, PDS, and PAS-AA supply diffusers in appearance after installation • Installed by laying between T-bars • Perforated panel has 3/16" diameter holes on ¼" staggered centers • Material is heavy gauge steel or aluminum • MRI compatible (PXP-AA) PXP / PXP-DF / PXP-AA F MRI compatible AVAILABLE MODELS: Steel Models: PXP / Return Panel / Flush Face PXP-DF / Return Panel / Drop Face Aluminum Model: PXP-AA / Return Panel / Flush Face FINISH Standard Finish - #26 White PXP / PXP-DF / PXP-AA OVERVIEW F90 F90 Return Panels Model PXP Series perforated panels are designed for return or exhaust applications. Panels match Models PAS, PDS, and PAS-AA supply diffusers in appearance after installation. For Performance Data and notes, please refer to the PAR, PXP, PMR, PXP-DR, PDR table on page F89. See website for Specifications diffusers DIMENSIONS Model PXP and PXP-AA (Lay-In) ½" Redefine your comfort zone. ™ | www.titus-hvac.com PXP / PXP-DF / PXP-AA UNIT DIMENSIONS Celing Module minus ¼" Celing Module Size F Ceiling Module Sizes Available: 12 x 12, 16 x 16, 20 x 20, 24 x 12, 24 x 24, 48 x 24 Model PXP-DF (Lay-In or Tegular) (Lay-In shown) 3/8" Celing Module minus ¼" Celing Module Size All dimensions are in inches DIMENSIONS Ceiling Module Sizes Available: 12 x 12, 16 x 16, 20 x 20, 24 x 12, 24 x 24, 48 x 24 F91 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Perforated Ceiling Diffusers (continued) PSS / PSS-DF / PSS-AA • Titus Series PSS perforated star diffusers generate a high induction air pattern that maximizes throw • PSS diffusers deliver a horizontal blanket of air that adheres to the ceiling even at varying volumes. An excellent choice for VAV systems. • Deflector is mounted directly under the neck of the diffuser to generate the long-throw star pattern • Pressure drop and noise levels are lower than typical curved blade perforated diffusers • Vertical air pattern can be obtained by turning all deflector blades inward • Three-way pattern or corner blow can be field adjusted with no increase in pressure drop or sound level PSS / PSS-DF / PSS-AA • Available with either side blow or corner blow. Side blow maximizes throw. Corner blow maximizes wall surface coverage in a perimeter installation. F AVAILABLE MODELS: Steel Models: PSS / Flush Face PSS-DF / Drop Face Aluminum Model: PSS-AA / Flush Face See website for Specifications FIELD ADJUSTMENTS FINISH Standard Finish - #26 White PSS / PSS-DF / PSS-AA OVERVIEW F92 F92 Star Pattern / Adjustable Pattern can be changed from side blow to corner blow and vice versa by removing four screws, rotating deflector 45 degrees, and replacing screws. Titus Series PSS perforated star diffusers generate a high induction air pattern that maximizes throw. The deflector is mounted directly under the neck of the diffuser to generate the long-throw star pattern. As a result, pressure drop and noise levels are lower than typical curved blade perforated diffusers. ADDITIONAL FEATURES • Can be changed to either side blow or corner blow in the field • Round neck with deep collar for easy connection to flexible duct • Perforated face is hinged to allow access to the star deflector. The optional damper is adjustable after removal of the star deflector. • Perforated face has 3/16" holes on ¼" staggered centers • Material is heavy gauge steel backpan with steel or aluminum perforated face, according to the model selected • Optional factory-installed R-6 foil-backed insulation available for 24 x 24" full face models, neck sizes 6-16, borders 1, 2, 3 and 4 A Section A-A A Front Back Blades Blades Back blades can be redirected to produce directional adjustment pattern as shown above. diffusers DIMENSIONS Redefine your comfort zone. ™ | www.titus-hvac.com PSS / PSS-DF / PSS-AA UNIT DIMENSIONS Models PSS and PSS-AA Border Type 3 (Lay-ln) Nominal Duct Size D D minus 1/8" Star Deflector 3" Ceiling Module minus ¼" Ceiling Module Size Models PSS-DF Border Type 3 (Lay-ln or Tegular) (Lay-In shown) F Nominal Duct Size D D minus 1/8" Star Deflector 3" 3/8" Ceiling Module minus ¼" Ceiling Module Size DIMENSIONS All dimensions are in inches F93 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS BORDER TYPES • All of these border types can be furnished with both the 12 x 12" and 24 x 24" face or ceiling module size • The table below indicates the round and square neck sizes that can be selected Border Type 1 (Surface Mount) Module Size minus 1" Border Type 2 (Snap-In) 1" Border ¼" Ceiling Opening = Module Size Module Size plus 1" Ceiling Module Size minus 1/16" AVAILABLE SIZES Nominal Duct Size D 6x6 F MODELS PSS, PSS-AA In addition to Border Type 3 (lay-in), as dimensioned on the preceding page, Series PSS diffusers are also available in border types to fit the various ceiling systems shown here. Face or Ceiling Module Size 12 x 12 24 x 24 ● ● 8x8 ● 10 x 10 ● 12 x 12 ● 6” Dia. ● ● Border Type 4 (Spline) Ceiling Module Size minus 1/16" Ceiling Module Size minus 1/16" Note: 4SL can be installed after ceiling tiles are in place 8” Dia. ● 10” Dia. ● 12” Dia. ● MODEL PSS-DF 14” Dia. ● 16” Dia. ● Border Type 1 (Surface Mount) ● Indicates available size. Not all sizes Border Type 4SL (Spline Side Lock) Module Size minus 1" Border Type 2 (Snap-In) 1" Border available in all duct sizes. ¼" ⅜" ⅜" Ceiling Module Size minus 1/16" Ceiling Opening = Module Size Module Size plus 1" DIMENSIONS Border Type 4 (Spline) F94 F94 Optional Molded Insulation Blanket Insulation is R-6 where blanket has the most depth. One" clearance on each side of neck is left for insulated duct connection. 24 x 24" fmodule size only. Blanket is factory installed. Border Type 4SL (Spline Side Lock) ⅜" Ceiling Module Size minus 1/16" All dimensions are in inches ⅜" Ceiling Module Size minus 1/16" Note: 4SL can be installed after ceiling tiles are in place diffusers DISCHARGE PATTERNS Side Blow Corner Blow Field Adjusted Plan View Plan View Plan View Factory Set, 4 Way Factory Set, 4 Way Not available with 12 x 12 neck size Back blades can be redirected to produce directional adjustment pattern as shown above EXTERIOR ZONE APPLICATIONS ILLUSTRATING WALL EFFECT Ceiling Ceiling Ceiling Elevation Elevation Elevation Wall Side blow gives maximum throw. Wall Wall Corner blow gives maximum spread. Plan View Redefine your comfort zone. ™ | www.titus-hvac.com AVAILABLE DISCHARGE PATTERNS Plan View Corner blow with directional adjustment gives Plan maximum wall View coverage. F INTERIOR ZONE APPLICATIONS Plan View Plan View Corner blow with directional adjustment blows away from walls to avoid drafts. Corner blow with directional adjustment fills corner. TYPICAL DISCHARGE PATTERN - ELEVATION Ceiling Airflow PSS Ceiling Airflow PSS projects a tight blanket of air that adheres to the ceiling, even at low air volumes. Guards against smudging. Excellent VAV performance. DISCHARGE PATTERNS Alternating side blow and corner blow settings allow diffusers to be closely spaced without creating down drafts that would otherwise result from two airstreams colliding head-on F95 diffusers PSS / ADJUSTABLE / SIDE AND CORNER BLOW PATTERN 12 x 12 Module Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA 6" Dia. 6 x 6 Neck 6" Dia. 6 x 6 Neck 8" Dia. 24 x 24 Module F 8 x 8 Neck 10" Dia. 10 x 10 Neck 12" Dia. 12 x 12 Neck PERFORMANCE DATA 14" Dia. F96 F96 16" Dia. Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw 300 0.006 59 0.022 1-2-5 75 0.024 2-3-6 59 0.016 1-2-5 75 0.017 2-3-6 105 0.018 2-4-7 133 0.019 3-4-9 164 0.020 3-5-10 208 0.022 4-6-11 236 0.023 4-6-12 300 0.021 5-7-14 321 0.021 5-7-15 419 0.021 6-8-17 400 0.010 79 0.039 2-3-6 100 0.043 3-4-8 79 0.029 2-3-6 100 0.030 3-4-8 140 0.032 11 3-5-10 178 0.034 12 4-6-11 218 0.036 13 4-6-12 278 0.039 14 5-8-14 314 0.041 15 5-8-15 400 0.036 16 6-9-17 428 0.037 16 6-10-17 559 0.038 17 7-11-20 500 0.016 98 0.060 16 3-4-8 125 0.067 17 3-5-9 98 0.045 16 3-4-8 125 0.047 17 3-5-9 175 0.050 19 4-6-11 222 0.053 20 5-7-12 273 0.056 20 5-8-14 347 0.061 21 6-9-15 393 0.064 22 7-10-16 500 0.057 23 8-12-18 535 0.057 23 8-12-19 698 0.059 24 9-14-22 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB 600 0.022 118 0.087 22 3-5-9 150 0.097 23 4-6-10 118 0.065 22 3-5-9 150 0.067 23 4-6-10 209 0.072 25 5-7-12 267 0.076 26 6-9-14 327 0.081 26 6-10-15 417 0.088 27 8-11-17 471 0.093 28 8-12-18 600 0.082 29 9-14-20 641 0.083 29 10-15-21 838 0.085 30 11-17-24 700 0.031 137 0.118 27 4-6-10 175 0.131 28 5-7-11 137 0.088 27 4-6-10 175 0.091 28 5-7-11 244 0.098 30 6-9-13 311 0.104 31 7-10-15 382 0.111 32 8-11-16 486 0.120 33 9-13-18 550 0.126 33 9-14-19 700 0.112 34 11-15-22 748 0.112 34 11-16-23 977 0.115 35 13-18-26 800 0.040 157 0.154 32 4-6-10 200 0.172 33 5-8-12 157 0.115 32 4-6-10 200 0.119 33 5-8-12 279 0.128 34 6-10-14 356 0.136 35 8-11-16 436 0.145 36 9-12-17 556 0.157 37 10-14-20 628 0.165 37 11-15-21 800 0.146 38 12-17-23 855 0.147 39 13-17-24 1117 0.151 40 15-20-28 1000 0.062 196 0.241 39 5-8-12 250 0.268 40 6-9-13 196 0.180 39 5-8-12 250 0.187 40 6-9-13 349 0.200 41 8-11-15 444 0.212 42 9-12-17 545 0.226 43 11-14-19 694 0.246 44 13-15-22 785 0.258 45 13-16-23 1000 0.228 46 15-18-26 1069 0.229 46 16-19-27 1396 0.235 47 18-22-31 1200 0.090 236 0.347 45 6-9-13 300 0.386 46 8-10-14 236 0.258 45 6-9-13 300 0.269 46 8-10-14 419 0.288 48 10-12-17 533 0.306 49 11-14-19 654 0.325 49 12-15-21 833 0.354 50 14-17-24 942 0.371 51 15-18-25 1200 0.328 52 17-20-29 1283 0.330 52 17-21-30 1676 0.339 53 20-24-34 1400 0.122 275 0.473 50 8-10-14 350 0.525 51 9-11-15 275 0.352 50 8-10-14 350 0.366 51 9-11-15 489 0.392 53 11-13-18 622 0.416 54 12-15-21 764 0.443 54 13-16-23 972 0.481 55 15-18-26 1100 0.505 56 16-19-27 1400 0.447 57 18-22-31 1497 0.449 57 18-23-32 1955 0.461 58 21-26-37 • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure Perforated Ceiling Diffusers (continued) diffusers • Titus Series PCS ceiling diffusers are designed for longer throws • Good performance in variable air volume systems • Discharge pattern can be adjusted from horizontal to vertical. Can be adjusted before or after installation. • Discharge pattern is adjusted by dropping the hinged, perforated face and moving the curved deflector blades (see the Removing Perforated Face and Adjusting Pattern Controllers diagram within this section) • Dropping the perforated face also gives access for adjusting the optional damper • Perforated face has 3/16" diameter holes on ¼" staggered centers • Round inlet collar is approximately 1½" deep for easy duct connection PCS / PCS-DF / PCS-AA Redefine your comfort zone. ™ | www.titus-hvac.com PCS / PCS-DF / PCS-AA • Material is heavy gauge steel backpan with steel or aluminum perforated face, according to the model selected AVAILABLE MODELS: See website for Specifications F Steel Models: PCS / Flush Face PCS-DF / Drop Face Aluminum Model: PCS-AA / Flush Face FINISH Standard Finish - #26 White OVERVIEW Titus Series PCS ceiling diffusers are designed for longer throws. Discharge patterns can be adjusted from either horizontal to vertical before or after installation. PCS / PCS-DF / PCS-AA Curved Blade - 1-, 2-, 3-, or 4-Way Deflectors F97 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS PCS / PCS-DF / PCS-AA UNIT DIMENSIONS Model PCS and PCS-AA Border Type 3 (Lay-In) 24"x24" Module Size Backpan Nominal Duct Size D D minus 1/8" 12"x12" Module Size Backpan B A Ceiling Module minus ¼" Ceiling Module Size F Model PCS-DF Border Type 3 (Lay-In or Tegular) (Lay-In shown) 24"x24" Module Size Backpan Nominal Duct Size D D minus 1/8" 12"x12" Module Size Backpan B A Ceiling Module minus ¼" 3/8" DIMENSIONS Ceiling Module Size F98 F98 Face or Ceiling Module Size 12 x 12 12 x 12 24 x 12 24 X 12 16 x 16 (note 1) 16 x 16 20 x 20 (note 1) 20 x 20 24 x 24 48 x 24 Neck Sizes 6, 8 6 x 6, 8 x 8 6, 8 6 x 6, 8 x 8, 18 x 6 6, 8, 10 6 x 6, 8 x 8, 10 x 10, 12 x 12 6, 8, 10, 12, 14 6 x 6, 8 x 8, 10 x 10, 12 x 12 6, 8 10, 12, 14, 15, 16, 6 x 6, 8 x 8, 10 x 10, 12 x 12, 14 x 14, 15 x 15, 16 x 16 6, 8, 10, 12, 14, 16, 6 x 6, 8 x 8, 10 x 10, 12 x 12, 16 x 16 Dimension A B 4 2 33/8 13/8 3½ 1½ 3½ 1½ 3½ 1½ 3½ 1½ 3½ 1½ 3½ 1½ 3¼ 1 3¾ 1½ 3½ 1½ Note 1: Module Size 16 x 16 and 20 x 20 are only available with Border Type 3 Note 2: Shaded neck sizes indicate the die-stamped backpan shown above is used. The square backpan is used for all other neck sizes. All dimensions are in inches diffusers DIMENSIONS Redefine your comfort zone. ™ | www.titus-hvac.com BORDER TYPES In addition to Border Type 3 (lay-in), as dimensioned on the preceding page, Series PCS diffusers are also available in border types to fit the various ceiling systems shown here • All of these border types can be furnished with both the 12 x 12" and 24 x 24" face or ceiling module size • The following tables indicate the round and square neck sizes that can be selected MODELS PCS / PCS-AA Border Type 1 (Surface Mount) Border Type 2 (Snap-In) 12"x12" Backpan Module Size minus 1" 1" Border 24"x24" Backpan ¼" F Ceiling Module Size minus 1/16" Ceiling Opening = Module Size Module Size plus 1" MODEL PCS-DF Border Type 1 (Surface Mount) Border Type 2 (Snap-In) 12"x12" Backpan Module Size minus 1" 1" Border 24"x24" Backpan (sizes 6", 8", 10", 12", 15"; Round & Square) ¼" 3 3 /8" Ceiling Opening = Module Size /8" Ceiling Module Size minus 1/16" Module Size plus 1" AVAILABLE SIZES PCS, PCS-DF, PCS-AA Square Backpan Module Size Inlet Size 12 x 12 ❏ ● 24 x 12 ● ● 16 x 16 ● ● ● ● 20 x 20 ● ● ● ● 24 x 24 ❏ ❏ ❏ ❏ ● ● ● 48 x 24 ● ● ● ● ● 6” Dia. 8” Dia. 10” Dia. 12” Dia. 14” Dia. 15” Dia. 16” Dia. ● ● Indicates available size. Not all sizes available in all border types ❏ Indicates aluminum (AA) available ●/❏ Shaded area indicates stamped, formed backpan size All dimensions are in inches 12 x 12 ❏ 24 x 12 ● 16 x 16 ● ● ● 20 x 20 ● ● ● ● ● 24 x 24 ❏ ❏ ❏ ❏ ❏ ● ❏ 48 x 24 ● ● ● ● ● DIMENSIONS 6x6 8x8 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 18 x 6 PCS, PCS-DF, PCS-AA Square Backpan Module Size Inlet Size F99 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com INSTALLATIONS F REMOVING PERFORATED FACE 1. Insert small screwdriver or other slim instrument to push latch inward from border 3. Face will now swing down with the other side hinging 2. Repeat on opposite side ADJUSTING PATTERN CONTROLLERS Round Neck - 4-Way Square Neck - 4-Way Tension wire holds blades in position after pattern has been adjusted. Individually adjustable curved blades. INSTALLATIONS The pattern deflector in the neck of the diffuser consists of individually adjustable blades. These blades vary the discharge pattern from full horizontal to vertical and also damper the air volume. F100 F100 1-Way The standard model PCS diffuser has a 4-way discharge pattern. Also available are the patterns below. 2-Way Opposite 2-Way Corner 3-Way diffusers PERFORMANCE DATA 12" x 12" Module Size 6" Neck 8" Neck 6" Neck 24" x 24" Module Size 8" Neck 10" Neck 12" Neck 14" Neck 300 0.006 59 0.014 1-1-5 1-2-8 1-2-8 1-3-9 105 0.020 1-2-7 1-3-11 1-3-11 1-3-12 59 0.008 0-1-4 1-1-6 1-2-8 1-2-9 105 0.011 1-1-6 1-2-7 1-3-11 1-3-12 164 0.015 1-2-7 1-2-9 1-3-13 2-4-15 236 0.018 1-2-8 1-3-11 2-4-16 2-4-18 321 11 0.022 1-2-10 1-3-13 2-5-19 2-5-21 419 12 0.026 1-3-11 2-4-15 2-5-21 3-6-24 400 0.010 78 0.025 1-2-7 2-4-11 2-4-12 2-4-12 140 0.036 1-3-9 2-5-14 2-5-16 3-6-17 79 12 0.015 1-2-7 1-2-9 2-4-11 2-4-13 140 14 0.020 1-2-9 1-3-11 2-5-14 2-5-18 218 15 0.027 1-3-11 2-4-14 3-6-18 3-7-22 314 16 0.032 2-4-13 2-5-17 3-7-21 4-8-27 428 17 0.039 2-4-15 3-6-20 4-8-25 4-9- 1 559 18 0.046 2-5-17 3-7-23 4-9-28 5-11-36 500 0.016 98 13 0.039 2-4-8 3-6-13 3-6-15 3-7-15 175 15 0.056 2-5-10 3-8-17 3-8-20 4-9-21 98 17 0.023 1-3-8 2-4-11 2-6-12 3-6-15 175 19 0.031 2-4-11 2-5-14 3-7-16 4-8-20 273 20 0.042 2-5-14 3-6-18 4-9-20 5-10-25 393 21 0.050 3-6-16 3-8-21 5-11-24 6-12-30 535 22 0.061 3-7-19 4-9-25 6-13-27 6-14-35 698 23 0.072 3-8-22 5-10-28 7-15-31 7-17-40 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB 600 0.022 118 19 0.056 2-5-8 4-8-14 4-8-17 4-9-18 209 21 0.081 3-7-11 5-11-19 5-11-23 6-12-25 118 21 0.034 2-4-9 2-6-12 4-8-13 4-9-16 209 23 0.045 2-6-12 3-7-16 5-11-17 5-12-22 327 24 0.061 3-7-15 4-9-19 6-13-21 7-15-27 471 25 0.072 4-8-18 5-11-23 7-16-26 8-18-33 641 26 0.088 4-10-21 6-13-27 8-19-30 9-21-38 838 27 0.103 5-11-25 7-15-31 9-21-34 11-24-44 700 0.031 137 25 0.076 3-6-9 5-9-15 5-11-18 6-11-20 244 26 0.110 5-8-12 7-12-21 7-14-24 8-14-27 137 24 0.046 3-6-10 3-7-13 5-10-14 5-12-18 244 26 0.061 3-8-13 5-10-17 6-13-19 7-16-24 382 27 0.082 4-9-17 6-12-21 8-16-23 9-20-30 550 29 0.098 5-11-20 7-15-25 10-20-28 11-24-35 748 29 0.119 6-13-23 8-17-29 11-23-32 13-28-41 977 30 0.141 7-15-27 9-20-34 13-26-37 14-31-47 800 0.040 157 29 0.100 4-7-10 7-11-16 7-12-19 8-12-21 279 30 0.144 6-9-13 9-14-22 9-16-26 11-17-28 157 27 0.060 3-7-11 4-9-13 6-11-15 7-13-19 279 29 0.080 4-9-14 6-11-18 8-14-20 9-18-25 436 30 0.108 5-11-18 7-14-22 11-18-25 12-22-32 628 31 0.128 7-13-21 9-17-27 13-21-30 14-27-38 855 32 0.156 8-15-25 10-20-31 15-25-35 16-31-44 1117 33 0.184 9-17-28 12-23-36 17-28-40 19-36-51 900 0.051 176 33 0.126 5-7-10 8-12-17 8-14-21 9-14-23 314 34 0.182 7-10-14 11-16-23 11-18-28 12-19-30 177 30 0.076 4-7-11 6-10-14 8-11-16 9-14-20 314 32 0.101 6-10-15 7-13-19 11-15-21 12-19-27 491 33 0.136 7-12-19 9-16-24 13-19-26 15-24-34 707 34 0.162 8-15-23 11-19-29 16-22-32 18-28-40 962 35 0.197 10-17-26 13-22-33 19-26-37 21-33-47 1257 36 0.232 11-20-30 15-26-38 21-30-42 24-38-54 1000 0.062 196 36 0.156 6-8-11 9-13-18 10-15-22 10-15-24 349 38 0.224 8-10-15 12-17-25 13-20-29 14-21-32 196 32 0.094 5-8-12 7-11-15 10-12-17 11-15-21 349 34 0.125 7-11-16 9-14-20 13-16-22 15-20-28 545 35 0.168 9-14-20 11-18-25 16-20-28 18-25-35 785 36 0.200 10-16-24 14-21-30 19-24-33 22-30-42 1069 37 0.243 12-19-28 16-25-35 22-27-39 26-35-49 1396 38 0.287 14-22-32 18-28-40 26-31-44 29-40-57 1100 0.075 216 40 0.189 6-8-11 10-14-19 11-16-23 11-17-25 384 41 0.272 8-11-15 13-18-26 15-22-30 15-23-33 216 34 0.113 6-9-12 8-11-16 10-12-17 12-16-22 384 36 0.151 8-12-17 10-15-21 13-16-23 16-21-30 600 37 0.204 10-15-21 13-19-26 17-21-29 21-26-37 864 38 0.241 12-18-25 16-22-32 20-25-35 25-31-44 1176 39 0.294 14-21-29 18-26-37 24-29-41 29-37-52 1536 40 0.347 16-24-33 21-30-42 27-33-47 33-42-59 • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure F PERFORMANCE DATA 16" Neck Neck Velocity Velocity Pressure Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Redefine your comfort zone. ™ | www.titus-hvac.com PCS / ROUND / CURVED BLADE / ADJUSTABLE - 1-, 2-, 3- OR 4-WAY DEFLECTORS F101 diffusers PCS / SQUARE / CURVED BLADE / ADJUSTABLE - 1-, 2-, 3- OR 4-WAY DEFLECTORS 12" x 12" Module Size Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA 6" x 6" Neck 8" x 8" Neck 6" x 6" Neck F 8" x 8" Neck 24" x 24" Module Size 10" x 10" Neck 12" x 12" Neck PERFORMANCE DATA 14" x 14" Neck F102 F102 15" x 15" Neck 16" x 16" Neck Neck Velocity Velocity Pressure Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw Air Flow, cfm NC (Noise Criteria) Total Pressure 4 Way - Horizontal Throw 3 Way - Horizontal Throw 2 Way - Horizontal Throw 1 Way - Horizontal Throw 300 0.006 75 0.016 1-2-6 1-2-9 1-2-9 1-3-11 133 0.023 1-2-8 1-3-12 1-3-12 2-4-14 75 0.010 1-1-5 1-2-6 1-2-9 1-3-10 133 0.014 1-2-6 1-2-8 1-3-12 1-3-13 208 0.017 1-2-8 1-3-11 2-4-15 2-4-17 300 0.020 1-2-9 1-3-13 2-5-18 2-5-20 408 12 0.026 1-3-11 2-4-15 2-5-21 3-6-24 469 12 0.027 1-3-12 2-4-16 3-6-23 3-6-25 533 13 0.030 1-3-12 2-4-17 3-6-24 3-7-27 400 0.010 100 0.029 1-3-8 2-4-12 2-4-14 2-5-14 178 0.041 2-4-10 2-6-16 2-6-18 3-7-19 100 13 0.017 1-2-7 1-3-10 2-4-12 2-4-15 178 15 0.025 1-3-10 2-4-13 2-5-16 3-6-20 278 16 0.031 2-3-12 2-5-16 3-7-20 3-7-25 400 17 0.035 2-4-15 2-6-19 4-8-24 4-9-30 544 18 0.046 2-5-17 3-7-22 4-9-28 5-10-35 625 18 0.049 2-5-19 3-7-24 4-10-30 5-11-38 711 19 0.054 2-6-20 3-7-26 5-11-32 5-12-40 500 0.016 125 14 0.045 2-4-9 3-7-15 3-7-17 4-8-18 222 15 0.064 3-6-12 4-9-20 4-9-23 5-11-23 125 18 0.026 1-3-9 2-4-12 3-6-13 3-7-17 222 19 0.039 2-4-12 3-6-16 4-8-18 4-9-23 347 21 0.048 2-5-15 3-7-20 5-10-22 5-12-28 500 22 0.055 3-7-19 4-9-24 6-13-27 6-14-34 681 23 0.072 3-8-22 5-10-28 6-15-31 7-16-39 781 23 0.076 4-8-23 5-11-30 7-16-33 8-18-42 889 24 0.084 4-9-25 5-12-32 7-17-35 8-19-45 600 0.022 150 20 0.065 3-6-10 4-9-16 4-9-19 5-11-21 267 21 0.092 4 - 8 - 13 6-12-21 6-12-25 7-14-28 150 22 0.038 2-5-10 3-6-13 4-9-15 4-10-19 267 23 0.056 3-6-14 4-8-18 5-12-19 6-13-25 417 25 0.070 3-8-17 5-11-22 7-15-24 7-17-31 600 26 0.079 4-9-21 6-13-26 8-18-29 9-20-37 817 27 0.103 5-11-24 7-15-31 9-21-34 10-24-43 938 27 0.110 5-12-26 7-16-33 10-23-36 11-25-46 1067 28 0.121 6-12-28 7-17-35 11-24-39 12-27-49 700 0.031 175 25 0.089 4-7-10 6-11-17 6-12-21 7-12-22 311 26 0.125 5 - 9 - 14 8-14-23 8-16-27 9-16-30 175 25 0.052 3-6-11 4-8-14 5-11-16 6-13-20 311 27 0.076 4-8-15 5-11-19 7-15-21 8-18-27 486 28 0.095 5-11-19 6-14-24 9-19-26 10-22-33 700 29 0.107 6-13-22 8-17-28 11-22-31 12-27-40 953 30 0.141 7-15-26 9-20-33 13-26-37 14-31-47 1094 31 0.150 7-16-28 10-21-36 14-28-39 15-33-50 1244 31 0.165 8-17-30 10-22-38 15-30-42 16-35-53 Performance notes appear at end of performance data 800 0.040 200 30 0.116 5-8-11 7-12-19 7-14-22 9-14-24 356 31 0.164 7-10-15 10-16-25 10-18-29 12-19-32 200 28 0.068 4-7-12 5-10-15 7-12-17 8-15-21 356 30 0.100 5-10-16 7-13-20 9-16-22 11-20-29 556 31 0.124 6-12-20 8-16-25 12-20-28 13-25-36 800 32 0.140 7-15-24 10-19-30 14-24-34 16-30-43 1089 33 0.184 9-17-28 12-22-35 17-28-39 19-35-50 1250 34 0.196 9-19-30 12-24-38 18-30-42 20-38-54 1422 34 0.215 10-20-32 13-26-41 19-32-45 21-40-57 900 0.051 225 33 0.146 6-8-12 9- 4-20 9-15-23 11-16-25 400 35 0.207 8-11-16 12-18-26 12-20-31 14-21-34 225 30 0.086 5-8-13 6-11-16 9-13-18 10-16-23 400 32 0.126 6-11-17 8-14-21 12-17-24 13-21-30 625 34 0.157 8-14-21 11-18-27 15-21-30 17-27-38 900 35 0.177 9-17-25 13-22-32 18-25-36 20-32-45 1225 36 0.232 11-19-30 15-25-38 21-29-42 24-37-53 1406 36 0.247 12-21-32 16-27-40 23-32-45 25-40-57 1600 36 0.273 12-22-34 17-29-43 24-34-48 27-43-61 1000 0.062 250 37 0.181 7-9-12 10-15-21 11-17-25 12-18-27 444 38 0.256 9-12-16 13-20-28 15-23-33 16-23-36 250 33 0.106 6-9-13 8-12-17 11-13-19 12-17-24 444 35 0.156 8-12-18 10-16-23 14-18-25 17-23-32 694 36 0.193 10-15-22 13-20-28 18-22-31 21-28-40 1000 37 0.218 12-19-27 16-24-34 22-27-38 25-34-48 1361 38 0.287 13-22-31 18-28-40 25-31-44 29-39-56 1563 38 0.305 14-23-34 19-30-42 27-33-47 31-42-60 1778 39 0.337 15-25-36 21-32-45 29-35-50 33-45-64 1100 0.075 275 40 0.219 7-9-13 11-15-22 12-18-26 13-19-28 489 41 0.309 10-12-17 15-21-29 17-24-34 17-26-38 275 35 0.128 7-10-14 9-13-18 11-14-20 14-18-25 489 37 0.189 9-13-19 12-17-24 15-19-26 19-24-33 764 38 0.234 11-17-23 15-21-30 19-23-33 23-30-42 1100 39 0.264 14-20-28 18-25-36 23-28-39 28-35-50 1497 40 0.347 16-23-33 21-29-42 27-33-46 33-41-59 1719 40 0.370 17-25-35 22-32-45 28-35-49 35-44-63 1956 41 0.407 18-27-38 23-34-48 30-37-53 37-47-67 Perforated Ceiling Diffusers (continued) diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Narrow Tee • Titus has a complete line of perforated diffusers that are designed to integrate into narrow tee ceiling systems • Perforated face blends diffuser into ceiling system NARROW TEE AVAILABLE MODELS: See website for Specifications F Supply Models: PAS-NT / Round Pattern PSS-NT / Star Pattern PCS-NT / Curved Blade Return Models: PAR-NT / Return PXP-NT / Return Panel FINISH Standard Finish - #26 White OVERVIEW Narrow Tee / Steel Perforated ceiling diffusers are typically selected to meet architectural demands for air outlets that blend into the ceiling plane. Titus perforated diffusers can be selected for a round pattern to maximize capacity or star pattern to maximize throw. NARROW TEE For Performance Data and Notes, please refer to page F86 for PAS-NT; page F92 for PAR-NT and PXP-NT; page F100 for PSS-NT; page F105 for PCS-NT. F103 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS NARROW TEE UNIT DIMENSIONS PAR-NT Nominal Duct Size D D minus 1/8" 1½" 3 3¼" 23¾" 24" F PXP-NT 3/8" DIMENSIONS 23¾" 24" F104 F104 All dimensions are in inches /8" Perforated Ceiling Diffusers (continued) diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PMC / PMC-DF / PMR • Titus Model PMC perforated, modular core diffuser is extremely flexible; it can be adjusted for a 1-, 2-, 3- or 4-way discharge pattern after it has been installed • Perforated face provides the architectural advantage of blending the diffuser into the ceiling system and at the same time offering the performance of the modular core diffuser for variable air volume applications. (Maintains a horizontal flow pattern from maximum to minimum cfm in VAV systems) • Perforated face discourages unwanted tampering with the air pattern adjustment by providing a barrier in front of the modular core • Perforated face has 3/16" diameter holes on ¼" staggered centers • Each of the modular core sections can easily be removed from the frame and rotated to provide 1-, 2-, 3-way or a vertical air pattern PMC / PMC-DF / PMR • Shipped with the modular core set for a 4-way discharge AVAILABLE MODELS: See website for Specifications F Supply Models: PMS / Flush Face PMS-DF / Drop Face Return Model: PMR / Flush Face FINISH Standard Finish - #26 White OVERVIEW Modular Core - 1-, 2-, 3-, or 4-Way Adjustable / Steel ADDITIONAL FEATURES • Optional AG-95 damper is accessible for adjustment by opening the perforated face and removing a core module • Material is heavy gauge steel perforated face and backpan; modular core section is steel • New core design results in a higher quality overall assembly, and easier changes to modular core placement PMC / PMC-DF / PMR PMC perforated, modular core diffuser can be adjusted for a 1, 2, 3 or 4-way discharge pattern after installation. The perforated face provides an architectural advantage of blending the diffuser into the ceiling system and at the same time offering the performance of the modular core diffuser. F105 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS F PMC / PMC-DF / PMR UNIT DIMENSIONS Model PMC Border Type 3 (Lay-In) Duct Size D minus ⅛" 4 Modular Cores 3½" 23¾" 24" Model PMC-DF Border Type 3 (Lay-In or Tegular) (Lay-In shown) Duct Size D minus ⅛" 4 Modular Cores 3½" ⅜" 23¾" 24" DIMENSIONS Model PMR Border Type 1C (Curved Frame, Surface Mount) Duct Size Duct Size minus ⅛" ⅜" 1⅝" Duct Size plus 3" Note: For PMR Border Types 1 and 3 select the PAR return F106 F106 All dimensions are in inches diffusers DIMENSIONS Border Type 1C (Surface Mount, Curved Frame) Duct Size plus 3½" AVAILABLE DUCT SIZES Duct Size minus ¼" Border Types PMR Module 3, 1C Border Type 1C Duct Sizes (inches) 6 x 6 12 x 12 6 x 6 12 x 12 20 x 20 8 x 8 14 x 14 8 x 8 14 x 14 22 x 22 10 x 10 16 x 16 10 x 10 16 x 16 22 x 10 18 x 18 18 x 18 46 x 22 2½" 3 Duct Size plus 7" REMOVING PERFORATED FACE - BORDER TYPE 3 1. Insert small screwdriver or other slim instrument to push latch inward from border /8" Redefine your comfort zone. ™ | www.titus-hvac.com BORDER TYPES In addition to Border Type 3 (lay-in), as dimensioned on the preceding page, PMC diffusers are also available in border types for surface mounting applications F 3. Face will now swing down with the other side hinging 2. Repeat on opposite side MODULAR CORE ADJUSTMENTS 1-Way 2-Way Opposite 2-Way Corner 3-Way 4-Way Vertical Each of the PMC modular core sections can easily be removed from the frame and rotated to provide the required air pattern 21/16" Slot Operator Available in duct sizes 6 x 6 inches through 16 x 16 inches DIMENSIONS OPTIONAL MODEL AG-95 - OPPOSED-BLADE DAMPER F107 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PMC / SUPPLY / MODULAR CORE - 1-, 2-, 3- OR 4-WAY BLOW PATTERN 6x6 Neck 8x8 Neck 10 x 10 Neck F 12 x 12 Neck 16 x 16 Neck PERFORMANCE DATA 18 x 18 Neck F108 F108 Neck Velocity Velocity Pressure Air Flow, cfm Total Pressure NC (Noise Criteria) 1 Way - Horizontal Throw 2 Way - Horizontal Throw 3 Way - Horizontal Throw 4 Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1 Way - Horizontal Throw 2 Way - Horizontal Throw 3 Way - Horizontal Throw 4 Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1 Way - Horizontal Throw 2 Way - Horizontal Throw 3 Way - Horizontal Throw 4 Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1 Way - Horizontal Throw 2 Way - Horizontal Throw 3 Way - Horizontal Throw 4 Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1 Way - Horizontal Throw 2 Way - Horizontal Throw 3 Way - Horizontal Throw 4 Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1 Way - Horizontal Throw 2 Way - Horizontal Throw 3 Way - Horizontal Throw 4 Way - Horizontal Throw 300 0.006 75 0.008 3-5-9 1-3-6 1-2-5 1-1-3 133 0.011 4-6-12 2-4-8 2-3-6 1-2-4 208 0.015 5-8-15 2-5-10 2-4-8 1-2-5 300 0.020 6-9-18 3-6-12 2-5-9 2-3-5 469 0.030 12 8-11-23 4-8-15 3-6-12 2-3-7 675 0.041 15 9-14-27 4-9-18 4-7-14 2-4-8 400 0.010 100 0.014 4-6-12 2-4-8 2-3-6 1-2-4 178 0.020 5-8-16 3-5-11 3-4-8 2-2-5 278 0.027 14 7-10-20 4-7-13 3-5-10 2-3-6 400 0.036 17 8-12-24 5-8-16 4-6-12 2-4-7 625 0.053 21 10-15-30 6-10-20 5-8-16 3-5-9 900 0.073 24 12-18-36 7-12-24 6-9-19 4-5-11 500 0.016 125 0.022 12 5-8-15 3-5-10 3-4-8 2-2-5 222 0.031 17 7-10-20 4-7-13 3-5-10 2-3-6 347 0.042 21 8-13-25 6-8-17 4-6-13 3-4-8 500 0.057 24 10-15-30 7-10-20 5-8-16 3-5-9 781 0.083 28 13-19-38 8-13-25 6-10-19 4-6-11 1125 0.115 31 15-23-45 10-15-30 8-12-23 5-7-14 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • Throw values are given for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines, for an explanation of catalog throw data. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB 600 0.022 150 0.031 17 6-9-18 4-6-12 3-5-9 2-3-5 267 0.044 22 8-12-24 5-8-16 4-6-12 2-4-7 417 0.061 26 10-15-30 7-10-20 5-8-16 3-5-9 600 0.082 30 12-18-36 8-12-24 6-9-19 4-5-11 938 0.119 34 15-23-45 10-15-30 8-12-23 5-7-14 1350 0.165 37 18-27-54 12-18-36 9-14-28 5-8-16 700 0.031 175 0.043 22 7-11-21 5-7-13 4-5-11 2-3-6 311 0.060 27 9-14-27 6-9-18 5-7-14 3-4-8 486 0.083 31 12-18-34 8-12-22 6-9-18 4-5-11 700 0.111 35 14-21-41 9-14-27 7-11-22 4-6-13 1094 0.162 39 18-26-51 12-18-33 9-14-27 5-8-16 1575 0.225 42 21-32-62 14-21-40 11-16-33 6-9-19 800 0.040 200 0.056 27 8-12-22 5-8-14 4-6-12 2-4-7 356 0.079 32 11-16-29 7-11-19 6-8-16 3-5-10 556 0.109 36 13-20-37 9-13-24 7-10-20 4-6-12 800 0.145 39 16-24-44 11-16-29 8-12-24 5-7-14 1250 0.212 43 20-30-55 13-20-36 10-16-30 6-9-18 1800 0.294 46 24-36-66 16-24-43 12-19-36 7-11-22 900 0.051 225 0.070 30 9-14-23 6-9-15 5-7-13 3-4-8 400 0.100 35 12-18-31 8-12-20 6-9-17 4-5-11 625 0.137 39 15-23-39 10-15-25 8-12-21 5-7-14 900 0.184 43 18-27-47 12-18-30 9-14-25 5-8-16 1406 0.268 47 23-34-58 15-23-38 12-17-32 7-10-20 2025 0.372 50 27-41-70 18-27-46 14-21-38 8-12-24 1000 0.062 250 0.087 34 10-15-25 7-10-16 5-8-13 3-5-9 444 0.123 39 13-20-33 9-13-21 7-10-18 4-6-12 694 0.170 43 17-25-41 11-17-27 9-13-22 5-8-15 1000 0.227 46 20-30-49 13-20-32 10-16-27 6-9-18 1563 0.331 50 25-38-61 17-25-40 13-19-34 8-11-22 2250 0.459 53 30-45-74 20-30-48 16-23-40 9-14-27 1100 0.075 275 0.105 37 11-17-26 7-11-17 6-9-14 3-5-9 489 0.149 42 15-22-34 10-15-22 8-11-19 4-7-13 764 0.205 46 18-28-43 12-18-28 9-14-23 6-8-16 1100 0.274 49 22-33-52 15-22-34 11-17-28 7-10-19 1719 0.401 53 28-41-64 18-28-42 14-21-35 8-12-23 2475 0.556 56 33-50-77 22-33-50 17-26-42 10-15-28 • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure diffusers Square Ceiling Diffusers • Titus Models TMS and TMS-AA square ceiling diffusers deliver supply air in a true 360° pattern. Designed to protect ceilings from streaking and smudging. • Excellent performance in variable air volume systems. The uniform, nearly horizontal jet from the outer cone maintains effective room air distribution even when the air volume varies over a considerable range. • All sizes have three cones, giving a uniform appearance where different neck sizes are used in the same area • Screwdriver adjustment of the optional damper is achieved without removing the inner cone. (See Step 2 in Adjusting Optional Damper, Removing Center Core diagram on page 111) • Quick removal of the inner cone with a hex key. (See Step 3 in Adjusting Optional Damper, Removing Center Core diagram on page 111) TMS / TMS-AA Redefine your comfort zone. ™ | www.titus-hvac.com TMS / TMS-AA • All cones are die-stamped, one piece construction. Smooth, clean surfaces with no corner joints. metric sizes AVAILABLE MODELS: energy solutions open ceiling See website for Specifications F TMS / Steel TMS-AA / Aluminum FINISH Standard Finish - #26 White OVERVIEW High Performance The TMS is a square ceiling diffuser that delivers supply air in a true 360º pattern with low pressure drop. The uniform, nearly horizontal jet from the outer cone maintains effective room air distribution even when the air volume varies over a considerable range. All sizes have three cones, giving a uniform appearance where different neck sizes are used in the same area. TMS diffusers installed in the ceiling of an office building ADDITIONAL FEATURES TMS / TMS-AA • Optional factory-installed R-6 foil-backed insulation available for 24 x 24" full face models, neck sizes 6-15, borders 1, 2, 3 and 4 • Optional (SB) sectorizing baffle is available. Consult your Titus representative for details. • Material: all sizes are available in steel (Model TMS). Only the 24 x 24" ceiling module is available in aluminum with steel bar (Model TMS-AA). F109 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS TMS / TMS-AA UNIT DIMENSIONS Frame Type 3 Full Face (Lay-In) Ceiling Module A Nominal Round Duct Size B Optional ½" Foil Insulation B minus ⅛" C D (note 1) E Ceiling Module A minus ¼" F Frame Type 3 Panel Mounted (Lay-In) Ceiling Module A Nominal Round Duct Size B B minus ⅛" C (note 1) D E F Ceiling Module A minus ¼" Ceiling Nominal Round C Module A Duct Size B Ceiling Module A Nominal Round Duct Nominal Face Size B Size F C D E 4, 5 (note 2) 31/8 53/8 11/8 24 x 24 4, 5 (note 2) 12 x 12 31/8 53/8 11/8 12 x 12 6, 7 (note 3) 11/8 33/8 11/8 24 x 24 6, 7 (note 3) 12 x 12 11/8 33/8 11/8 12 x 12 8 1¼ 3½ 1 /8 24 x 24 8 12 x 12 1¼ 3½ 11/8 24 x 24 DIMENSIONS E 12 x 12 24 x 24 F110 F110 D 6, 8 1 1¼ 5 1¼ 10, 12, 14, 15 13/8 51/8 1¼ Notes: 1. Aluminum construction is available in full face 24” x 24” ceiling module only. Steel construction is available in all sizes. 2. Adapter is provided for sizes 4 and 5 3. The smallest neck size available in aluminum is 6 inches All dimensions are in inches diffusers DIMENSIONS Frame Type 1 (Surface Mount) Full Face Frame Type 2 (Snap-In) Full Face or Panel Mounted Frame Type 4 (Spline) Full Face or Panel Mounted Ceiling Module A Ceiling Module A plus 1¼" Ceiling Module A Ceiling Module A minus 1" ⅜" ⅜" 1 Mounting Hardware by others /8" 13/16" Ceiling Module Face Size Nominal Round Duct Sizes Frame Types 12 x 12 24 x 24 24 x 24 (Panel) 12 x 12 24 x 24 12 x 12 4, 5, 6, 7, 8 6, 8, 10, 12, 14, 15 4, 5, 6, 7, 8 1, 2, 3, 4 1, 2, 3, 4 2, 3, 4 Neck Size + 2" Neck Size R-6 Fiberglass Redefine your comfort zone. ™ | www.titus-hvac.com OTHER AVAILABLE FRAME TYPES F Type 3 Frame Shown Optional Molded Insulation Blanket Insulation is R-6 where blanket has the most depth. One" clearance on each side of neck is left for insulated duct connection. 24 x 24" full face models only. Type 1 Frame Type 3 Frame Type 2 or Type 4 Frame ADJUSTING OPTIONAL DAMPER - REMOVING CENTER CONE DIMENSIONS 1. Remove center plug 2. Insert screwdriver through hex hole to adjust optional damper All dimensions are in inches 3. Insert hex key (by others) and unscrew center hub to remove center cone F111 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA TMS / SQUARE CEILING / ROUND NECK / HIGH PERFORMANCE 4" DIa. 5" Dia. 12" x 12" 6" Module Size DIa. 7" DIa. 8" DIa. F 6" Dia. 20" x 20" 8" Module Size Dia. 10" Dia. 6" DIa. 8" DIa. PERFORMANCE DATA 24" x 24" Module Size F112 F112 10" DIa. 12" Dia. 14" Dia. 15" Dia. Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet 400 0.010 35 0.012 1-1-3 55 0.015 1-2-4 79 0.018 2-2-5 107 0.020 2-3-5 140 0.022 2-3-6 79 0.016 1-1-4 140 0.017 2-4-5 218 0.020 2-5-7 79 0.016 1-2-4 140 0.016 2-3-5 218 0.017 2-4-7 314 0.017 3-5-9 428 0.018 4-5-11 491 0.018 4-6-12 500 0.016 44 0.018 1-2-4 68 0.023 2-2-5 98 0.028 2-3-6 134 0.031 2-3-7 175 0.035 3-4-8 98 0.025 1-2-4 175 0.027 2-4-6 273 0.032 3-6-10 98 0.025 1-2-4 175 0.025 2-3-7 273 0.026 3-5-9 393 0.027 11 4-6-11 535 0.028 13 5-7-14 614 0.028 13 5-7-15 600 0.022 52 0.026 1-2-4 82 0.033 2-3-6 118 0.041 2-3-7 160 0.045 3-4-8 209 0.050 12 3-5-9 118 0.035 2-3-5 209 0.038 3-4-8 327 0.045 17 4-7-11 118 0.035 2-3-5 209 0.036 11 3-4-8 327 0.037 14 4-5-11 471 0.038 16 5-7-14 641 0.040 18 5-8-16 736 0.040 19 6-9-18 700 0.031 61 0.035 2-3-5 95 0.044 2-3-7 137 0.056 13 3-4-8 187 0.062 15 3-5-9 244 0.069 17 4-5-11 137 0.048 14 2-3-6 244 0.057 13 4-6-9 382 0.062 20 4-8-14 137 0.048 12 2-3-6 244 0.049 15 3-5-9 382 0.051 18 4-6-13 550 0.052 21 5-8-16 748 0.054 22 6-10-19 859 0.055 23 7-10-21 800 0.040 70 0.046 12 2-3-6 109 0.058 15 2-4-7 157 0.073 18 3-5-9 214 0.081 20 4-5-10 279 0.090 22 4-6-12 157 0.063 18 2-4-7 279 0.067 19 5-7-12 436 0.081 24 5-9-15 157 0.063 16 2-4-7 279 0.064 19 4-5-11 436 0.066 22 5-7-14 628 0.068 24 6-9-18 855 0.071 26 7-11-21 982 0.072 27 8-12-22 Performance notes appear at end of performance data 1000 0.062 87 0.072 20 2-4-7 136 0.091 23 3-5-8 196 0.114 25 4-6-10 267 0.126 28 4-7-12 349 0.140 29 5-8-13 196 0.099 24 3-4-9 349 0.105 23 5-8-13 545 0.126 31 6-9-18 196 0.099 22 3-4-9 349 0.101 26 4-7-13 545 0.103 29 6-9-17 785 0.106 31 8-11-20 1069 0.110 33 9-14-23 1227 0.112 34 10-15-25 1200 0.090 105 0.104 26 3-4-7 164 0.131 29 4-6-9 236 0.164 32 5-7-11 321 0.181 34 5-8-13 419 0.202 36 6-9-14 236 0.142 30 4-5-10 419 0.152 29 5-9-15 654 0.180 36 7-11-19 236 0.142 28 4-5-11 419 0.145 31 5-8-14 654 0.149 34 7-11-18 942 0.153 36 9-14-22 1283 0.159 38 11-16-25 1473 0.162 39 12-18-27 1400 0.122 122 0.141 31 3-5-8 191 0.178 34 4-7-10 275 0.223 37 5-8-12 374 0.247 39 6-9-14 489 0.275 41 7-11-16 275 0.193 34 4-6-12 489 0.207 34 5-10-17 764 0.240 41 8-12-21 275 0.193 32 4-6-12 489 0.197 36 6-9-16 764 0.202 39 8-13-20 1100 0.208 41 11-16-23 1497 0.216 43 13-19-27 1718 0.220 44 14-21-29 1600 0.160 140 0.184 36 4-6-8 218 0.232 39 5-7-10 314 0.291 42 6-9-13 428 0.322 44 7-10-15 559 0.359 46 8-12-17 314 0.252 36 5-7-13 559 0.257 40 7-11-17 873 0.264 43 10-14-21 1257 0.272 45 12-18-25 1710 0.282 47 14-21-29 1963 0.287 48 16-22-31 PERFORMANCE DATA • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure Redefine your comfort zone. ™ | www.titus-hvac.com • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • If the diffuser is mounted on an exposed duct, the throw values are 70% of those listed in the table • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines, for an explanation of catalog throw data. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB diffusers F PERFORMANCE DATA F113 Redefine your comfort zone. ™ | www.titus-hvac.com Square Ceiling Diffusers (continued) diffusers TMSA / TMSA-AA • Titus Models TMSA and TMSA-AA diffusers include adjustable vanes which vary the discharge pattern between vertical and horizontal • All sizes have three cones, giving a uniform appearance where different neck sizes are used in the same area • Screwdriver adjustment of the optional damper is achieved without removing the inner cone. (See Step 2 in Adjusting Optional Damper, Removing Center Cone diagram in this section) • Quick removal of the inner cone with a hex key. (See Step 3 in Adjusting Optional Damper, Removing Center Cone diagram in this section) • All cones are die-stamped, one piece construction. Smooth, clean surfaces. TMSA / TMSA-AA • Optional (SB) sectorizing baffle is available. Consult your Titus representative for details. F metric sizes AVAILABLE MODELS: TMSA / Steel TMSA-AA / Aluminum FINISH Standard Finish - #26 White OVERVIEW High Performance / Horizontal to Vertical Discharge Pattern / Adjustable TMSA / TMSA-AA Titus Models TMSA and TMSA-AA diffusers feature adjustable vanes which vary the discharge pattern between vertical and horizontal for heating and cooling applications. These diffusers deliver supply air in 360º pattern and are designed to protect ceilings from smudging. All sizes have 3 cones providing a uniform appearance. F114 F114 ADDITIONAL FEATURES • Material: all sizes are available in steel (Model TMSA). Only the 24 x 24" ceiling module is available in aluminum with steel support bar (Model TMSA-AA). • Delivers supply air in 360B pattern. Designed to help protect ceilings from streaking and smudging. open ceiling See website for Specifications diffusers DIMENSIONS Frame Type 3 Full Face (Lay-In) Ceiling Module A Nominal Round Duct Size B Pattern Controller Vane B minus ⅛" C (note 1) D E Redefine your comfort zone. ™ | www.titus-hvac.com TMSA / TMSA-AA UNIT DIMENSIONS Ceiling Module A minus ⅜" Frame Type 3 Panel Mounted (Lay-In) F Ceiling Module A Pattern Controller Vane Nominal Round Duct Size B B minus ⅛" C (note 1) E D F Ceiling Module A minus ¼" Ceiling Nominal Round C Module A Duct Size B D E Ceiling Module A /8 24 x 24 4, 5 (note 2) /8 24 x 24 /8 24 x 24 12 x 12 4, 5 (note 2) 31/8 53/8 3 12 x 12 6, 7 (note 3) 11/8 33/8 3 12 x 12 8 1¼ 3½ 5 1¼ ¼ 24 x 24 24 x 24 6, 8 5 10, 12, 14, 15 13/8 51/8 Nominal Round Duct Nominal Face Size B Size F C D E 12 x 12 31/8 53/8 3 6, 7 (note 3) 12 x 12 11/8 33/8 3 8 12 x 12 1¼ 3½ 5 /8 /8 /8 ¼ All dimensions are in inches DIMENSIONS Notes: 1. Aluminum construction is available in full face 24” x 24” ceiling module only. Steel construction is available in all sizes. 2. Adapter is provided for sizes 4 and 5 3. The smallest neck size available in aluminum is 6 inches F115 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F TMSA / SQUARE CEILING / ROUND NECK / HIGH PERFORMANCE / HORIZONTAL TO VERTICAL DISCHARGE 4" DIa. 5" Dia. 12" x 12" Module Size 6" Dia. 7" Dia. PERFORMANCE DATA 8" Dia. F116 F116 Neck Velocity Velocity Pressure Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical 400 0.010 35 0.012 0.013 1-1-2 1-1-2 55 0.018 0.022 1-2-3 1-1-2 78 0.026 0.032 1-2-4 1-1-3 107 0.036 0.044 1-2-4 1-2-3 140 0.047 0.057 2-2-5 1-2-4 - 500 0.016 44 0.018 0.021 1-2-3 1-1-2 68 0.028 0.034 1-2-4 1-1-3 98 0.041 0.049 2-2-5 1-2-3 134 0.056 0.068 2-3-5 1-2-4 12 175 0.073 0.090 2-3-6 1-2-4 16 15 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • If the diffuser is mounted on an exposed duct, the throw values are 70% of those listed in the table • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information. • NC values are based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB 600 0.022 52 0.026 0.030 1-2-4 1-1-3 82 0.041 0.049 2-2-5 1-2-3 118 0.059 0.071 2-3-6 1-2-4 14 12 160 0.080 0.098 2-3-7 2-2-4 18 16 209 0.105 0.129 2-4-7 2-3-5 22 20 700 0.031 61 0.036 0.041 1-2-4 1-2-3 95 0.056 0.066 2-3-5 1-2-3 14 12 137 0.080 0.097 2-3-7 2-2-4 19 17 187 0.110 0.133 3-4-8 2-3-5 23 21 244 0.143 0.175 3-4-9 2-3-6 26 25 800 0.040 70 0.046 0.053 2-2-5 1-2-3 13 109 0.073 0.086 2-3-6 1-2-4 18 15 157 0.105 0.126 2-4-7 2-3-4 23 21 214 0.143 0.174 3-4-9 2-3-5 27 25 279 0.187 0.229 3-5-10 2-4-6 31 29 1000 0.062 87 0.072 0.083 2-3-6 1-2-3 20 16 136 0.114 0.135 3-4-8 2-3-4 25 22 196 0.164 0.198 3-5-9 2-3-5 30 27 267 0.223 0.272 4-5-11 3-4-6 34 31 349 0.292 0.358 4-6-12 3-4-7 37 35 1200 0.090 105 0.104 0.120 2-4-7 2-3-4 25 21 164 0.164 0.194 3-5-9 2-3-5 31 27 235 0.236 0.284 4-6-11 3-4-5 36 32 320 0.322 0.392 4-7-13 3-4-6 40 37 419 0.421 0.516 5-7-14 4-5-7 43 41 1400 0.122 122 0.142 0.164 3-4-8 2-3-4 30 26 191 0.223 0.265 4-5-10 3-3-5 36 32 274 0.321 0.387 4-7-12 3-4-6 40 37 374 0.438 0.533 5-8-14 4-5-7 44 41 489 0.573 0.702 6-9-16 4-6-8 48 45 1600 0.160 140 0.185 0.214 3-5-8 2-3-4 34 30 218 0.291 0.346 4-6-10 3-4-5 40 36 314 0.419 0.506 5-7-13 4-4-6 45 41 427 0.572 0.696 6-9-15 4-5-7 49 45 558 0.748 0.917 7-10-17 5-6-8 52 49 • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure • Horizontal throw is along a surface • Vertical throw is a free jet diffusers PERFORMANCE DATA 6" Dia. 8" Dia. 10" Dia. 24" x 24" Module Size 12" Dia. 14" Dia. 400 0.010 78 0.018 0.019 2-3-5 0-1-1 140 0.018 0.022 2-3-5 0-1-1 218 0.018 0.030 2-3-6 1-1-2 314 0.018 0.040 3-4-8 1-1-2 428 0.029 0.044 5-8-15 2-5-7 12 491 0.031 0.041 5-8-16 2-5-8 - 500 0.016 98 0.028 0.030 2-3-6 1-1-2 175 0.028 0.034 2-3-6 1-1-2 273 0.029 0.047 3-4-8 1-1-2 12 393 0.029 0.063 3-5-10 1-1-3 12 17 535 0.045 0.068 6-10-19 3-6-8 18 614 0.048 0.064 7-10-20 4-6-9 17 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • If the diffuser is mounted on an exposed duct, the throw values are 70% of those listed in the table • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information. • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB 600 0.022 118 0.040 0.043 3-4-7 1-1-2 209 0.041 0.049 3-4-8 1-1-2 12 12 327 0.041 0.068 3-5-10 1-1-3 15 18 471 0.041 0.090 4-6-12 1-2-3 18 23 641 0.065 0.098 8-11-21 5-6-9 12 23 736 0.069 0.092 8-12-22 5-7-10 13 22 700 0.031 137 0.055 0.058 3-5-8 1-1-2 14 13 244 0.056 0.067 3-5-9 1-1-2 17 16 382 0.056 0.092 4-6-11 1-2-3 20 22 550 0.056 0.123 5-7-14 1-2-4 23 27 748 0.089 0.134 9-13-22 6-7-10 18 28 859 0.094 0.125 10-14-24 6-7-10 19 27 800 0.040 157 0.072 0.076 3-6-8 1-1-3 18 17 279 0.073 0.088 3-5-10 1-1-3 21 20 436 0.073 0.120 4-6-13 1-2-4 24 26 628 0.073 0.161 5-8-15 1-2-4 27 31 855 0.116 0.175 10-15-24 6-7-10 23 32 982 0.123 0.164 11-16-25 6-8-11 24 31 1000 0.062 196 0.112 0.118 4-7-9 1-1-4 25 24 349 0.114 0.137 4-6-11 1-2-4 28 27 545 0.114 0.188 5-8-14 1-2-4 31 33 785 0.114 0.251 6-10-17 2-3-5 34 38 1069 0.181 0.273 13-19-27 7-8-12 32 38 1227 0.192 0.256 14-20-28 7-9-12 32 37 1200 0.090 235 0.162 0.171 4-7-10 1-2-4 30 29 419 0.164 0.197 5-8-12 1-2-4 33 32 654 0.164 0.271 6-10-15 2-3-5 37 38 942 0.165 0.361 8-12-18 2-3-6 39 43 1283 0.261 0.393 15-21-29 7-9-13 39 43 1472 0.277 0.369 16-22-31 8-10-14 39 42 1400 0.122 274 0.220 0.232 4-7-11 1-2-4 35 34 489 0.223 0.269 6-9-13 2-2-5 38 37 763 0.224 0.369 8-11-17 2-3-6 41 43 1099 0.224 0.492 9-14-20 2-4-7 44 48 1497 0.355 0.535 18-22-31 8-10-14 45 48 1718 0.377 0.502 19-24-34 8-10-15 45 47 1600 0.160 314 0.287 0.303 5-8-12 1-2-5 39 38 558 0.291 0.351 7-10-14 2-3-6 42 41 872 0.292 0.482 9-13-18 2-4-7 45 47 1256 0.293 0.642 10-15-21 3-4-9 48 52 1710 0.464 0.699 19-24-34 8-10-15 50 51 1963 0.492 0.655 21-25-36 9-11-16 50 50 • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • To obtain static pressure, subtract the velocity pressure from the total pressure • Horizontal throw is along a surface • Vertical throw is a free jet F PERFORMANCE DATA 15" Dia. Neck Velocity Velocity Pressure Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Airflow, cfm Total Pressure Horizontal Vertical Throw feet Horizontal Vertical NC (Noise Criteria) Horizontal Vertical Redefine your comfort zone. ™ | www.titus-hvac.com TMSA / SQUARE CEILING / ROUND NECK / HIGH PERFORMANCE / HORIZONTAL TO VERTICAL DISCHARGE F117 Redefine your comfort zone. ™ | www.titus-hvac.com Square Ceiling Diffusers (continued) MCD / MCD-AA • Titus Model MCD modular core diffuser is extremely flexible; it can be adjusted for a 1-, 2-, 3-, or 4-way pattern after it has been installed • Maintains a horizontal flow pattern from maximum to minimum cfm, making the MCD an excellent choice for variable air volume systems • Optional AG-95 opposed blade damper is accessible for adjustment from the diffuser face by removing a core module • MCD is shipped with the modular core set for 4-way discharge • Material is heavy gauge steel (MCD) or aluminum with miscellaneous steel parts (MCD-AA) • New core design results in a higher quality overall assembly, and easier changes to modular core placement • Now available with round neck for flex duct applications F diffusers AVAILABLE MODELS: MCD / MCD-AA See website for Specifications MCD / Steel MCD-AA / Aluminum FINISH Standard Finish - #26 White OVERVIEW Modular Core - 1-, 2-, 3-, or 4-Way Adjustable MCD / MCD-AA Titus Model MCD modular core diffuser is extremely flexible; it can be adjusted for a 1, 2, 3, or 4-way pattern after it has been installed. The MCD maintains a horizontal flow pattern from maximum to minimum cfm, making it an excellent choice for variable air volume systems. F118 F118 MCD diffusers installed in the ceiling of a library diffusers DIMENSIONS Border Type 1 (Surface Mount) Ceiling Opening = Duct Size plus 3½" Duct Size Duct Size minus ⅛" 2⅛" Redefine your comfort zone. ™ | www.titus-hvac.com MCD / MCD-AA DIMENSIONS 1" ¼" Duct Size plus 5 9/16" F Note: Two-way opposite pattern shown. AVAILABLE BORDER TYPES Border Type 3 (Lay-ln) Border Type 4 (Spline) Ceiling Module Border Type 6 (Beveled Drop Face) Duct Size plus 1" Duct Size minus ⅛" Duct Size minus ⅛" ⅜" 2⅛" Ceiling Module minus ¼" ⅜" Ceiling Module 2⅛" ⅞" 2⅛" Duct Size plus 5" DIMENSIONS All dimensions are in inches F119 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS AVAILABLE DUCT SIZES Border Types 1, 6 Available Module Size Duct Sizes (inches) 6x6 8x8 10 x 10 12 x 12 14 x 14 22 x 22 6 x 6 14 x 14 16 x 16 24 x 24 8 x 8 16 x 16 18 x 18 10 x 10 18 x 18 20 x 20 12 x 12 24 x 24 ROUND DUCT SIZES Available Module Size 24 x 24 F Border Types 3, 4 Border Type 3 Available Round Duct Minimum A Size 6x6 12 x 12 A Duct Size minus ⅛" 6 6, 8, 10, 12 Note: Round duct sizes are available only in sizes shown.adjustable cores MODULAR CORE ADJUSTMENTS 2-Way Opposite 2-Way Corner 3-Way DIMENSIONS 1-Way F120 F120 All dimensions are in inches 4-Way Vertical diffusers PERFORMANCE DATA 6 x 6 Neck 8 x 8 Neck 10 x 10 Neck 12 x 12 Neck 14 X 14 Neck 16 X 16 Neck 20 X 20 Neck 300 0.006 75 0.011 8-11-16 6-9-12 5-8-12 4-5-8 133 0.013 10-15-21 8-12-16 7-11-16 5-7-10 208 0.016 13-19-27 10-14-20 9-14-19 6-9-13 300 0.020 16-23-32 12-17-24 11-16-23 7-11-15 408 0.024 18-26-37 14-20-29 13-19-27 8-13-18 533 0.029 12 21-30-42 16-23-33 14-22-31 10-14-21 675 0.035 15 28-34-48 21-26-37 20-25-35 13-16-23 833 0.041 17 31-38-53 24-29-41 22-27-39 15-18-26 400 0.010 100 0.019 10-13-18 8-10-14 7-10-13 5-6-9 178 0.023 14-17-25 11-13-19 10-13-18 6-8-12 278 0.029 17-22-31 13-17-24 12-16-22 8-11-15 400 0.035 14 21-26-37 16-20-28 14-19-27 10-13-18 544 0.043 17 24-30-43 19-23-33 17-22-31 11-15-21 711 0.052 20 28-35-49 21-27-38 19-25-36 13-17-24 900 0.062 22 32-39-55 24-30-42 23-29-40 15-19-27 1111 0.073 24 35-43-61 27-33-47 26-32-45 17-21-30 500 0.016 125 0.030 12-15-21 9-11-16 9-11-15 6-7-10 222 0.036 12 16-19-27 12-15-21 12-14-20 8-9-13 347 0.045 17 20-24-34 15-19-26 14-18-25 10-12-17 500 0.055 20 24-29-41 18-22-32 17-21-30 12-14-20 681 0.067 23 28-34-48 21-26-37 20-25-35 13-16-23 889 0.081 26 32-39-55 24-30-42 23-28-40 15-19-27 1125 0.097 28 36-44-62 27-34-47 26-32-45 17-21-30 1389 0.114 30 40-48-69 30-37-53 29-35-50 19-23-33 600 0.022 150 0.043 11 13-16-23 10-12-17 10-12-16 6-8-11 267 0.053 17 17-21-30 13-16-23 13-16-22 8-10-15 417 0.065 21 22-27-38 17-20-29 16-19-27 11-13-18 600 0.079 25 26-32-45 20-24-35 19-23-33 13-15-22 817 0.097 28 30-37-53 23-29-40 22-27-38 15-18-25 1067 0.117 31 35-42-60 27-33-46 25-31-44 17-21-29 1350 0.139 33 39-48-68 30-37-52 29-35-49 19-23-33 1667 0.165 35 43-53-75 33-41-58 32-39-55 21-26-36 700 0.031 175 0.059 15 14-17-24 11-13-19 10-13-18 7-8-12 311 0.071 21 19-23-32 14-18-25 14-17-24 9-11-16 486 0.088 26 23-29-41 18-22-31 17-21-30 11-14-20 700 0.108 29 28-34-49 22-26-37 21-25-36 14-17-24 953 0.132 32 33-40-57 25-31-44 24-29-41 16-19-28 1244 0.159 35 37-46-65 29-35-50 27-34-47 18-22-31 1575 0.190 37 42-52-73 32-40-56 31-38-53 20-25-35 1944 0.224 39 47-57-81 36-44-62 34-42-59 23-28-39 800 0.040 200 0.077 19 15-18-26 12-14-20 11-13-19 7-9-13 356 0.093 25 20-25-35 15-19-27 15-18-25 10-12-17 556 0.115 29 25-31-43 19-24-33 18-22-32 12-15-21 800 0.141 33 30-37-52 23-28-40 22-27-38 15-18-25 1089 0.172 36 35-43-61 27-33-47 26-31-44 17-21-29 1422 0.207 39 40-49-69 31-38-53 29-36-51 19-24-34 1800 0.248 41 45-55-78 35-42-60 33-40-57 22-27-38 2222 0.293 43 50-61-87 38-47-67 37-45-63 24-30-42 900 0.051 225 0.097 22 16-20-28 12-15-21 12-14-20 8-9-13 400 0.118 28 21-26-37 16-20-28 16-19-27 10-13-18 625 0.145 32 27-33-46 20-25-35 19-24-34 13-16-22 900 0.178 36 32-39-55 24-30-42 23-29-40 15-19-27 1225 0.217 39 37-46-64 29-35-49 27-33-47 18-22-31 1600 0.263 42 42-52-74 33-40-57 31-38-54 21-25-36 2025 0.314 44 48-59-83 37-45-64 35-43-60 23-28-40 2500 0.371 46 53-65-92 41-50-71 39-48-67 26-32-45 1000 0.062 250 0.120 25 17-21-29 13-16-22 12-15-21 8-10-14 444 0.146 31 22-27-39 17-21-30 16-20-28 11-13-19 694 0.179 35 28-34-48 22-26-37 20-25-35 14-17-23 1000 0.220 39 34-41-58 26-32-45 25-30-42 16-20-28 1361 0.268 42 39-48-68 30-37-52 29-35-50 19-23-33 1778 0.324 45 45-55-78 34-42-60 33-40-57 22-27-38 2250 0.387 47 50-62-87 39-47-67 37-45-64 24-30-42 2778 0.458 49 56-69-97 43-53-75 41-50-71 27-33-47 1100 0.075 275 0.145 28 18-22-30 14-17-23 13-16-22 9-10-15 489 0.177 33 23-29-41 18-22-31 17-21-30 11-14-20 764 0.217 38 29-36-51 23-28-39 21-26-37 14-17-25 1100 0.266 41 35-43-61 27-33-47 26-32-45 17-21-30 1497 0.325 44 41-50-71 32-39-55 30-37-52 20-24-34 1956 0.392 47 47-57-81 36-44-63 34-42-59 23-28-39 2475 0.469 49 53-65-91 41-50-70 39-47-67 26-31-44 3056 0.554 52 59-72-102 45-55-78 43-53-74 28-35-49 F PERFORMANCE DATA 18 X18 Neck Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Redefine your comfort zone. ™ | www.titus-hvac.com MCD / MCD-AA / SQUARE CEILING / MODULAR CORE / 1-, 2-, 3- OR 4-WAY BLOW PATTERN F121 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F MCD / MCD-AA / SQUARE CEILING / MODULAR CORE / 1-, 2-, 3- OR 4-WAY BLOW PATTERN 22 X 22 Neck 24 X 24 Neck 6" Round in 6 x 6 Square Neck 6" Round in 12 x 12 Square Neck 8" Round in 12 x 12 Square Neck PERFORMANCE DATA 10" Round in 12 x 12 Square Neck F122 F122 12" Round in 12 x 12 Square Neck Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Airflow, cfm Total Pressure NC (Noise Criteria) 1-Way - Horizontal Throw 2-Way - Horizontal Throw 3-Way - Horizontal Throw 4-Way - Horizontal Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw Air Flow, cfm Total Pressure NC (Noise Criteria) 1-way Throw 2-way Throw 3-way Throw 4-way Throw 300 0.006 1008 0.048 19 34-41-58 26-32-45 25-30-43 16-20-28 1200 0.056 20 37-45-64 28-35-49 27-33-47 18-22-31 60 0.016 3-5-10 3-5-10 2-3-7 1-2-4 60 0.007 15 1-3-9 1-2-7 1-2-6 1-2-4 105 0.008 3-6-13 3-6-12 2-5-9 2-4-7 164 0.010 5-10-18 3-7-15 2-4-10 2-4-8 236 0.014 13-17-24 8-12-18 7-11-19 2-5-12 400 0.010 1344 0.086 26 39-48-67 30-37-52 28-35-49 19-23-33 1600 0.099 28 42-52-74 33-40-57 31-38-54 21-25-36 80 0.029 15 5-7-14 4-7-11 3-5-9 1-3-5 80 0.012 22 3-6-12 2-4-9 2-4-8 1-2-5 140 0.014 5-9-17 5-8-15 4-6-12 3-5-9 218 0.019 8-13-20 5-10-18 4-7-13 3-5-10 314 0.025 12 16-19-28 10-15-21 9-14-22 4-8-15 500 0.016 1681 0.134 32 44-53-75 33-41-58 32-39-55 21-26-37 2000 0.155 34 47-58-82 37-45-63 35-42-60 23-28-40 100 0.046 19 6-9-15 6-8-12 4-6-11 2-3-7 100 0.019 26 4-7-13 3-6-10 3-5-9 2-3-6 175 0.022 15 7-11-19 7-10-17 5-8-15 4-6-10 273 0.029 14 11-16-23 8-12-20 6-8-15 4-7-11 393 0.040 18 18-22-31 13-16-23 12-17-25 6-10-17 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines of this catalog for additional information. • Dash (-) in space denotes an NC value of less than 10 • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information. 600 0.022 2017 0.193 37 48-58-83 37-45-64 35-43-60 23-28-40 2400 0.224 39 52-64-90 40-49-69 38-47-66 25-31-44 120 0.066 23 7-10-17 7-10-14 5-7-12 3-4-8 120 0.027 30 6-9-15 4-7-11 4-6-10 2-4-7 209 0.032 19 9-13-21 8-12-18 6-9-17 5-7-11 327 0.042 18 13-18-25 10-15-22 7-10-16 5-8-12 471 0.057 23 19-24-34 15-18-26 14-19-27 8-12-18 700 0.031 2353 0.263 41 51-63-89 40-49-69 38-46-65 25-31-43 2800 0.304 43 56-69-97 43-53-75 41-50-71 27-33-47 140 0.089 26 8-12-18 8-10-15 5-8-13 3-5-9 140 0.037 33 7-10-16 5-8-12 5-7-11 3-4-8 244 0.043 22 10-15-23 9-14-20 7-11-18 5-8-12 382 0.057 22 15-19-27 11-17-24 8-12-18 6-9-13 550 0.078 26 21-26-36 16-20-28 16-21-29 10-14-20 800 0.040 2689 0.343 45 55-67-95 42-52-73 40-49-70 27-33-46 3200 0.398 47 60-74-104 46-57-80 44-54-76 29-36-50 160 0.117 28 9-14-20 9-11-16 6-9-14 3-5-10 160 0.048 36 8-12-17 6-9-13 5-8-12 3-5-8 279 0.056 25 12-17-24 10-15-21 8-12-19 6-9-12 436 0.074 25 17-20-29 13-18-26 9-13-19 7-10-14 628 0.101 30 22-28-39 17-21-29 18-22-31 11-15-21 900 0.051 3025 0.434 48 58-72-101 45-55-78 43-52-74 28-35-49 3600 0.503 50 64-78-110 49-60-85 47-57-81 31-38-53 180 0.148 30 10-15-21 10-12-17 7-10-14 4-6-10 180 0.061 39 9-13-18 7-10-14 6-9-12 4-5-9 314 0.071 27 13-18-26 12-16-22 9-14-20 7-9-13 491 0.094 28 18-22-31 15-19-27 10-14-20 8-10-14 707 0.128 33 24-29-41 18-22-31 19-23-33 12-16-22 1000 0.062 3361 0.536 51 62-75-107 47-58-82 45-55-78 30-37-52 4000 0.621 53 67-82-116 52-63-89 49-60-85 33-40-56 200 0.182 33 12-15-22 10-12-18 8-11-15 4-7-11 200 0.075 41 10-13-19 8-10-14 7-9-13 4-6-9 349 0.088 29 15-19-27 13-17-24 10-15-22 8-10-14 545 0.116 31 19-23-32 16-20-29 11-15-21 9-11-15 785 0.158 35 25-31-44 19-23-33 20-25-35 14-17-23 1100 0.075 3697 0.648 53 65-79-112 50-61-86 47-58-82 31-38-54 4400 0.752 55 70-86-122 54-66-94 51-63-89 34-42-59 220 0.221 34 13-16-23 11-13-18 9-11-16 5-7-11 220 0.091 43 11-14-20 8-11-15 7-10-14 4-7-9 384 0.106 31 16-20-28 14-18-25 11-16-23 8-10-15 600 0.140 33 19-24-34 17-21-30 12-16-22 9-11-16 864 0.192 38 26-32-46 20-24-35 21-26-37 14-17-25 • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure scan page with Titus AR to reveal hidden content diffusers Architectural Ceiling Diffusers Redefine your comfort zone. ™ | www.titus-hvac.com OMNI / OMNI-AA • The Titus OMNI diffuser satisfies architectural as well as engineering criteria. Its strong, clean, unobtrusive lines harmonize with the ceiling system, without sacrificing performance. • The curvature of the OMNI backpan works with the formed edges of the face panel to deliver a uniform 360° horizontal air pattern, without excessive noise or pressure drop • The OMNI diffuser is an excellent choice for variable air volume systems. The air pattern remains tight and horizontal for effective room air distribution, even when the volume varies over a wide range. • The face panel is constructed from 22-gauge steel or heavy gauge aluminum. The edges of the face panel are formed to a radius for a solid, crisp appearance. The formed edges also stiffen the face panel and assure a straight and level surface. OMNI / OMNI-AA metric sizes The Titus AR mobile app is available for download on most Android devices and iOS AVAILABLE MODELS: retrofit MRI compatible woodgrains open ceiling See website for Specifications F OMNI / Steel OMNI-AA / Aluminum FINISHES Standard Finish - #26 White Optional Finish - Woodgrains (See Woodgrains Brochure for Finishes) OVERVIEW Square Plaque ADDITIONAL FEATURES • The formed edges of the face panel capture another 22-gauge steel or heavy gauge aluminum panel that the hanger brackets are mechanically fastened to. This process provides the OMNI face with a smooth finish under any lighting conditions. • The OMNI-AA is entirely constructed of aluminum, perfect for MRI applications OMNI diffusers installed in the ceiling of a country club • The face panel is held in place by four hook brackets that positively engage into slots in the backpan. The panel can be removed from the backpan for easy installation of the diffuser or for access to the optional damper. • The new face panel construction ensures a smooth, clean appearance and easier installation and removal • Optional factory-insulated R-6 foil-backed insulation available for 24 x 24" full face models, neck sizes 6-15, borders 1, 2, 3 and 4 OMNI / OMNI-AA The Titus OMNI (steel plaque) & OMNI-AA (all-aluminum plaque) face diffusers that satisfie architectural and engineering criteria. Their strong, clean, unobtrusive lines harmonize with ceiling systems without sacrificing performance. The curvature of the OMNI & OMNIAA backpans work with the formed edges of the face panel to deliver a uniform 360 degree horizontal air pattern, without excessive noise or pressure drop. They are an excellent selection for variable air volume systems. F123 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS OMNI / OMNI-AA DIMENSIONS Frame Type 3 (Lay-In) Full Face Ceiling Module A Nominal Round Duct Size B B minus ⅛" C D ¼" F E Ceiling Module A minus ¼" Inlet View Inlet View Showing Flex Duct Connection and T-Bars by Others DIMENSIONS Ceiling Module A F124 F124 Nominal Round Duct C Size B 4, 5 (note 1) 27/8 12 x 12 6, 7 11/8 (note 2) 8 1¼ 4, 5 (note 1) 2¾ 20 x 20 6, 8, 10 ¾ 6, 8 1¼ 24 x 24 10, 12, 14, 15 13/8 Note 1: Adapter is provided for sizes 4 and 5 Note 2: 12 x 12" module is available in steel only D 4 2¼ 23/8 5¼ 3¼ 3¾ 37/8 E 9 135/8 18 All dimensions are in inches diffusers DIMENSIONS Frame Type 1 (Surface Mount) Full Face Frame Type 2 (Snap-In) Full Face or Panel Mounted OMNI Only Frame Type 4 (Spline) Full Face or Panel Mounted OMNI Only Ceiling Module A Ceiling Module A Ceiling Module A plus 1¼" Ceiling Module A minus 1" ⅜" ⅜" ⅛" 13 Frame Type 4V - (Recessed Spline) - Full Face OMNI Only Mounting Hardware by others /16" Redefine your comfort zone. ™ | www.titus-hvac.com ADDITIONAL FRAME TYPES Frame Type 4T - (Clip-On Recessed Spline) - Full Face OMNI Only Ceiling Module A Ceiling Module A Recessed Spline Tile Clip-On Recessed Spline Tile Cable Support Hole Cable Support Hole ½" 11/8" F ¼" ¼" Note: If Border 4V is adjacent to a light fixture a gap will be visible above the backpan. A T-bar extender is available to fill this void, available from the ceiling manufacturer. Borders 4V and 4T have four mounting clips. Two clips on opposed sides with holes to attach mounting wire from above. OPTIONAL DIRECTIONAL BLOW CLIPS Available Model: DB DB Clips to Rods • Converts OMNI diffuser from standard 4-way blow to 1-, 2- or 3-way • Clips attach to hanger brackets on upper face of center panel All dimensions are in inches DIMENSIONS Center Panel F125 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS OPTIONAL MOLDED INSULATION BLANKET Duct Size plus 2 R-6 Fiberglass Duct Size Insulation is R-6 where blanket has the most depth. One inch clearance on each side of neck is left for insulated duct connection. 24 x 24" full face models only. F REMOVING AND REPLACING FACE PANEL - ADJUSTING OPTIONAL DAMPER Installing Face Panel 1. Insert the hook brackets into the slots in the backpan 2. Rotate the face panel clockwise until... 3. The hooks positively engage in the secondary slots in the backpan 1. Removing Face Panel 1. Lift the faceplate towards the backpan to disengage the hook brackets from the backpan slots 2. Rotate the faceplate counterclockwise 3. Lower the faceplate away from the backpan 2. DIMENSIONS Adjusting Optional Damper 1. Remove face panel as above 2. Use flat blade screwdriver to turn operator shaft at center of damper 3. Replace face panel F126 F126 3. All dimensions are in inches diffusers PERFORMANCE DATA 4" Round Neck 12"x12" Module Size 5" Round Neck 6" Round Neck 7" Round Neck 20" x 20" Module Size 8" Round Neck 6" Dia. 8" Dia. 10" Dia. 6" Round Neck 10" Round Neck 12" Round Neck 14" Round Neck 15" Round Neck 400 0.010 35 0.034 1-2-3 55 0.040 2-2-5 78 0.049 2-3-6 107 0.058 3-4-8 140 0.070 3-5-9 78 0.016 1-1-3 140 0.019 1-2-4 218 0.024 3-4-6 78 0.011 1-1-4 140 0.018 2-3-6 218 0.027 3-4-8 314 0.038 4-5-11 428 0.051 4-7-13 491 0.058 5-7-15 - 500 0.016 44 0.053 1-2-4 68 0.063 2-3-6 98 0.076 3-4-8 134 0.091 3-5-9 175 0.109 4-6-11 98 0.025 1-1-4 175 0.030 2-3-6 273 0.038 3-4-7 98 0.017 1-2-4 175 0.028 2-4-7 273 0.042 3-5-10 393 0.059 5-7-14 535 0.079 6-8-16 614 0.090 6-9-17 - 600 0.022 52 0.076 2-2-5 12 82 0.091 2-3-7 12 118 0.109 3-5-9 12 160 0.131 4-6-11 12 209 0.156 5-7-14 12 118 0.036 1-2-4 209 0.043 2-4-6 327 0.055 4-5-8 118 0.025 1-3-5 209 0.040 3-4-9 327 0.060 4-6-12 471 0.085 5-8-15 12 641 0.114 7-10-17 14 736 0.130 7-11-19 15 700 0.031 61 0.103 2-3-6 17 95 0.124 3-4-8 17 137 0.149 4-5-11 17 187 0.178 4-7-13 17 244 0.213 5-8-16 17 137 0.049 16 1-3-5 244 0.058 18 3-4-7 382 0.074 18 4-6-8 137 0.034 2-3-6 244 0.055 3-5-10 12 382 0.082 5-7-13 15 550 0.115 6-9-16 18 748 0.155 8-12-19 20 859 0.177 9-13-20 21 800 0.040 70 0.134 2-3-6 21 109 0.161 3-5-9 21 157 0.194 4-6-12 21 214 0.233 5-8-15 21 279 0.278 6-9-18 21 157 0.063 20 1-3-6 279 0.075 22 3-5-7 436 0.096 23 5-6-9 157 0.044 2-4-7 13 279 0.072 4-6-12 17 436 0.107 5-8-14 20 628 0.151 7-11-17 23 855 0.202 9-13-20 25 982 0.231 10-15-22 26 Performance notes appear at end of performance data 900 0.051 79 0.170 2-4-7 24 123 0.204 3-5-10 24 176 0.246 5-7-14 24 240 0.295 6-9-17 24 314 0.352 7-10-19 24 173 .080 24 2-3-6 314 .096 26 3-5-8 491 .123 27 5-7-9 176 0.056 3-4-8 17 314 0.091 4-6-12 21 491 0.136 6-9-15 24 707 0.191 8-12-18 27 962 0.256 10-15-21 29 1104 0.292 11-16-23 30 1000 0.062 87 0.210 3-4-8 27 136 0.252 4-6-12 28 196 0.303 5-8-15 28 267 0.364 6-9-18 28 349 0.434 8-11-20 28 196 0.100 28 2-4-7 349 0.118 30 4-6-8 545 0.151 31 6-7-10 196 0.069 3-4-9 21 349 0.112 5-7-13 25 545 0.168 7-10-16 28 785 0.235 9-14-19 31 1069 0.316 11-16-23 33 1227 0.360 12-17-24 34 1200 0.090 105 0.303 3-5-10 33 164 0.363 5-7-14 33 235 0.437 6-9-17 33 320 0.524 8-11-20 33 419 0.626 9-14-22 33 235 0.142 34 3-5-8 419 0.169 36 5-6-9 654 0.215 37 6-8-11 235 0.099 4-5-11 28 419 0.162 6-9-14 32 654 0.241 8-12-18 35 942 0.339 11-15-21 38 1283 0.455 13-17-25 40 1472 0.519 15-19-26 41 1400 0.122 122 0.412 4-6-11 38 191 0.494 5-8-15 38 274 0.594 7-11-18 38 374 0.714 9-13-21 38 489 0.852 11-16-24 38 274 0.193 39 3-5-8 489 0.229 41 5-7-10 763 0.292 42 7-9-12 274 0.135 4-6-11 34 489 0.220 7-10-15 38 763 0.329 10-13-19 41 1099 0.461 13-16-23 43 1497 0.619 15-19-27 45 1718 0.706 17-20-29 46 F PERFORMANCE DATA 24"x24" Module Size 8" Round Neck Neck Velocity Velocity Pressure Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure NC (Noise Criteria) Throw feet Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Airflow, cfm Total Pressure, Inches WG Throw Feet NC (Noise Criteria) Redefine your comfort zone. ™ | www.titus-hvac.com OMNI / OMNI-AA - ARCHITECTURAL CEILING / SQUARE PLAQUE F127 Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PERFORMANCE DATA F F128 F128 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the Engineering Guidelines section of this catalog for additional information. • If the diffuser is mounted on an exposed duct, the throw values are 70% of those listed in the table • Throw values are given for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for catalog throw data information. diffusers • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB • Dash (-) in space denotes an NC value of less than 10 • Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts. • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure diffusers Architectural Ceiling Diffusers (continued) • The OMNI-NT and OMNI-AA-NT are designed to integrate into 24 x 24 Narrow Tee regressed ceiling systems • The OMNI-NT and OMNI-AA-NT has strong, clean lines that harmonize with the ceiling system, yet performance is not sacrificed • The curvature of the OMNI-NT and OMNI-AA-NT backpan works with the aerodynamically formed edge of the face panel to provide a tight 360° pattern • Meets architectural and engineering criteria • The edges of the face panel are formed to a radius for a solid, crisp appearance. The formed edges also stiffen the face panel and assure a straight and level surface. OMNI-AA / OMNI-AA-NT metric sizes AVAILABLE MODELS: woodgrains MRI compatible See website for Specifications Redefine your comfort zone. ™ | www.titus-hvac.com OMNI-NT / OMNI-AA-NT F OMNI-NT / Steel OMNI-AA-NT / Aluminum FINISHES Standard Finish - #26 White Optional Finish - Woodgrains (See Woodgrains Brochure for Finishes) OVERVIEW Square Plaque Narrow Tee ADDITIONAL FEATURES • The OMNI-AA-NT has optional Directional Blow Chips (DB) which allow the air pattern to be changed to three, two or one blow direction • The OMNI-AA-NT is entirely constructed of aluminum, perfect for MRI applications • The panel can be removed from the backpan for easy installation of the diffuser or for access to the optional damper • The new face panel construction ensures a smooth, clean appearance and easier installation and removal OMNI-NT / OMNI-AA-NT The Titus OMNI-NT (steel plaque) & OMNI-AA-NT (all-aluminum plaque) face diffusers for narrow tee installations that satisfie architectural and engineering criteria. Their strong, clean, unobtrusive lines harmonize with ceiling systems without sacrificing performance. The curvature of the OMNI-NT & OMNI-AA-NT backpans work with the formed edges of the face panel to deliver a uniform 360 degree horizontal air pattern, without excessive noise or pressure drop. They are an excellent selection for variable air volume systems. F129 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS OMNI-NT / OMNI-AA-NT UNIT DIMENSIONS Nominal Round Duct Size B B minus ⅛" C ⅜" D 18" 23⅜" 24" F Nominal Round Duct Size B C D 24 x 24 6, 8 10, 12, 14, 15 1¼ 13/8 3¾ 37/8 DIMENSIONS Ceiling Module A F130 F130 All dimensions are in inches ¼" diffusers Architectural Ceiling Diffusers (continued) Redefine your comfort zone. ™ | www.titus-hvac.com R-OMNI • The Titus R-OMNI - a great look in circular diffusers designed for architectural ceilings and facilities with exposed ductwork • R-OMNI’s completely smooth face is adjustable in three positions for horizontal or vertical flow. Can be used effectively in heating or cooling applications. • Uniform 360B discharge pattern • Excellent performance in variable air volume systems • Optional Type B outer cone for reducing ceiling smudging • Spring lock allows easy removal and replacement of the plaque assembly • Material is heavy gauge steel R-OMNI energy solutions AVAILABLE MODEL: open ceiling See website for Specifications F R-OMNI / Steel FINISH Standard Finish - #26 White OVERVIEW Round Plaque / Steel The appearance of the R-OMNI diffuser is designed for architectural ceilings and facilities with exposed ductwork. The smooth face is adjustable in three positions for horizontal or vertical flow. The R-OMNI can be used effectively in heating or cooling applications and is an excellent choice in Variable Air Volume Systems. R-OMNI installed in ceiling of a museum R-OMNI F131 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS R-OMNI UNIT DIMENSIONS Ceiling Opening Diameter B Nominal Round Duct D Outer Cone Web Plaque Ceiling Level F Outside Diameter C Model B Outer Cone (optional) Outside Diameter F Ceiling Opening Diameter B Nominal Round Duct Size D X DIMENSIONS Model B Outer Cone Nominal Round Duct Size D B C P* X 6 8 10 12 14 12 16 20 24 28 13½ 18 22½ 27 311/8 ½ ½ ½ 11 /16 13 /16 115/16 25/8 3¼ 37/8 49/16 Type B Cone BB BC 7 17¾ 9 23¼ 11 29 13 347/8 14 405/8 Note: The plaque frame on model R-OMNI projects above the neck of the diffuser. The maximum projection is Dimension P. F132 F132 All dimensions are in inches diffusers PERFORMANCE DATA Positions Center Down 6" Up Positions Center Down 8" Up Positions Center Down 10" Up Positions Center Down Up Positions Center Down 14" Up 400 0.010 79 0.017 2-4-8 0.012 1-3-6 0.026 2 2 1 1 140 0.019 2-3-6 0.014 2-3-5 0.040 6 5 5 4 218 0.019 3-4-8 0.015 3-4-8 0.028 7 7 6 5 314 0.022 15 5-7-14 0.016 10 4-6-11 0.033 10 8 8 7 7 428 0.015 4-6-12 0.011 3-6-12 0.022 10 10 9 9 500 0.016 98 0.027 2-5-9 0.018 2-4-7 0.041 3 3 2 2 175 0.029 3-4-8 0.021 3-4-8 0.062 7 6 6 5 273 0.030 3-5-10 0.024 3-5-10 0.044 8 8 7 6 393 0.034 19 6-9-16 0.025 15 5-7-14 0.052 15 9 9 8 8 535 0.024 13 5-8-14 0.016 12 5-8-14 0.034 15 12 12 11 11 600 0.022 118 0.039 3-6-10 0.026 3-5-8 0.059 10 4 4 3 2 209 0.042 3-5-9 0.031 3-5-9 0.089 10 8 7 7 6 327 0.043 14 4-6-11 0.034 4-6-11 0.064 9 9 8 7 471 0.048 22 7-10-17 0.036 19 6-8-16 0.074 20 11 10 9 9 641 0.034 18 6-9-15 0.024 17 6-9-16 0.050 20 14 13 13 12 700 0.031 137 0.053 13 5-7-10 0.036 4-6-9 0.080 15 5 5 4 3 244 0.057 12 4-5-10 0.042 4-5-10 0.121 15 9 8 8 7 382 0.059 19 5-7-12 0.046 13 5-7-12 0.087 16 10 9 9 8 550 0.066 25 8-12-18 0.049 22 6-10-17 0.101 23 12 11 10 10 748 0.046 23 7-11-16 0.032 21 7-11-17 0.067 24 15 15 14 14 800 0.040 157 0.070 17 5-8-11 0.047 12 4-6-9 0.105 19 6 6 5 4 279 0.075 16 4-6-11 0.055 13 4-6-11 0.158 20 10 9 9 8 436 0.077 23 5-8-13 0.060 18 5-8-13 0.114 21 11 10 10 9 628 0.086 27 9-14-20 0.064 25 7-11-18 0.132 27 13 13 12 12 855 0.061 26 8-12-17 0.042 25 8-12-18 0.088 28 17 17 16 16 Performance notes appear at end of performance data 900 1000 1200 0.051 0.062 0.090 177 196 236 0.088 0.109 0.156 21 24 30 6-8-12 6-9-12 8-10-14 0.049 0.073 0.105 17 20 27 5-7-10 5-7-10 6-8-11 0.132 0.164 0.235 22 25 31 7 8 10 7 8 9 6 7 8 5 6 7 314 349 419 0.095 0.117 0.168 20 24 30 5-7-12 5-8-12 6-9-13 0.070 0.086 0.124 17 21 27 5-7-12 5-8-12 6-9-13 0.200 0.247 0.355 25 28 35 11 12 14 10 11 13 9 10 12 9 10 12 491 545 654 0.098 0.121 0.174 27 30 35 6-9-13 6-10-14 8-11-16 0.076 0.094 0.136 23 27 34 6-9-13 6-10-14 8-11-16 0.144 0.178 0.256 27 31 39 12 13 15 11 12 14 10 11 13 10 11 13 707 785 942 0.109 0.134 0.194 30 32 35 10-15-21 11-16-22 14-17-24 0.081 0.100 0.144 28 30 34 8-13-19 9-14-20 11-16-22 0.167 0.206 0.297 29 32 36 15 16 18 14 15 17 13 14 17 13 14 16 962 1069 1283 0.077 0.095 0.137 30 33 38 9-13-18 10-14-19 12-15-21 0.053 0.066 0.094 28 31 36 9-14-19 10-14-20 9-13-19 0.112 0.138 0.198 31 34 39 19 21 24 19 20 24 18 20 24 18 19 23 1400 0.122 275 0.213 34 8-10-15 0.143 33 7-9-12 0.321 35 12 11 10 9 489 0.229 35 7-10-15 0.168 33 7-10-15 0.484 41 16 15 14 14 764 0.237 40 9-12-17 0.185 39 9-12-17 0.348 46 17 16 15 15 1100 0.263 38 15-18-26 0.196 37 13-17-24 0.404 40 21 20 20 19 1497 0.186 42 13-16-23 0.129 40 14-17-24 0.270 43 28 28 28 27 F PERFORMANCE DATA 12" Neck Velocity, fpm Velocity Pressure, In WG Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) 50 fpm Vert. Proj., Ft @ 10B F Heating 50 fpm Vert. Proj., Ft @ 20B F Heating 50 fpm Vert. Proj., Ft @ 30B F Heating 50 fpm Vert. Proj., Ft @ 40B F Heating Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) 50 fpm Vert. Proj., Ft @ 10B F Heating 50 fpm Vert. Proj., Ft @ 20B F Heating 50 fpm Vert. Proj., Ft @ 30B F Heating 50 fpm Vert. Proj., Ft @ 40B F Heating Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) 50 fpm Vert. Proj., Ft @ 10B F Heating 50 fpm Vert. Proj., Ft @ 20B F Heating 50 fpm Vert. Proj., Ft @ 30B F Heating 50 fpm Vert. Proj., Ft @ 40B F Heating Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) 50 fpm Vert. Proj., Ft @ 10B F Heating 50 fpm Vert. Proj., Ft @ 20B F Heating 50 fpm Vert. Proj., Ft @ 30B F Heating 50 fpm Vert. Proj., Ft @ 40B F Heating Air Flow, cfm Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure, In WG NC ( Noise Criteria) Horizontal Throw, Ft Total Pressure NC ( Noise Criteria) 50 fpm Vert. Proj., Ft @ 10B F Heating 50 fpm Vert. Proj., Ft @ 20B F Heating 50 fpm Vert. Proj., Ft @ 30B F Heating 50 fpm Vert. Proj., Ft @ 40B F Heating Redefine your comfort zone. ™ | www.titus-hvac.com R-OMNI / ARCHITECTURAL CEILING / ROUND PLAQUE F133 Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PERFORMANCE DATA F F134 F134 • All data, except vertical projection, was obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006 • Vertical projection data was calculated from computational fluid dynamics models • All data based upon supply performance • All pressures are in inches of water • Diffusers are shipped in center position • To obtain static pressure, subtract the velocity pressure from the total pressure • The negative static pressure for return performance is equal to the total pressure of supply at the same cfm diffusers • Return NC is 2 NC higher than supply NC at the same cfm • Horizontal throw values are for terminal velocities of 150, 100 and 50 fpm under isothermal conditions • If mounted on an exposed duct, the throw values are 70% of those listed in the table • Vertical projections are for terminal velocity of 50 fpm in heating mode • NC values based on a room absorption of 10 dB • Dash (-) in space indicates NC value less than 10 diffusers Architectural Ceiling Diffusers (continued) Redefine your comfort zone. ™ | www.titus-hvac.com OMNI-RS • The OMNI-RS diffuser is designed for an architectural look and engineered performance. Its clean, unobtrusive lines harmonize with ceiling systems without sacrificing performance. • The unique round plaque face/square panel combination delivers a 360B tight horizontal air pattern without excessive noise or pressure drop • The OMNI-RS provides excellent performance in variable air volume systems • The OMNI-RS is constructed of heavy gauge steel OMNI-RS metric sizes AVAILABLE MODEL: retrofit MRI compatible woodgrains open ceiling See website for Specifications F OMNI-RS / Steel FINISH Standard Finish - #26 White OVERVIEW Square Backpan / Round Plaque / Steel The OMNI-RS diffuser is designed for an architectural look and engineered performance. The unique round plaque face/square panel combination delivers a 360B tight horizontal air pattern without excessive noise or pressure drop. It provides excellent performance in variable air volume systems. OMNI-RS F135 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS OMNI-RS UNIT DIMENSIONS Border Type 3 (Lay-in) 1⅞ D 2 315/16 ½ 13 ½ Ceiling Module Size F Border Type 1 (Surface Mount) ½" to ⅞" 3/16" 1⅛" DIMENSIONS Note: Diffuser will be shipped with Border 3. A TRM frame will be provided for surface mounting. F136 F136 Module Size 24 x 24 Nominal Duct Size D 6 57/8 8 77/8 10 97/8 12 11½ All dimensions are in inches diffusers PERFORMANCE DATA 6" Dia. 8" Dia. 24 x 24 Module 10" Dia. 12" Dia. Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw 300 0.006 59 0.017 1-2-5 105 0.025 2-4-8 164 0.035 2-6-10 216 0.037 3-5-10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information. 400 0.010 80 0.031 1-3-6 140 0.045 2-5-9 218 0.062 3-7-11 289 0.066 5-7-12 500 0.016 98 0.048 2-4-7 175 0.07 3-6-10 273 0.096 4-8-12 361 0.104 6-8-13 600 0.022 118 0.070 12 2-4-7 209 0.101 12 4-7-10 327 0.139 12 5-9-13 433 0.149 13 7-10-14 700 0.031 137 0.095 16 3-5-8 244 0.138 16 5-8-11 382 0.189 16 6-10-14 505 0.203 17 8-11-15 800 0.040 157 0.124 21 4-6-9 279 0.180 21 6-9-12 436 0.247 21 7-12-15 577 0.265 22 10-12-17 1000 0.062 196 0.194 31 5-7-10 349 0.279 31 7-10-14 545 0.375 32 9-13-17 721 0.423 32 12-15-19 • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure Redefine your comfort zone. ™ | www.titus-hvac.com OMNI-RS / ARCHITECTURAL CEILING / SQUARE BACKPAN / ROUND PLAQUE F PERFORMANCE DATA F137 Redefine your comfort zone. ™ | www.titus-hvac.com Architectural Ceiling Diffusers (continued) diffusers DAT • The Titus DAT ceiling diffuser satisfies architectural as well as engineering criteria. Its smooth plaque face allows the diffuser to harmonize with the ceiling system, without sacrificing performance. • The deep backpan of the DAT was designed to ensure optimum performance without excessive noise or pressure drop • The DAT diffuser is an excellent choice for variable air volume systems. The air pattern remains tight and horizontal for effective room air distribution, even when the volume varies over a wide range. • Fits 24 x 24" ceiling grids • Choice of one, two or three slots. Slot width is 1½". • Diffuser has a round neck with a deep collar for easy connection to flexible duct DAT • Core is easily removable from face of the diffuser • Material is heavy gauge steel F AVAILABLE MODEL: DAT / Supply FINISH Standard Finish - #26 White OVERVIEW Louvered Plaque / Steel DAT The DAT ceiling diffuser satisfies architectural as well as engineering criteria. Its smooth plaque face allows the diffuser to harmonize with the ceiling system, without sacrificing performance. The deep backpan is designed for optimum performance without excessive noise or pressure drop, and is great for variable air volume applications. F138 F138 See website for Specifications diffusers DIMENSIONS Border Type 3 (Lay-in) B 1½" 6" Redefine your comfort zone. ™ | www.titus-hvac.com DAT UNIT DIMENSIONS C 23¾" Ceiling Module Number of Slots 1 24 x 24 Nominal Round Duct Plaque Face C Size B 6, 8, 10 19 2 6, 8, 10, 12 16 3 8, 10, 12, 14 13 F DIMENSIONS All dimensions are in inches F139 diffusers DAT / ARCHITECTURAL CEILING / LOUVERED PLAQUE 6" Round Neck 24 X 24, 1-slot Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA 8" Round Neck 10" Round Neck F 24 X 24, 2-slot 6" Round Neck 8" Round Neck 10" Round Neck 12" Round Neck F140 F140 24 X 24, 3-slot PERFORMANCE DATA 8" Round Neck 10" Round Neck 12" Round Neck 14" Round Neck Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) Air Flow, cfm Neck Velocity Velocity Pressure, in. WG Total Pressure, in. WG Throw Feet NC (Noise Criteria) 79 400 0.010 0.022 2-3-5 140 400 0.010 0.027 3-5-9 15 109 200 0.003 0.008 2-4-7 59 300 0.006 0.010 0-1-3 140 400 0.010 0.022 2-3-7 218 400 0.010 0.025 3-5-10 12 236 300 0.006 0.016 4-6-11 140 400 0.010 0.019 1-2-5 164 300 0.006 0.012 1-3-6 236 300 0.006 0.014 3-5-9 321 300 0.006 0.015 4-6-13 - 99 500 0.016 0.035 2-3-7 13 166 475 0.014 0.038 4-6-11 19 150 275 0.005 0.015 3-5-10 94 475 0.014 0.025 1-2-4 192 550 0.019 0.041 3-5-9 14 273 500 0.016 0.039 4-7-13 17 314 400 0.010 0.028 5-8-15 16 192 550 0.019 0.036 2-4-8 232 425 0.011 0.025 3-5-9 314 400 0.010 0.025 4-6-12 11 428 400 0.010 0.027 6-8-17 15 • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for throw calculation data. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB 118 600 0.022 0.051 3-4-8 18 192 550 0.019 0.051 4-7-13 23 191 350 0.008 0.024 4-6-13 17 128 650 0.026 0.047 2-3-6 12 244 700 0.031 0.066 4-6-12 21 327 600 0.022 0.056 5-8-16 22 393 500 0.016 0.044 6-9-18 22 244 700 0.031 0.058 3-5-10 16 300 550 0.019 0.041 4-6-12 15 393 500 0.016 0.039 5-8-15 17 535 500 0.016 0.043 7-10-21 21 138 700 0.031 0.069 3-5-9 22 218 625 0.024 0.066 5-7-14 26 232 425 0.011 0.036 5-8-14 22 163 825 0.042 0.076 2-4-8 18 297 850 0.045 0.097 5-7-14 26 382 700 0.031 0.077 6-9-18 26 471 600 0.022 0.064 8-11-20 27 297 850 0.045 0.085 4-6-12 21 368 675 0.028 0.062 5-7-14 20 471 600 0.022 0.056 6-9-18 22 641 600 0.022 0.062 8-13-23 26 158 800 0.040 0.090 4-5-11 26 244 700 0.031 0.083 6-8-14 29 273 500 0.016 0.049 6-9-15 26 197 1000 0.062 0.111 3-5-9 23 349 1000 0.062 0.135 6-8-17 30 436 800 0.040 0.100 7-10-19 30 550 700 0.031 0.087 9-13-22 31 349 1000 0.062 0.118 5-7-14 25 436 800 0.040 0.087 6-9-17 25 550 700 0.031 0.076 7-11-22 26 748 700 0.031 0.084 10-15-25 30 177 900 0.051 0.114 4-6-12 29 270 775 0.037 0.102 6-9-15 32 313 575 0.021 0.065 7-11-16 30 231 1175 0.086 0.154 4-6-11 27 401 1150 0.082 0.178 6-10-18 34 491 900 0.051 0.127 8-12-20 33 628 800 0.040 0.113 10-15-23 34 401 1150 0.082 0.156 5-8-16 29 504 925 0.053 0.117 7-10-20 29 628 800 0.040 0.099 8-12-23 29 855 800 0.040 0.110 11-17-27 33 197 1000 0.062 0.140 4-7-13 32 297 850 0.045 0.123 7-10-16 34 354 650 0.026 0.084 8-12-17 33 266 1350 0.114 0.203 4-6-13 31 454 1300 0.105 0.228 7-11-20 37 545 1000 0.062 0.157 9-13-21 36 707 900 0.051 0.143 11-17-24 37 454 1300 0.105 0.199 6-9-18 32 572 1050 0.069 0.151 7-11-22 32 707 900 0.051 0.125 9-14-24 32 962 900 0.051 0.139 13-19-29 36 236 1200 0.090 0.202 5-8-14 36 323 925 0.053 0.146 7-11-17 37 395 725 0.033 0.104 9-13-18 36 300 1525 0.145 0.259 5-7-14 34 506 1450 0.131 0.283 8-12-21 40 600 1100 0.075 0.189 10-14-23 38 785 1000 0.062 0.177 13-18-26 40 506 1450 0.131 0.247 7-10-20 35 640 1175 0.086 0.189 8-13-23 35 785 1000 0.062 0.154 10-15-26 35 1069 1000 0.062 0.171 14-21-30 39 276 1400 0.122 0.275 6-9-15 41 349 1000 0.062 0.170 8-12-17 39 436 800 0.040 0.127 10-14-19 38 335 1700 0.180 0.321 5-8-16 37 558 1600 0.160 0.345 9-13-22 43 654 1200 0.090 0.225 10-16-24 41 864 1100 0.075 0.214 14-19-27 43 558 1600 0.160 0.301 7-11-22 37 709 1300 0.105 0.231 9-14-24 38 864 1100 0.075 0.187 11-17-27 38 1176 1100 0.075 0.207 15-22-32 42 • Dash (-) in space indicates NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 Architectural Ceiling Diffusers (continued) diffusers • The Titus DAT-NT ceiling diffuser satisfies architectural as well as engineering criteria. Its smooth plaque face allows the diffuser to harmonize with the ceiling system, without sacrificing performance. • The deep backpan of the DAT-NT was designed to ensure optimum performance without excessive noise or pressure drop • The DAT-NT diffuser is an excellent choice for variable air volume systems. The air pattern remains tight and horizontal for effective room air distribution, even when the volume varies over a wide range. • Compatible with 24 x 24" modules for regressed narrow tee ceiling systems • Choice of one, two or three slots. Slot width is 1½". • Diffuser has a round neck with a deep collar for easy connection to flexible duct DAT-NT Redefine your comfort zone. ™ | www.titus-hvac.com DAT-NT • Core is easily removable from face of the diffuser • Material is heavy gauge steel AVAILABLE MODEL: See website for Specifications F DAT-NT / Supply FINISH Standard Finish - #26 White OVERVIEW Louvered Plaque / Narrow Tee / Steel The DAT-NT ceiling diffuser satisfies architectural as well as engineering criteria. Its smooth plaque face allows the diffuser to harmonize with the ceiling system, without sacrificing performance. The deep backpan is designed for optimum performance without excessive noise or pressure drop, and is great for variable air volume applications. Performance notes appear at end of performance data DAT-NT F141 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS DAT-NT UNIT DIMENSIONS DAT-NT 23¾" B 1½" 6" F D 23⅜" Ceiling Module Nominal Round Duct Plaque Face C Size B 1 6, 8, 10 19 2 6, 8, 10, 12 16 3 8, 10, 12, 14 13 DIMENSIONS 24 x 24 Number of Slots F142 F142 All dimensions are in inches diffusers Architectural Ceiling Diffusers (continued) Redefine your comfort zone. ™ | www.titus-hvac.com MB-30 / MBR-30 • Titus Modu-Bloc diffusers, Models MB-30 and MBR-30, are designed to be visually pleasing while providing superior performance • Designed so that a ceiling tile (by others) can be field cut and inserted in the face of the diffuser. The center panel of Model MB30 matches the surrounding ceiling tiles. This results in a smooth, clean appearance that blends with the ceiling. • Supply diffuser delivers a one-, two-, three- or four-way horizontal throw or a vertical throw. With horizontal throw, the blanket of air is held tight against the ceiling even with varying volumes of air, making the MB-30 an excellent choice for VAV systems. • Uniform, unbroken flow pattern guards against ceiling smudging • Discharge patterns are individually adjustable for each slot, resulting in combinations that fit the distribution requirements of the room MB-30 / MBR-30 • Fits 24 x 24" ceiling grid energy solutions See website for Specifications AVAILABLE MODELS: MB-30 / Supply MBR-30 / Return MBI-30 / Supply / Internal Insulation open ceiling F Inlet View Duct (by others) FINISH Standard Finish - #26 White OVERVIEW ModuBloc Series Titus Modu-Bloc diffusers are designed to be visually pleasing while providing superior performance. The Modu-Bloc is constructed so that a ceiling tile can be field cut and inserted in the face of the diffuser. This results in a smooth, clean appearance that blends with the ceiling. Backpan of MB-30 ADDITIONAL FEATURES T-bar by others MB-30 Ceiling Tile Center Panel (by others) T-bar by others MB-30 / MBR-30 • Discharge directions are adjustable through 180°. Titus Modulinear pattern controllers in each slot controls not only the direction of airflow, but also the volume of air. • Choice of one, two, three or four slots • Choice of ¾- or 1" slots • Supply diffuser has a round neck with a deep collar for easy connection to flexible duct • Optional external insulation on the supply diffuser (Model MBI-30) • Model MBR-30 return is similar to the supply diffuser in appearance, but is built without the pattern controllers and backpan. Designed for plenum return, the MBR-30 has a light shield to prevent see-through and to block stray light from fixtures in the plenum. • Material is extruded aluminum face. Steel backpan or light shield, steel pattern controllers F143 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS MODU-BLOC MB-30 DIMENSIONS 23¾" 233/16" 6¼" Inlet Diameter Nominal minus ⅛" 8¼" Slot Width 23¾" Slot Width 1 Slot 233/16" 1⅜" 3 Slots 1⅜" 8¼" 6¼" Slot Width ½" Handle for removing backpan for tile installation FIELD INSTALLATION OF CENTER TILE F 1⅜" 1⅜" Slot Width 2 Slots 4 Slots CENTER PANEL CEILING TILE - CUTTING DIMENSIONS Slot Width Number of Slots ¾" 1" 1 197/8 x 197/8 193/8 x 193/8 8” 2 16 /8 x 16 /8 15 /8 x 15 /8 10” 3 137/8 x 137/8 123/8 x 123/8 12” 4 10 /8 x 10 /8 8 /8 x 8 /8 14” Clip 7 7 7 7 Available Inlet Sizes 7 7 7 7 Handle DIMENSIONS DISCHARGE PATTERNS - FIELD ADJUSTABLE 1-Way Horizontal F144 F144 Dampered Horizontal 2-Way Corner Angular Down 2-Way Opposite Vertical 3-Way Fully Dampered All dimensions are in inches 4-Way 1-Way Vertical & Horizontal diffusers DIMENSIONS 23¾" 23¼" 413/16" 413/16" Slot Width 23¼" 23¾" Slot Width 1 Slot Top View 3 Slots Upper Surface of Light Shield 413/16" 413/16" Slot Width Slot Width 2 Slots FIELD INSTALLATION OF CENTER TILE 4 Slots Redefine your comfort zone. ™ | www.titus-hvac.com MODU-BLOC MBR-30 DIMENSIONS CENTER PANEL CEILING TILE - CUTTING DIMENSIONS Light Shield Slot Width Number of Slots ¾" 1 19 /8 x 19 /8 19 /8 x 193/8 2 16 /8 x 16 /8 157/8 x 157/8 3 13 /8 x 13 /8 12 /8 x 12 /8 4 107/8 x 107/8 87/8 x 87/8 7 7 7 1" 7 7 7 3 3 3 F Ceiling Tile (by others) Cut as at right Frame S Clip Return View Return Airflow DIMENSIONS Light Shield of MBR-30 return S Clips T-bars by others All dimensions are in inches F145 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F MB-30 ¾" SLOT WIDTH SUPPLY - 1-, 2-, 3-, OR 4-WAY BLOW PATTERN 1-Slot 8" Dia. 2-Slot 8" Dia. 2-Slot 10" Dia. 3-Slot 8" Dia. 3-Slot 10" Dia. 3-Slot 12" Dia. 4-Slot 8" Dia. 10" Dia. 4-Slot 12" Dia. 4-Slot 14" Dia. 300 0.006 105 0.047 19 4-6-12 105 0.018 2-4-9 164 0.035 16 4-7-14 105 0.011 1-2-7 164 0.018 17 3-6-12 236 0.031 23 5-8-17 105 0.009 1-2-7 164 0.014 13 2-4-11 236 0.023 20 4-8-15 321 0.037 25 7-10-21 400 0.010 140 0.084 25 5-8-16 140 0.032 14 3-6-12 218 0.063 22 6-9-18 140 0.019 15 2-4-10 218 0.032 23 5-8-16 314 0.055 29 7-11-22 140 0.016 12 1-3-9 218 0.025 20 3-7-14 314 0.040 26 7-10-20 428 0.066 31 9-14-28 500 0.016 175 0.131 30 7-10-20 175 0.049 19 5-7-15 273 0.098 27 8-11-23 175 0.030 20 3-6-12 273 0.050 28 7-10-20 393 0.086 34 9-14-28 175 0.025 17 2-5-11 273 0.038 24 5-9-18 393 0.063 31 8-13-25 535 0.104 36 12-17-35 600 0.022 209 0.188 34 8-12-24 209 0.071 23 6-9-18 327 0.141 31 9-14-28 209 0.043 24 4-7-15 327 0.071 32 8-12-23 471 0.124 38 11-17-34 209 0.036 21 3-7-14 327 0.055 28 7-11-21 471 0.091 35 10-15-31 641 0.149 40 14-21-42 700 0.031 244 0.257 37 9-14-28 244 0.097 27 7-10-21 382 0.192 34 11-16-32 244 0.058 27 6-9-17 382 0.097 35 9-14-27 550 0.169 41 13-20-39 244 0.049 24 4-8-16 382 0.075 32 8-12-25 550 0.124 38 12-18-36 748 0.203 43 16-24-49 PERFORMANCE DATA 4-Slot Neck Velocity Velocity Pressure Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw F146 F146 Performance notes appear at end of performance data 800 0.040 279 0.335 40 11-16-32 279 0.126 29 8-12-24 436 0.250 37 12-18-37 279 0.076 30 7-10-20 436 0.127 38 10-16-31 628 0.221 44 15-22-45 279 0.064 27 6-9-18 436 0.098 35 9-14-28 628 0.161 41 14-20-41 855 0.265 46 18-28-55 900 0.051 314 0.424 43 12-18-35 314 0.160 32 9-13-26 491 0.317 40 14-21-41 314 0.096 33 7-11-22 491 0.161 40 12-18-35 707 0.279 47 17-25-51 314 0.081 29 7-10-20 491 0.125 37 11-16-32 707 0.204 43 15-23-46 962 0.335 49 21-31-61 1000 0.062 349 0.524 45 13-20-37 349 0.197 34 10-15-29 545 0.391 42 15-23-46 349 0.118 35 8-12-25 545 0.198 43 13-20-39 785 0.345 49 19-28-55 349 0.100 32 8-11-23 545 0.154 39 12-18-35 785 0.252 46 17-25-51 1069 0.414 51 23-35-65 1100 0.075 384 0.633 47 15-22-39 384 0.238 36 11-16-32 600 0.474 44 17-25-48 384 0.143 37 9-14-27 600 0.240 45 14-21-43 864 0.417 51 21-31-58 384 0.121 34 8-12-25 600 0.186 41 13-19-39 864 0.305 48 19-28-56 1176 0.501 53 25-38-68 diffusers PERFORMANCE DATA 1-Slot 8" Dia. 2-Slot 8" Dia. 2-Slot 10" Dia. 3-Slot 8" Dia. 3-Slot 10" Dia. 3-Slot 12" Dia. 4-Slot 8" Dia. 4-Slot 10" Dia. 4-Slot 12" Dia. 4-Slot 14" Dia. Neck Velocity Velocity Pressure Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw Airflow,cfm Total Pressure NC (Noise Criteria) Throw 300 0.006 105 0.033 15 3-5-10 105 0.014 1-3-8 164 0.026 12 3-6-12 105 0.009 1-2-7 164 0.015 14 2-4-10 236 0.024 20 4-8-15 105 0.008 1-1-5 164 0.012 1-3-10 236 0.019 17 3-7-14 321 0.030 22 5-9-19 400 0.010 140 0.058 21 5-7-14 140 0.025 2-5-10 218 0.046 19 5-8-16 140 0.017 12 1-3-9 218 0.026 20 3-7-14 314 0.043 26 7-10-20 140 0.015 1-2-8 218 0.021 17 2-6-13 314 0.033 23 5-9-18 428 0.053 28 8-12-25 500 0.016 175 0.091 26 6-9-17 175 0.039 16 3-6-13 273 0.072 23 7-10-20 175 0.026 17 2-5-11 273 0.040 25 5-9-17 393 0.067 31 8-13-25 175 0.023 14 2-4-10 273 0.033 22 4-8-16 393 0.052 28 8-11-23 535 0.083 33 10-16-31 700 0.031 244 0.178 33 8-12-24 244 0.076 23 6-9-18 382 0.142 31 9-14-28 244 0.051 24 4-8-16 382 0.079 32 8-12-24 550 0.132 38 12-18-35 244 0.045 21 3-7-14 382 0.065 29 7-11-22 550 0.102 35 11-16-32 748 0.163 41 15-22-44 800 0.040 279 0.233 36 9-14-28 279 0.100 26 7-10-21 436 0.185 33 11-16-32 279 0.066 27 5-9-18 436 0.104 35 9-14-28 628 0.172 41 13-20-40 279 0.058 24 4-8-16 436 0.085 32 8-13-25 628 0.133 38 12-18-37 855 0.212 43 17-25-50 900 0.051 314 0.295 38 10-16-31 314 0.126 28 8-12-23 491 0.235 36 12-18-36 314 0.084 30 7-10-20 491 0.131 37 10-16-31 707 0.218 44 15-23-45 314 0.074 26 5-9-18 491 0.107 34 10-14-29 707 0.168 41 14-21-41 962 0.269 46 19-28-56 1000 0.062 349 0.364 41 12-17-35 349 0.155 30 9-13-26 545 0.290 38 13-20-40 349 0.103 32 7-11-22 545 0.162 40 12-17-35 785 0.269 46 17-25-50 349 0.091 29 6-10-20 545 0.132 36 11-16-32 785 0.208 43 15-23-46 1069 0.332 48 21-31-62 1100 0.075 384 0.441 43 13-19-38 384 0.188 33 9-14-28 600 0.351 40 15-22-44 384 0.125 34 8-12-24 600 0.196 42 13-19-38 864 0.325 48 18-28-55 384 0.110 31 7-11-22 600 0.160 39 12-18-35 864 0.251 45 17-25-50 1176 0.401 50 23-34-68 • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure F PERFORMANCE DATA • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section Engineering Guidelines for additional information. • If the diffuser is mounted on an exposed duct, the throw values are 70% of those listed in the table • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section Engineering Guidelines for the catalog throw data information. 600 0.022 209 0.131 30 7-10-21 209 0.056 20 5-8-15 327 0.104 27 8-12-24 209 0.037 21 3-7-13 327 0.058 29 7-10-21 471 0.097 35 10-15-30 209 0.033 18 2-5-12 327 0.048 26 6-10-19 471 0.075 32 9-14-28 641 0.119 37 12-19-37 Redefine your comfort zone. ™ | www.titus-hvac.com MB-30 1" SLOT WIDTH SUPPLY - 1-, 2-, 3-, OR 4-WAY BLOW PATTERN F147 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA MBR-30 RETURN WITH LIGHT SHIELD Size 1 Slot ¾" Wide Slot 2 Slot 3 Slot 4 Slot Size 1 Slot 1" Wide Slot 2 Slot 3 Slot 4 Slot PERFORMANCE DATA F F148 F148 Negative Static Pressure Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Negative Static Pressure Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) Airflow, cfm NC (Noise Criteria) • Static pressures are in negative inches of water • NC based on room absorption of 10 dB re 10-12 watts • Data obtained per ANSI/ASHRAE Standard 70-2006 0.007 75 145 210 270 0.018 147 280 400 507 - 0.028 150 290 12 420 15 540 17 0.04 220 420 16 600 19 760 21 0.063 225 16 435 20 630 21 810 22 0.07 293 17 560 24 800 27 1013 29 0.108 300 24 580 28 840 29 1080 30 0.108 367 23 700 30 1000 33 1267 35 0.17 375 30 725 34 1050 35 1350 36 0.16 440 28 840 35 1200 38 1520 40 0.25 450 35 870 39 1260 40 1620 40 0.215 513 32 980 39 1400 42 1773 44 0.345 525 39 1015 43 1470 44 1890 45 0.28 586 36 1120 43 1600 46 2026 48 0.45 600 43 1160 47 1680 48 2160 49 0.45 733 42 1400 49 2000 52 2533 54 Architectural Ceiling Diffusers (continued) diffusers Redefine your comfort zone. ™ | www.titus-hvac.com MB-30-NT / MBR-30-NT • The MB-30-NT and MBR-30-NT Modu-Bloc diffusers are visually pleasing while providing superior performance • The MB-30-NT and MBR-30-NT are designed to allow an existing ceiling tile to be field cut and inserted into the face of the diffuser. This results in a smooth, clean appearance that blends with the ceiling. • Pattern controllers adjust volume and discharge direction of the MB-30-NT • Available in one, two, three, or four slots • Face is aluminum, backpan is steel • Optional internal insulation MB-30-NT / MBR-30-NT energy solutions AVAILABLE MODELS: open ceiling See website for Specifications F MB-30-NT / Supply / ¾" or 1" Slot MBR-30-NT / Return FINISH Standard Finish - #26 White OVERVIEW ModuBloc Series / Narrow Tee For Performance Data and Notes, please refer to pages F146-F148. MB-30-NT / MBR-30-NT Titus Modu-Bloc diffusers are designed to be visually pleasing while providing superior performance. The Modu-Bloc is constructed so that a ceiling tile can be field cut and inserted in the face of the diffuser. This results in a smooth, clean appearance that blends with the ceiling. F149 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS MB-30-NT / MBR-30-NT DIMENSIONS Two-Slot Unit 23¾" 233/16" 13/8" Inlet Diameter Nominal minus 1/8" 6¼" 23¾" 233/16" Slot Width 1 Slot F ½" Handle for removing backpan for tile installation Narrow Tee Detail 17/8" 5/16" DIMENSIONS 9/16" F150 F150 All dimensions are in inches diffusers Architectural Ceiling Diffusers (continued) Redefine your comfort zone. ™ | www.titus-hvac.com TSW • Model TSW ‘Swirl’ ceiling diffuser is designed to provide a tight 360B circular pattern • The TSW provides excellent performance in variable air volume systems • The Inlet collar is 17/8 inches deep to allow for easy duct connection • Optional damper can be adjusted with screwdriver through center hole in diffuser without removing face • The TSW is constructed of heavy gauge steel TSW retrofit AVAILABLE MODEL: See website for Specifications F TSW / Steel FINISH Standard Finish - #26 White OVERVIEW Swirl Face / Steel Titus model TSW, ‘Swirl’, ceiling diffuser is designed to provide a tight 360º circular pattern. It is constructed of heavy gauge steel and provides excellent performance in variable air volume systems. TSW installed in ceiling of a workout facility TSW F151 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS TSW DIMENSIONS Border Type 3 (Lay-in) A 1⅞ 5 22⅞ ¼ F Border Type 1 (Surface Mount) ½" to ⅞" 3 1⅛" /16" DIMENSIONS Note: Diffuser will be shipped with Border 3. A TRM frame will be provided for surface mounting. F152 F152 Available Sizes for Borders 1, 3 Module Size 24 x 24 Nominal Duct Size D 6” Dia. 8” DIa. 10” Dia. 12” Dia. • • • • • Indicates available combination All dimensions are in inches Nominal Inlet A 6” 57/8 8” 77/8 10” 97/8 12” 11½ diffusers PERFORMANCE DATA 6" Dia. 8" Dia. 24 x 24 Module 10" Dia. 12" Dia. Neck Velocity Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw 200 0.002 34 0.004 -0-1-3 70 0.008 -1-2-3 109 0.011 -1-2-4 157 0.023 9 2-3-5 300 0.006 59 0.012 -1-2-4 105 0.017 6 1-2-4 164 0.024 10 2-3-6 239 0.053 18 3-4-8 400 0.010 79 0.022 4 2-3-5 139 0.030 12 2-3-5 218 0.043 16 3-4-8 319 0.094 24 4-5-10 500 0.016 98 0.034 9 2-3-6 174 0.047 17 2-3-7 273 0.068 21 4-5-9 393 0.138 30 5-6-11 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines of this catalog for additional information. • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for the catalog throw data information. 600 0.022 118 0.049 13 3-4-6 209 0.067 21 3-4-7 328 0.114 28 4-6-10 471 0.199 38 5-8-13 700 0.031 138 0.067 16 3-5-7 245 0.094 27 3-5-8 382 0.152 34 5-7-11 550 0.271 41 6-9-14 800 900 1000 1100 1200 0.040 0.051 0.062 0.075 0.090 157 177 197 216 236 0.087 0.106 0.126 0.155 0.188 19 23 26 30 33 3-5-7 4-5-8 4-6-8 5-6-9 5-6-9 279 314 349 384 419 0.117 0.145 0.189 0.218 0.259 31 35 38 40 41 4-5-9 4-6-9 5-7-10 5-7-10 5-7-11 436 491 546 601 655 0.191 0.240 0.297 0.359 0.427 36 40 42 44 46 6-8-12 6-9-13 8-9-13 8-10-14 8-10-14 628 707 785 864 0.354 0.448 0.554 0.670 44 47 49 51 7-10-15 8-11-15 9-12-16 9-12-17 1300 0.105 256 0.219 35 5-7-9 454 0.304 43 6-8-11 • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract the velocity pressure from the total pressure Redefine your comfort zone. ™ | www.titus-hvac.com TSW / SWIRL FACE F PERFORMANCE DATA F153 scan page with Titus AR to reveal hidden content diffusers Redefine your comfort zone. ™ | www.titus-hvac.com Architectural Ceiling Diffusers (continued) Spectrum • Unique architectural face design with center appliqué (nine standard colors) • Customer color matches and company logos available • Appliqué sold separately for field application & retrofit • Hinged removable faceplate is sold separately for retrofit of existing Titus perforated diffusers without removal of backpan or ductwork • Excellent choice for VAV systems. The 4-way air pattern remains tight and horizontal even when the air volume varies over a wide range • 24” x 24” module size with square or round inlets • Border type 1 ships as border type 3 with separate TRM frame for easy mounting in surface mount applications SPECTRUM • Heavy gauge steel construction metric sizes retrofit woodgrains See website for Specifications AVAILABLE MODEL: Spectrum / Steel FINISHES Standard Finish - #26 White Optional Finishes - Special colors and woodgrain finish options OVERVIEW SPECTRUM Square Panel / Architectural Plaque Face The Titus Spectrum diffuser offers a unique alternative when considering ceiling mounted air outlets for architectural building applications. The Spectrum design includes a special arcuate face with center appliqué. The appliqué is available in nine standard colors, as well as custom color matches or company logo. The versatility of these different color schemes provides the architect with a multitude of design options to compliment and enhance a building’s décor. The Spectrum also provides excellent performance by delivering a tight 4-way horizontal air discharge pattern which make is it a great choice for variable air volume applications. In additional to its architectural features, the Spectrum can also be used for retrofit applications with existing Titus perforated diffusers (PCS model). The removable arcuate face can be ordered separately to retrofit existing PCS diffusers in the field by removing the pattern controllers and replacing the face. APPLIQUÉ INFORMATION The Spectrum applique is constructed of matte substrate material with adhesive backing. Each appliqué is individually die cut for consistency and fitted to the pre-formed square embossment in the center of the F154 F154 Spectrum diffuser installed in the ceiling of a conference room Spectrum faceplate after the diffuser is painted. Appliqué specifications include a 0.017” polycarbonate substrate with opacity film, 0.002” adhesive with peel-off backing, and total thickness of 0.019”. COLOR OPTIONS Titus offers nine standard appliqué colors for the Spectrum diffuser as well as custom colors or custom logo’s. For the custom color matching process, two color chips (2” x 2”) must be sent to Titus. For the custom logo process, a high resolution digital image must be supplied to Titus in a 3.96” x 3.96” viewing size. The Titus AR mobile app is available for download on most Android devices and iOS F diffusers DIMENSIONS Redefine your comfort zone. ™ | www.titus-hvac.com SPECTRUM UNIT DIMENSIONS Round Neck F Square Neck BORDER DETAILS Border Type 3 (Lay-In) Round Neck Duct Size (Inches) Border Type 1 (Surface Mount) A 57/8 8 77/8 10 97/8 12 117/8 14 137/8 16 157/8 1½ A B 6x6 5 /8 x 5 /8 8x8 77/8 x 77/8 10 x 10 97/8 x 97/8 12 x 12 11 /8 x 11 /8 14 x 14 137/8 x 137/8 7 7 7 7 1½ DIMENSIONS All dimensions are in inches 1 Square Neck Duct Size (Inches) Frame type 1 is shipped as a frame 3 lay-in with a separate TRM frame B 6 F155 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA SPECTRUM / ROUND INLET / ARCHITECTURAL DIFFUSER Inlet Size 6” Dia. 8” Dia. 24” x 24” Module Size 10” Dia. 12” Dia. 14” Dia. F 16” Dia. Neck Velocity (fpm) Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw 200 0.002 39 0.004 1-1-3 70 0.007 1-1-4 109 0.008 1-2-6 157 0.014 1-2-7 214 0.019 1-2-8 279 0.025 1-2-9 300 0.006 59 0.010 1-2-3 105 0.016 1-3-7 164 0.017 2-3-8 236 0.032 2-4-10 321 0.043 2-5-12 419 0.055 2-5-13 PERFORMANCE DATA 500 0.016 98 0.027 3-4-8 175 0.043 3-6-11 273 0.048 4-7-13 393 0.089 11 5-8-16 535 0.119 12 6-10-19 698 0.154 14 7-11-21 600 0.023 118 0.039 3-5-9 209 0.062 12 4-7-12 327 0.070 15 6-8-14 470 0.128 17 7-10-17 641 0.172 18 8-12-20 838 0.222 20 9-13-23 700 0.030 137 0.053 14 4-6-9 244 0.085 17 5-8-13 382 0.095 20 7-10-16 550 0.175 21 8-12-19 748 0.234 23 9-14-22 977 0.302 24 10-16-25 800 900 1000 1100 0.040 0.051 0.063 0.076 157 177 196 216 0.069 0.088 0.108 0.131 19 22 26 29 4-7-10 5-8-11 6-8-11 6-8-12 279 314 349 384 0.111 0.140 0.173 0.209 22 25 29 32 6-9-13 7-10-14 7-11-15 8-11-16 436 491 545 600 0.124 0.157 0.193 0.234 24 28 31 34 7-11-17 8-13-18 9-14-19 10-14-20 630 710 785 865 0.230 0.290 0.357 0.433 26 29 33 36 9-13-20 10-15-21 11-16-22 12-17-24 855 962 1070 1175 0.305 0.386 0.477 0.576 27 31 34 37 10-16-23 12-18-25 13-19-26 14-19-27 1117 1257 1395 1535 0.394 0.498 0.615 0.745 29 32 36 39 12-18-27 13-20-28 15-21-30 16-22-31 PERFORMANCE NOTES • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006 • Throw values are in feet at terminal velocities of 150, 100 amd 50 fpm at isothermal conditions • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB F156 F156 400 0.010 78 ? 2-3-5 140 0.029 2-4-9 218 0.031 3-5-10 316 0.057 3-6-13 427 0.076 4-7-16 557 0.098 11 5-8-17 • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract velocity pressure from the total pressure diffusers PERFORMANCE DATA Inlet Size 6x6 8x8 24” x 24” Module Size 10 x 10 12 x 12 14 x 14 Neck Velocity (fpm) Velocity Pressure Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw Airflow, cfm Total Pressure NC (Noise Criteria) Throw 200 0.002 50 0.005 1-1-4 89 0.009 1-2-5 139 0.013 1-2-6 200 0.018 1-2-8 272 0.024 1-2-9 300 0.006 75 0.012 1-2-4 133 0.019 1-3-8 208 0.029 2-4-9 300 0.040 2-5-11 408 0.054 2-5-13 400 0.010 100 0.022 2-4-6 177 0.034 2-4-10 277 0.052 3-6-12 400 0.071 4-7-14 541 0.097 5-8-17 500 0.016 125 0.033 3-5-9 222 0.053 4-6-12 347 0.080 5-8-15 500 0.112 12 6-9-18 681 0.150 14 7-11-21 600 0.023 150 0.047 11 4-6-10 267 0.077 14 5-8-13 417 0.115 16 6-9-16 600 0.161 18 8-11-20 817 0.216 19 9-13-23 700 0.030 175 0.064 16 4-7-11 311 0.104 19 6-9-14 485 0.156 21 7-11-18 700 0.219 23 9-13-21 953 0.294 24 10-15-25 800 0.040 200 0.084 20 5-8-11 356 0.136 23 7-10-15 555 0.204 26 8-13-19 800 0.287 27 10-15-23 1090 0.385 29 12-18-26 900 0.051 225 0.106 23 6-9-12 400 0.173 26 8-11-16 625 0.258 29 9-14-20 900 0.363 31 11-17-24 1225 0.485 32 13-20-28 1000 1100 0.063 0.076 250 275 0.131 0.158 27 30 6-9-13 7-9-14 444 489 0.213 0.258 30 33 8-12-17 9-13-18 695 765 0.319 0.386 32 35 10-15-21 12-16-22 1000 1100 0.448 0.542 34 37 13-18-25 14-19-27 1360 1495 0.600 0.727 36 39 15-21-30 16-22-31 PERFORMANCE NOTES • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006 • Throw values are in feet at terminal velocities of 150, 100 amd 50 fpm at isothermal conditions • For an explanation of catalog throw data, see the Engineering Guidelines section of this catalog • NC values based on octave band 2 to 7 sound power levels minus a room absorption of 10 dB • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • All pressures are given in inches of water • To obtain static pressure, subtract velocity pressure from the total pressure Redefine your comfort zone. ™ | www.titus-hvac.com SPECTRUM / SQUARE INLET / ARCHITECTURAL DIFFUSER F PERFORMANCE DATA F157 scan page with Titus AR to reveal hidden content Redefine your comfort zone. ™ | www.titus-hvac.com Square and Rectangular Diffusers TDC / TDCA • Titus Series TDC diffusers handle an unusually large amount of air for a given pressure drop and noise level • Pleasing appearance harmonizes with various architectural details - especially modular ceiling systems • Maintains an unbroken horizontal flow pattern from maximum cfm down to minimum. Excellent performance in variable air volume systems. • In the TDCA and TDCA-AA models, movable vanes, accessible from the face, adjust the discharge pattern from horizontal to vertical • Core is easily removable from the face of the diffuser • Lever operator on the optional Model AG-95 damper allows easy volume adjustment from the face of the diffuser • Extremely flexible, with cores available for 1-, 2-, 3- or 4-way horizontal flow AVAILABLE MODELS: Aluminum Models: TDC-AA / with fixed discharge TDCA-AA / with adjustable discharge FINISH Standard Finish - #26 White OVERVIEW Louvered Face / High Capacity Titus Series TDC diffusers handle an unusually large amount of air for a given pressure drop and noise level. Their pleasing appearance harmonizes with various architectural details, especially in modular ceiling systems. TDC / TDCA • For a uniform face appearance on all neck sizes, specify an 18 x 18" dimension A size and the desired round neck size. This is available in 24 x 24" lay-in module size only. • Material is 22-gauge steel or aluminum with miscellaneous steel components Steel Models: TDC / with fixed discharge TDCA / with adjustable discharge F158 F158 TDC / TDCA See website for Specifications The Titus AR mobile app is available for download on most Android devices and iOS F diffusers diffusers DIMENSIONS Border Type 1 (Surface Mount) Square or Rectangular Neck Ceiling Opening = A plus 3½" Duct Size A Duct Size minus ⅛" 2⅛" ¼" Redefine your comfort zone. ™ | www.titus-hvac.com TDC / TDCA UNIT DIMENSIONS 1½" A plus 59/16" Border Type 1 (Surface Mount) Round Neck F Ceiling Opening = A plus 3½" A Duct Size, diameter Duct Size minus ⅛" 1⅜" 3⅞" 1½" ¼" A plus 59/16" BORDER TYES Border Type 2 (Snap-In) Border Type 3 (Lay-In) 2⅛" 13/16" Ceiling Module 2⅛" Ceiling Module minus ¼" All dimensions are in inches DIMENSIONS Ceiling Module F159 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS BORDER TYES (continued) Border Type 4 (Spline) Border Type 5 (Dropped Face) Duct Size plus ¼" ⅜" ⅜" Border Type 6 (Beveled Drop Face) 2⅛" Duct Size plus 1" 7/16" 2½" Ceiling Module ⅞" * A plus 5½" 2⅛" * A plus 5" Available in Steel Only Note: Std. diffuser is 2½” deep Optional 4” deep diffuser is available AVAILABLE DUCT SIZES - SQUARE AND RECTANGULAR NECKS F Duct Size A Border Types 1, 5, 6 Minimum Maximum Duct Size Duct Size A A 6x6 48 x 48 Available Module Size Min. Duct Size A Border Types 2, 3*, 4 Max. Max. Max. Duct Size A Duct Size A Duct Size A TDC TDC-AA TDCA (Steel) (Alum.) (Steel, Adj.) 6x6 9 x 9* 9 x 9* 6x6 Note: Duct sizes are 12 x 12 24 x 24 6 x 6 21 x 21* 21 x 21* 18 x 18 available in 3” increments 45 x 21* 42 x 21* 18 x 18 only. Maximum duct size 48 x 24 12 x 12 for border 5 is 36” x 36”. * Frame 3 maximum duct size available in 4-way blow only AVAILABLE DUCT SIZES - ROUND NECKS A Duct Size Border Types 1, 5, 6 Dimension Available Round A Duct Size 6x6 6 9x9 6, 8 12 x 12 6, 8, 10, 12 15 x 15 6, 8, 10, 12, 14 18 x 18 6, 8, 10, 12, 14, 16 Border Types 2, 3, 4 Available Module Size 12 x 12 DIMENSIONS Note: Round duct sizes are available only in sizes shown. Border type 5 is only available in steel. F160 F160 24 x 24 6x6 9x9 6x6 9x9 12 x 12 15 x 15 18 x 18 ADJUSTING HORIZONTAL-TO-VERTICAL DISCHARGE PATTERN - TDCA, TDCA-AA Horizontal Pattern Dimension A Vertical Pattern Available Round Duct Size 6 6, 8 6 6, 8 6, 8, 10, 12 6, 8, 10, 12, 14 6, 8, 10, 12, 14, 16 Max. Duct Size A TDCA-AA (Alum., Adj.) 6x6 18 x 18 18 x 18 diffusers DIMENSIONS S1 Square A1 B1 A2 S2 Square B2 Redefine your comfort zone. ™ | www.titus-hvac.com OPTIONAL PATTERNS REMOVING CENTER CORE 1 Way 2 Way 1. Remove shipping clips X E2 F2 X G2 Square Y Y 2 Way Corner A3 E3 X X Y Y 2. Push core sideways against spring X>2Y XPY A3-2 For A3, XPY For A3-2, X>Y, X2Y B3 X X Note: Dimensions X and Y shown here are the proportions of available rectangular duct sizes. Duct sizes are available in 3-inch increments. Dimension X is always the longer dimension for each core option. 3 Way Y Y X>Y, XY, X2Y X=2Y A4 Square B4 X Note: Dimensions X and Y shown here are the proportions of available rectangular duct sizes. Duct sizes are available in 3-inch increments. Dimension X is always the longer dimension for each core option. Redefine your comfort zone. ™ | www.titus-hvac.com Border Type 5 (Dropped Face) Y 4 Way ⅞" F 2⅛" Note: Patterns are shown in plan view (looking down into inlet). * A plus 5" AVAILABLE DUCT SIZES - SQUARE AND RECTANGULAR NECKS Duct Size A Border Types 1, 5, 6 Minimum Maximum Duct Size Duct Size A A 6x6 48 x 48 (note 2) Border Types 2, 3, 4 Available Minimum Maximum Module Duct Size A Duct Size A Size 12 x 12 24 x 24 6x6 6x6 48 x 24 12 x 12 6x6 18 x 18 42 x 18 (note 3) Note 1: Duct sizes are available in 3” increments only Note 2: Maximum duct size for border 5 is 36” x 36”. Maximum duct size for TDV-AA is 36” x 36”. Note 3: Maximum duct size for TDV-AA is 36” x 18” AVAILABLE DUCT SIZES - ROUND NECKS A Duct Size Border Types 1, 5, 6 Dimension Available Round A Duct Size 6x6 6 9x9 6, 8 12 x 12 6, 8, 10, 12 15 x 15 6, 8, 10, 12, 14 18 x 18 6, 8, 10, 12, 14, 16 Border Types 2, 3, 4 Available Module Size 12 x 12 24 x 24 6x6 6x6 9x9 12 x 12 15 x 15 18 x 18 Available Round Duct Size 6 6 6, 8 6, 8, 10, 12 6, 8, 10, 12, 14 6, 8, 10, 12, 14, 16 REMOVING CENTER CORE 1. Remove shipping clips 2. Push core sideways against spring 3. Hold core securely and allow to drop down DIMENSIONS Note: Round duct sizes are available only in sizes shown Dimension A F179 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F TDV / SQUARE NECK / LOUVERED FACE, INDUCTION VANES / HORIZONTAL DISCHARGE PATTERN 6" x 6" 9" x 9" 12" x 12" 15" x 15" PERFORMANCE DATA 18" x 18" F180 F180 Neck Velocity Velocity Pressure Total Pressure Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. 300 0.006 0.042 75 11 8-10-14 4-6-10 19 3-5-8 28 4-6-9 3-5-8 169 14 11-15-21 6-9-16 42 4-7-12 63 8-10-14 4-7-12 300 16 15-20-28 10-14-26 75 6-10-16 113 11-13-18 6-10-16 469 17 19-25-35 11-17-31 117 7-12-20 176 13-16-23 7-12-20 675 18 23-30-42 11-17-31 169 9-15-24 253 16-20-28 9-15-24 400 0.010 0.075 100 19 9-11-16 5-8-12 25 4-7-9 38 5-7-11 4-7-9 225 21 14-17-24 8-11-18 56 7-10-14 84 9-11-16 7-10-14 400 23 19-23-32 13-19-30 100 9-13-19 150 12-15-21 9-13-19 625 25 23-29-40 15-23-36 156 11-16-23 234 15-19-27 11-16-23 900 26 28-34-48 15-23-36 225 13-20-28 338 18-23-32 13-20-28 • All pressures are in inches of water • Throw velocities given are for isothermal terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB 500 0.016 0.117 125 25 10-13-18 6-10-14 31 6-7-10 47 6-8-12 6-7-10 281 27 16-19-27 10-14-20 70 8-11-16 105 10-13-18 8-11-16 500 29 21-25-36 16-24-34 125 11-15-21 188 14-17-24 11-15-21 781 31 26-32-45 19-29-41 195 14-18-26 293 17-21-30 14-18-26 1125 32 31-38-54 19-29-41 281 17-22-31 422 21-25-36 17-22-31 600 0.022 0.169 150 29 11-14-20 8-10-15 38 7-8-11 56 7-9-13 7-8-11 338 32 17-21-30 11-16-22 84 10-12-17 127 11-14-20 10-12-17 600 34 23-28-39 19-26-37 150 13-16-23 225 15-18-26 13-16-23 938 35 29-35-49 23-31-44 234 16-20-28 352 19-23-33 16-20-28 1350 37 34-42-59 23-31-44 338 20-24-34 506 23-28-39 20-24-34 700 0.031 0.229 175 33 12-15-21 9-11-16 44 7-9-12 66 8-10-14 7-9-12 394 36 18-23-32 13-17-24 98 11-13-18 148 12-15-21 11-13-18 700 38 25-30-43 22-28-40 175 14-17-25 263 16-20-28 14-17-25 1094 39 31-38-53 27-34-48 273 18-22-31 410 20-25-35 18-22-31 1575 41 37-45-64 27-34-48 394 21-26-37 591 24-30-42 21-26-37 800 0.040 0.300 200 37 13-16-23 10-12-17 50 8-9-13 75 9-11-15 8-9-13 450 40 20-24-34 15-18-26 113 11-14-20 169 13-16-23 11-14-20 800 41 26-32-46 25-30-43 200 15-19-26 300 17-21-30 15-19-26 1250 43 33-40-57 30-36-51 313 19-23-33 469 22-27-38 19-23-33 1800 44 39-48-68 30-36-51 450 23-28-39 675 26-32-45 23-28-39 900 0.051 0.379 225 40 14-17-24 10-13-18 56 8-10-14 84 9-11-16 8-10-14 506 43 21-26-36 16-19-27 127 12-15-21 190 14-17-24 12-15-21 900 44 28-34-48 26-32-45 225 16-20-28 338 18-23-32 16-20-28 1406 46 35-43-60 31-38-54 352 20-25-35 527 23-28-40 20-25-35 2025 47 42-51-73 31-38-54 506 24-30-42 759 28-34-48 24-30-42 • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for isothermal conditions Performance notes appear at end of performance data diffusers PERFORMANCE DATA 21" x 21" 24" x 24" 30" x 30" 36" x 36" 48" x 48" 300 0.006 0.042 919 19 27-35-49 13-20-37 230 10-17-28 345 19-23-32 13-20-37 1200 20 31-39-56 15-23-42 300 12-20-32 450 21-26-37 15-23-42 1875 22 38-49-70 19-29-52 469 15-25-40 703 27-33-46 19-29-52 2700 23 46-59-84 23-34-63 675 18-30-48 1013 32-39-55 23-34-63 4800 25 61-79-112 30-46-84 1200 24-40-64 1800 43-52-74 30-46-84 400 0.010 0.075 1225 27 33-40-56 18-27-42 306 16-23-32 459 22-26-37 18-27-42 1600 28 37-46-64 20-30-48 400 18-26-37 600 25-30-43 20-30-48 2500 29 47-57-81 25-38-60 625 22-33-46 938 31-38-53 25-38-60 3600 30 56-68-97 30-46-72 900 27-39-56 1350 37-45-64 30-46-72 6400 32 74-91-129 41-61-97 1600 36-52-74 2400 49-60-85 41-61-97 • All pressures are in inches of water • Throw velocities given are for isothermal terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB 500 0.016 0.117 1531 33 36-45-63 22-33-47 383 19-26-36 574 24-30-42 22-33-47 2000 34 42-51-72 25-38-54 500 22-29-41 750 28-34-48 25-38-54 3125 35 52-64-90 32-48-68 781 28-37-52 1172 34-42-60 32-48-68 4500 36 62-76-108 38-57-81 1125 33-44-62 1688 41-51-72 38-57-81 8000 38 83-102-144 51-76-108 2000 44-59-83 3000 55-68-96 51-76-108 600 0.022 0.169 1838 38 40-49-69 27-37-52 459 23-28-40 689 26-32-46 27-37-52 2400 38 46-56-79 30-42-59 600 26-32-45 900 30-37-52 30-42-59 3750 40 57-70-99 38-52-74 938 33-40-57 1406 38-46-65 38-52-74 5400 41 68-84-118 46-63-89 1350 39-48-68 2025 45-55-78 46-63-89 9600 43 91-112-158 61-84-118 2400 52-64-91 3600 60-74-105 61-84-118 700 0.031 0.229 2144 42 43-53-75 31-40-56 536 25-30-43 804 29-35-49 31-40-56 2800 42 49-60-85 35-45-64 700 28-35-49 1050 33-40-56 35-45-64 4375 44 62-75-107 44-56-80 1094 35-43-61 1641 41-50-71 44-56-80 6300 45 74-90-128 53-68-96 1575 43-52-74 2363 49-60-85 53-68-96 11200 47 99-121-171 71-90-128 2800 57-69-98 4200 65-80-113 71-90-128 800 0.040 0.300 2450 45 46-56-80 35-42-60 613 27-32-46 919 31-37-53 35-42-60 3200 46 53-64-91 39-48-68 800 30-37-52 1200 35-43-60 39-48-68 5000 47 66-81-114 49-60-85 1250 38-46-66 1875 44-53-76 49-60-85 7200 49 79-97-137 59-72-102 1800 45-56-79 2700 52-64-91 59-72-102 12800 51 105-129-182 79-97-137 3200 61-74-105 4800 70-85-121 79-97-137 900 0.051 0.379 2756 48 49-60-85 37-45-63 689 28-34-49 1034 32-40-56 37-45-63 3600 49 56-68-97 42-51-72 900 32-39-56 1350 37-45-64 42-51-72 5625 51 70-86-121 52-64-91 1406 40-49-70 2109 46-57-80 52-64-91 8100 52 84-103-145 63-77-109 2025 48-59-83 3038 55-68-96 63-77-109 14400 54 112-137-193 84-102-145 3600 64-79-111 5400 74-91-128 84-102-145 • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for isothermal conditions Performance notes appear at end of performance data F PERFORMANCE DATA Neck Velocity Velocity Pressure Total Pressure Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Total cfm NC S1-Pattern Throw ft. S2 & G2- Pattern Throw ft. cfm Side A A3-Pattern Side A Throw ft. cfm Side B A3-Pattern Side B Throw ft. A4-Pattern Throw ft. Redefine your comfort zone. ™ | www.titus-hvac.com TDV / SQUARE NECK / LOUVERED FACE, INDUCTION VANES / HORIZONTAL DISCHARGE PATTERN F181 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F TDV / ROUND NECK / LOUVERED FACE, INDUCTION VANES / HORIZONTAL DISCHARGE PATTERN Return Factors -SP = 1.1 TP Add 1 to NC S1 6 x S2&G2 6 A3 6" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 9 x S2&G2 9 A3 6" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 9 x S2&G2 9 A3 8" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 12 x S2&G2 12 A3 8" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC PERFORMANCE DATA S1 12 x S2&G2 12 A3 10" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC F182 F182 S1 12 x S2&G2 12 A3 12" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC 15 x 15 12" Round S1 S2&G2 A3 A4 Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y cfm 78 39 28 19 19 cfm 98 49 37 25 25 cfm 139 70 52 35 35 cfm 174 87 66 44 44 cfm 218 109 82 55 55 cfm 235 118 89 59 59 cfm 314 157 119 79 79 78 0.031 9 Throw 6-9-17 3-5-10 3-4-8 2-3-6 2-3-6 98 0.050 15 Throw 7-11-20 4-6-12 3-5-9 3-4-8 3-4-8 139 0.032 10 Throw 8-12-23 4-6-13 4-5-10 3-4-8 3-4-8 174 0.049 16 Throw 10-15-26 5-8-16 4-7-11 3-5-10 3-5-10 218 0.032 11 Throw 10-15-29 5-8-16 4-7-13 3-5-10 3-5-10 235 0.020 Throw 9-14-27 5-7-15 4-6-12 2-5-10 2-5-10 314 0.035 13 Throw 12-18-35 7-10-20 5-8-15 4-6-13 4-6-13 cfm 98 49 37 25 29 cfm 117 59 44 29 29 cfm 174 87 66 44 44 cfm 209 105 79 52 52 cfm 272 136 103 68 68 cfm 314 157 119 79 79 cfm 392 196 148 98 98 98 0.050 15 Throw 7-11-20 4-6-12 3-5-9 3-4-8 3-4-8 117 0.071 20 Throw 9-13-21 5-7-15 4-6-9 3-5-9 3-5-9 174 0.049 16 Throw 10-15-26 5-8-16 4-7-11 3-5-10 3-5-10 209 0.071 21 Throw 12-18-29 6-10-19 5-8-13 4-6-12 4-6-12 272 0.049 17 Throw 12-18-33 7-10-20 6-8-14 4-6-13 4-6-13 314 0.035 15 Throw 12-18-35 7-10-20 5-8-15 4-6-13 4-6-13 392 0.055 19 Throw 15-23-39 8-12-25 7-10-17 5-8-16 5-8-16 cfm 117 59 44 29 34 cfm 137 69 52 34 34 cfm 209 105 79 52 52 cfm 244 122 92 61 61 cfm 327 164 123 82 82 cfm 392 196 148 98 98 cfm 471 236 178 118 118 • All pressures are in inches of water • Throw velocities given are for isothermal terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB 117 0.071 20 Throw 9-13-21 5-7-15 4-6-9 3-5-9 3-5-9 137 0.097 24 Throw 10-15-23 6-9-16 5-7-10 4-5-10 4-5-10 209 0.071 21 Throw 12-18-29 6-10-19 5-8-13 4-6-12 4-6-12 244 0.097 25 Throw 14-21-31 8-11-22 6-9-14 5-7-14 5-7-14 327 0.072 22 Throw 15-22-36 8-12-24 7-10-16 5-8-16 5-8-16 392 0.055 20 Throw 15-23-39 8-12-25 7-10-17 5-8-16 5-8-16 471 0.079 24 Throw 18-27-43 10-15-30 8-12-19 6-10-19 6-10-19 cfm 137 69 52 34 39 cfm 156 78 59 39 39 cfm 244 122 92 61 61 cfm 279 140 105 70 70 cfm 381 191 144 95 95 cfm 471 236 178 118 118 cfm 549 275 207 137 137 137 0.097 24 Throw 10-15-23 6-9-16 5-7-10 4-5-10 4-5-10 156 0.126 28 Throw 12-17-25 6-10-17 5-8-11 4-6-11 4-6-11 244 0.097 25 Throw 14-21-31 8-11-22 6-9-14 5-7-14 5-7-14 279 0.127 29 Throw 16-23-33 9-13-23 7-10-15 6-8-15 6-8-15 381 0.097 26 Throw 17-26-39 9-14-27 8-12-17 6-9-17 6-9-17 471 0.079 25 Throw 18-27-43 10-15-30 8-12-19 6-10-19 6-10-19 549 0.107 28 Throw 21-32-46 12-17-33 10-14-20 7-11-21 7-11-21 cfm 156 78 59 39 44 cfm 176 88 66 44 44 cfm 279 140 105 70 70 cfm 314 157 119 79 79 cfm 436 218 165 109 109 cfm 549 275 207 137 137 cfm 623 312 235 156 156 156 0.126 28 Throw 12-17-25 6-10-17 5-8-11 4-6-11 4-6-11 176 0.160 31 Throw 13-19-26 7-11-19 6-8-12 5-7-12 5-7-12 279 0.127 29 Throw 16-23-33 9-13-23 7-10-15 6-8-15 6-8-15 314 0.161 32 Throw 18-25-35 10-15-25 8-11-15 6-9-16 6-9-16 447 0.127 30 Throw 20-29-41 11-16-29 9-13-18 7-10-18 7-10-18 549 0.107 29 Throw 21-32-46 12-17-33 10-14-20 7-11-21 7-11-21 623 0.138 32 Throw 24-35-49 13-20-35 11-15-22 8-13-22 8-13-22 cfm 176 88 66 44 54 cfm 215 108 81 54 54 cfm 314 157 119 79 79 cfm 383 192 145 96 96 cfm 490 245 185 123 123 cfm 628 314 237 157 157 cfm 706 353 267 177 177 176 0.160 31 Throw 13-19-26 7-11-19 6-8-12 5-7-12 5-7-12 215 0.239 37 Throw 16-21-29 9-13-21 7-9-13 6-8-13 6-8-13 314 0.161 32 Throw 18-25-35 10-15-25 8-11-15 6-9-16 6-9-16 383 0.239 38 Throw 22-27-39 12-18-27 10-12-17 8-11-17 8-11-17 490 0.161 33 Throw 22-31-44 12-18-31 10-14-19 8-12-20 8-12-20 628 0.140 33 Throw 24-35-50 13-20-35 11-15-22 8-13-22 8-13-22 706 0.177 35 Throw 27-37-53 15-22-37 12-16-23 10-14-23 10-14-23 cfm 215 108 81 54 64 cfm 254 127 96 64 64 cfm 383 192 145 96 96 cfm 453 227 171 113 113 cfm 599 300 226 150 150 cfm 706 353 267 177 177 cfm 863 432 326 216 216 215 0.239 37 Throw 16-21-29 9-13-21 7-9-13 6-8-13 6-8-13 254 0.334 41 Throw 18-22-32 11-16-22 8-10-14 7-10-14 7-10-14 383 0.239 38 Throw 22-27-39 12-18-27 10-12-17 8-11-17 8-11-17 453 0.335 42 Throw 24-30-42 14-21-30 11-13-18 9-13-19 9-13-19 599 0.240 38 Throw 27-34-48 15-22-34 12-15-21 9-14-22 9-14-22 706 0.177 36 Throw 27-37-53 15-22-37 12-16-23 10-14-23 10-14-23 863 0.264 40 Throw 33-41-58 18-27-41 15-18-26 12-17-26 12-17-26 • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for isothermal conditions Performance notes appear at end of performance data diffusers PERFORMANCE DATA Return Factors -SP = 1.1 TP Add 1 to NC S1 15 x S2&G2 15 A3 14" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 18 x S2&G2 18 A3 6" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 18 x S2&G2 18 A3 8" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 18 x S2&G2 18 A3 10" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC S1 18 x S2&G2 18 A3 12" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC 18 x 18 16" Round S1 S2&G2 A3 A4 cfm 320 160 121 80 80 cfm 98 49 37 25 25 174 0.047 16 cfm 174 87 66 44 44 cfm 218 109 82 55 55 cfm 314 157 119 79 79 cfm 427 214 161 107 107 cfm 628 314 237 157 157 320 0.018 5 Throw 10-15-31 6-9-17 4-7-14 3-5-11 3-5-11 98 0.048 15 Throw 7-11-20 4-6-12 3-5-9 3-4-8 3-4-8 Throw 10-15-26 5-8-16 4-7-11 3-5-10 3-5-10 218 0.029 11 Throw 10-15-29 5-8-16 4-7-13 3-5-10 3-5-10 314 0.031 13 Throw 12-18-35 7-10-20 5-8-15 4-6-13 4-6-13 427 0.027 12 Throw 14-21-41 8-11-23 6-9-18 5-7-14 5-7-14 628 0.032 16 Throw 18-27-50 10-15-29 8-12-22 6-9-19 6-9-19 cfm 427 214 161 107 107 cfm 117 59 44 29 29 209 0.067 21 cfm 209 105 79 52 52 cfm 272 136 103 68 68 cfm 392 196 148 98 98 cfm 534 267 202 134 134 cfm 698 349 263 174 174 427 0.032 12 Throw 14-21-41 8-11-23 6-9-18 5-7-14 5-7-14 117 0.069 20 Throw 9-13-21 5-7-15 4-6-9 3-5-9 3-5-9 Throw 12-18-29 6-10-19 5-8-13 4-6-12 4-6-12 272 0.045 17 Throw 12-18-33 7-10-20 6-8-14 4-6-13 4-6-13 392 0.048 19 Throw 15-23-39 8-12-25 7-10-17 5-8-16 5-8-16 534 0.042 18 Throw 17-26-46 9-14-28 8-12-20 6-9-18 6-9-18 698 0.039 19 Throw 20-30-52 11-16-32 9-13-23 7-10-21 7-10-21 cfm 534 267 202 134 134 cfm 137 69 52 34 34 cfm 244 122 92 61 61 cfm 327 164 123 82 82 cfm 471 236 178 118 118 cfm 641 321 242 160 160 cfm 837 419 316 209 209 • All pressures are in inches of water • Throw velocities given are for isothermal terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB 534 0.050 18 Throw 17-26-46 9-14-28 8-12-20 6-9-18 6-9-18 137 0.094 24 Throw 10-15-23 6-9-16 5-7-10 4-5-10 4-5-10 244 0.092 25 Throw 14-21-31 8-11-22 6-9-14 5-7-14 5-7-14 327 0.066 22 Throw 15-22-36 8-12-24 7-10-16 5-8-16 5-8-16 471 0.070 24 Throw 18-27-43 10-15-30 8-12-19 6-10-19 6-10-19 641 0.060 23 Throw 21-31-50 11-17-34 9-14-22 7-11-22 7-11-22 837 0.056 24 Throw 24-35-57 13-19-39 11-16-25 8-12-25 8-12-25 cfm 641 321 242 160 160 cfm 156 78 59 39 39 cfm 279 140 105 70 70 cfm 381 191 144 95 95 cfm 549 275 207 137 137 cfm 748 374 282 187 187 cfm 977 488 369 244 244 641 0.072 23 Throw 21-31-50 11-17-34 9-14-22 7-11-22 7-11-22 156 0.122 28 Throw 12-17-25 6-10-17 5-8-11 4-6-11 4-6-11 279 0.120 29 Throw 16-23-33 9-13-23 7-10-15 6-8-15 6-8-15 381 0.089 26 Throw 17-26-39 9-14-27 8-12-17 6-9-17 6-9-17 549 0.095 28 Throw 21-32-46 12-17-33 10-14-20 7-11-21 7-11-21 748 0.081 27 Throw 24-36-54 13-20-38 11-16-24 8-13-24 8-13-24 977 0.077 28 Throw 28-41-62 15-23-44 12-19-27 10-14-28 10-14-28 cfm 748 374 282 187 187 cfm 176 88 66 44 44 cfm 314 157 119 79 79 cfm 436 218 165 109 109 cfm 623 312 235 156 156 cfm 855 428 323 214 214 cfm 1256 628 474 314 314 748 0.097 27 Throw 24-36-54 13-20-38 11-16-24 8-13-24 8-13-24 176 0.155 31 Throw 13-19-26 7-11-19 6-8-12 5-7-12 5-7-12 314 0.152 32 Throw 18-25-35 10-15-25 8-11-15 6-9-16 6-9-16 436 0.117 30 Throw 20-29-41 11-16-29 9-13-18 7-10-18 7-10-18 623 0.122 32 Throw 24-35-49 13-20-35 11-15-22 8-13-22 8-13-22 855 0.106 31 Throw 28-41-58 15-23-41 12-18-25 10-14-26 10-14-26 1256 0.126 35 Throw 35-50-70 19-29-50 16-22-31 12-19-31 12-19-31 cfm 855 428 323 214 214 cfm 215 108 81 54 54 cfm 383 192 145 96 96 cfm 490 245 185 123 123 cfm 706 353 267 177 177 cfm 962 481 363 241 241 cfm 1530 765 578 383 383 855 0.127 31 Throw 28-41-58 15-23-41 12-18-25 10-14-26 10-14-26 215 0.232 37 Throw 16-21-29 9-13-21 7-9-13 6-8-13 6-8-13 383 0.226 38 Throw 22-27-39 12-18-27 10-12-17 8-11-17 8-11-17 490 0.147 33 Throw 22-31-44 12-18-31 10-14-19 8-12-20 8-12-20 706 0.157 35 Throw 27-37-53 15-22-37 12-16-23 10-14-23 10-14-23 962 0.135 34 Throw 31-43-61 17-26-43 14-19-27 11-16-27 11-16-27 1530 0.188 40 Throw 43-55-77 24-36-55 20-24-34 15-23-35 15-23-35 cfm 863 432 326 216 216 cfm 254 127 96 64 64 cfm 453 227 171 113 113 cfm 599 300 226 150 150 cfm 863 432 326 216 216 cfm 1175 588 444 294 294 cfm 1808 904 683 452 452 863 0.130 31 Throw 28-41-58 15-23-41 13-18-26 10-15-26 10-15-26 254 0.324 41 Throw 18-22-32 11-16-22 8-10-14 7-10-14 7-10-14 453 0.317 42 Throw 24-30-42 14-21-30 11-13-18 9-13-19 9-13-19 599 0.220 38 Throw 27-34-48 15-22-34 12-15-21 9-14-22 9-14-22 863 0.234 40 Throw 33-41-58 18-27-41 15-18-26 12-17-26 12-17-26 1175 0.201 40 Throw 38-48-68 21-31-48 17-21-30 13-20-30 13-20-30 1808 0.262 45 Throw 49-60-84 28-42-60 21-26-37 18-27-38 18-27-38 • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for isothermal conditions Performance notes appear at end of performance data F PERFORMANCE DATA S1 18 x S2&G2 18 A3 14" Round A4 Return Factors -SP = 1.1 TP Add 1 to NC Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Total cfm Total Pressure NC Side X X&Y X Y X&Y Redefine your comfort zone. ™ | www.titus-hvac.com TDV / ROUND NECK / LOUVERED FACE, INDUCTION VANES / HORIZONTAL DISCHARGE PATTERN F183 Redefine your comfort zone. ™ | www.titus-hvac.com Square and Rectangular Ceiling Diffusers (continued) diffusers TDV-NT / TDV-AA-NT • Titus Models TDV-NT and TDV-AA-NT are high capacity ceiling diffusers for use in narrow tee regressed ceilings. These diffusers maintain an unbroken horizontal airflow pattern from maximum cfm down to minimum, which makes them excellent choices for variable air volume application. • They have louvered faces with integrated induction vanes for exceptional air mixing • Slot operator on the optional Model AG-95 damper allows easy volume adjustment (Rectangular necks only) • Core is easily removable from the face of the diffuser • Model TDV-NT is extremely flexible, with cores available for 1-, 2-, 3- or 4-way horizontal flow patterns TDV-NT / TDV-AA-NT • Material heavy gauge steel or aluminum • For a uniform face appearance on all neck sizes, specify an 18 x 18" dimension A size and the desired round neck size. This is available in 24" x 24" lay-in module size only. F AVAILABLE MODELS: TDV-NT / Steel TDV-AA-NT / Aluminum FINISH Standard Finish - #26 White OVERVIEW TDV-NT / TDV-AA-NT Louvered Face / Induction Vanes / Narrow Tee F184 F184 Models TDV-NT and TDV-AA-NT are high capacity ceiling diffusers that are used in narrow tee regressed ceilings. They have louvered faces and integrated induction vanes for exceptional air mixing. These models maintain an unbroken horizontal flow pattern from maximum cfm down to minimum and are an excellent choices for variable air volume applications. See website for Specifications diffusers DIMENSIONS Border Type NT Square Neck Duct Size A Duct Size minus ⅛" 2⅛" ⅜" 1½" 23⅜" 24" Redefine your comfort zone. ™ | www.titus-hvac.com TDV-NT / TDV-AA-NT UNIT DIMENSIONS F DIMENSIONS All dimensions are in inches F185 scan page with Titus AR to reveal hidden content Redefine your comfort zone. ™ | www.titus-hvac.com Square and Rectangular Ceiling Diffusers (continued) TDX / TDX-AA • The Titus TDX and TDX-AA have louvered faces with integrated induction nozzles for exceptional air mixing • Model TDX ia a high capacity ceiling diffuser that maintains a continuous horizontal flow from maximum cfm down to minimum cfm, making it an excellent choice for variable air volume applications • Model TDX is extremely flexible, with cores available for 1-, 2-, 3- or 4-way horizontal flow • Core is easily removable from the face of the diffuser • Slot operator on the optional Model AG-95 damper allows easy volume adjustment (Square necks only) • Material is heavy gauge steel or aluminum with miscellaneous steel components • For a uniform face appearance on all round neck sizes, specify an 18 x 18" dimension ‘A’ size and the desired round neck size. This is available in 24" x 24" lay-in module size only. AVAILABLE MODELS: TDX / TDX-AA See website for Specifications TDX / Steel TDX-AA / Aluminum FINISH Standard Finish - #26 White OVERVIEW Louvered Face / Induction Nozzles TDX / TDX-AA The Titus TDX and TDX-AA have louvered faces with integrated induction nozzles for exceptional air mixing. These models are high capacity ceiling diffusers that maintain a continuous horizontal flow from maximum cfm down to minimum cfm, making them an excellent choice for variable air volume applications. F186 F186 TDX diffuser installed in the ceiling of an office building The Titus AR mobile app is available for download on most Android devices and iOS F diffusers diffusers DIMENSIONS Border Type 1 (Surface Mount) Square Neck Ceiling Opening = A plus 3½" Duct Size A Duct Size minus ⅛" 2⅛" 1½" ¼" Redefine your comfort zone. ™ | www.titus-hvac.com TDX / TDX-AA UNIT DIMENSIONS A plus 59/16" F Border Type 1 (Surface Mount) Round Neck Ceiling Opening = A plus 3½" A Duct Size, diameter Duct Size minus ⅛" 1⅜" 3⅞" 1½" ¼" A plus 59/16" BORDER TYPES Border Type 4 (Spline) Border Type 3 (Lay-In) Ceiling Module ⅜" 2⅛" 2⅛" 13/16" Ceiling Module Ceiling Module minus ¼" All dimensions are in inches ⅜" 2⅛" DIMENSIONS Border Type 2 (Snap-In) Ceiling Module F187 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS Border Type 5 (Dropped Face) Border Type 6 (Bevel Drop Face) Duct Size plus 1" Duct Size plus ¼" ⅞" 2½" 7/16" * A plus 5" * A plus 5½" Note: Standard diffuser is 2½ inches deep AVAILABLE DUCT SIZES - SQUARE AND RECTANGULAR NECKS Border Types 1, 5, 6 Minimum Maximum Duct Size Duct Size A A Duct Size A F 2⅛" 9x9 18 x 18 Border Types 2, 3, 4 Available Module Size 24 x 24 48 x 24 Minimum Duct Size A Maximum Duct Size A 6x6 12 x 12 18 x 18 Note 1: Duct sizes are available in 3” increments only AVAILABLE DUCT SIZES - ROUND NECKS Border Types 1, 5, 6 Dimension Available Round A Duct Size 9x9 6, 8 12 x 12 8, 10, 12 15 x 15 10, 12, 14 18 x 18 12, 14, 16 A Duct Size Note: Round duct sizes are available only in sizes shown Available Module Size 24 x 24 Border Types 2, 3, 4 Dimension A 9x9 12 x 12 15 x 15 18 x 18 Available Round Duct Size 6, 8 8, 10, 12 10, 12, 14 12, 14, 16 Note 1: Round duct sizes are available only in sizes shown REMOVING CENTER CORE DIMENSIONS 1. Remove shipping clips F188 F188 2. Push core sideways against spring OPTIONAL PATTERNS S1 1 Way S2 2 Way G2 2 Way Corner A3 3 Way A4 4 Way 3. Hold core securely and allow to drop down diffusers TDX ADPI Comparison Redefine your comfort zone. ™ | www.titus-hvac.com TDX (High Induction-Circular Pattern) vs. TDV (Cross Pattern) 12 x 12 Core, A4 Pattern (@ 20 BTU/hr. ft2, Floor Heat Load) 100 TDX -- 98% ADPI 95 ADPI [%] 90 TDV -- 92% ADPI 85 80 75 70 65 60 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 T50/L F Note: See ‘ADPI - Air Diffusion Performance Index’ in the Engineering Guidelines section for detailed information TDX ADPI COMPARISON F189 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com TDX , TDV & TDC Comparison Model TDX Square Neck Induction Ratio Delta T = 20BF Model TDV Square Neck Induction Ratio Delta T = 20BF Neck Velocity = 250 fpm Throw [Feet] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Neck Velocity = 250 fpm Induction Ratio [non-DIM] 1.2 1.4 1.9 2.7 3.9 5.5 8.0 11.8 17.7 26.4 39.0 56.6 80.5 112.0 153.0 Throw [Feet] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Troom = 75°F Tsupply = 55°F F Model TDC Square Neck Induction Ratio Delta T = 20BF Neck Velocity = 250 fpm Induction Ratio [non-DIM] 0.4 0.5 0.9 1.2 1.9 2.4 3.6 5.4 8.6 21.6 30.7 38.2 54.0 65.8 80.8 Throw [Feet] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Induction Ratio [non-DIM] 0.1 0.2 0.5 0.7 1.2 1.4 2.1 3.2 5.6 20.0 27.9 32.0 45.2 50.3 56.8 Induction Ratio = [ (Troom - Tsupply)/(Troom - Tthrow)] - 1 (250 cfm, 12 x 12, A4 Pattern) 4-Way TDX, TDV & TDC Comparison Table (250 cfm, 12 x 12 Core, A4 Pattern) T150 - TDX 1' 2' 3' 4' 5' T150 - TDV 6' 7' 8' T150 - TDC Distance from Diffuser Center TDX / TDV / TDC COMPARISON TDX (20BF, DT) 55BF Supply Temp. F190 F190 TDV (20BF, ∆T) 55BF Supply Temp. TDC (20BF, ∆T) 55BF Supply Temp. Notes: ‘x’ Data taken 1” below ceiling. Temperature: Room 75°F, Supply 55°F. 1‘ 2‘ 3‘ 4‘ 5‘ 6‘ 7‘ 8‘ Jet Velocity (fpm) 326 245 200 172 144 123 105 90 Jet Temperature (F) 66 67 68 70 71 73 74 75 Jet Velocity (fpm) 555 427 316 273 231 183 154 119 Jet Temperature (F) 60 62 64 66 68 69 71 72 Jet Velocity (fpm) 564 436 330 292 240 199 161 128 Jet Temperature (F) 57 58 62 63 66 67 69 70 At 55°F supply air, jet temperature from the TDX increases more rapidly than from the TDC and TDV, illustrating the effect of induction performance with this diffuser. Elevation views shown above demonstrate the ability of the TDX to provide greater temperature equalization in the occupied space. This provides for an extremely high ADPI lever which translates into an exceptional comfort for occupants. diffusers PERFORMANCE DATA Inlet Duct Size 9" x 9" 12" x 12" 15" x 15" 18" x 18" Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. 200 0.003 0.027 113 5-7-13 3-5-10 28 3-5-8 42 4-6-10 3-5-7 200 6-9-15 4-6-13 50 3-6-9 75 4-8-11 3-6-9 313 9-12-18 5-8-13 78 4-7-11 117 6-9-13 4-7-11 450 10-15-22 8-11-20 113 5-7-13 169 7-10-15 5-7-13 250 0.004 0.043 141 6-8-14 4-6-11 35 4-6-8 53 5-7-11 4-6-8 250 11 7-11-17 5-8-15 63 5-7-10 94 6-9-13 5-7-10 391 15 11-14-20 6-10-15 98 5-8-12 146 8-11-15 6-8-12 563 17 13-17-24 9-14-22 141 6-9-14 211 8-12-17 6-9-14 350 0.008 0.084 197 19 8-12-17 6-9-13 49 5-7-10 74 7-9-13 6-7-10 350 22 10-14-20 8-11-18 88 7-8-12 131 9-11-15 7-8-12 547 26 13-16-23 9-13-18 137 8-10-14 205 10-13-18 8-10-14 788 28 17-20-29 13-18-26 197 9-12-17 295 12-14-20 9-12-17 400 0.010 0.110 225 23 9-13-18 7-10-14 56 6-8-11 84 8-10-13 6-7-11 400 27 11-15-21 9-13-19 100 7-9-13 150 9-11-16 7-9-12 625 30 14-18-25 10-13-19 156 9-11-15 234 11-13-19 9-11-15 900 33 18-22-31 15-20-28 225 10-13-18 338 13-15-22 10-13-18 500 0.016 0.171 281 31 11-14-20 9-11-15 70 7-8-12 105 9-11-15 7-8-12 500 35 14-17-24 11-15-21 125 8-10-14 188 10-13-18 8-10-14 781 38 16-20-28 12-15-21 195 10-12-17 293 12-15-21 10-12-17 1125 40 20-24-35 18-22-31 281 11-14-20 422 14-17-24 11-14-20 600 0.022 0.247 338 37 13-16-22 10-12-17 84 8-9-13 127 10-12-17 7-9-13 600 41 15-19-26 13-16-23 150 9-11-15 225 11-14-20 9-11-15 938 44 18-22-30 13-17-23 234 11-13-18 352 13-16-23 11-13-19 1350 47 22-27-38 20-24-34 338 13-15-22 506 15-19-27 13-15-22 • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for isothermal conditions F PERFORMANCE DATA • All pressures are in inches of water • Throw velocities given are for isothermal terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB 300 0.006 0.062 169 13 7-10-16 5-8-12 42 5-7-9 63 6-8-12 5-6-9 300 17 9-13-19 6-10-16 75 6-8-11 113 8-10-14 6-8-11 469 21 12-15-22 8-11-17 117 7-9-13 176 9-12-16 7-9-13 675 23 15-19-27 11-17-24 169 7-11-15 253 10-13-19 7-11-15 Redefine your comfort zone. ™ | www.titus-hvac.com ISOTHERMAL TDX / LOUVERED FACE, INDUCTION NOZZLES / SQUARE NECK F191 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA ISOTHERMAL TDX / LOUVERED FACE, INDUCTION NOZZLES / ROUND NECK Backpan Size Inlet Duct Size 6" Round 9" x 9" 8" Round F Backpan Size Inlet Duct Size 8" Round PERFORMANCE DATA 12" x 12" 10" Round F192 F192 12" Round Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. 200 0.003 0.015 39 1-2-4 1-2-4 10 0-1-2 15 1-2-3 0-1-2 70 3-5-9 3-4-8 17 2-3-5 26 3-4-6 2-3-5 250 0.004 0.024 49 1-2-5 2-2-5 12 1-1-3 18 1-2-4 1-1-3 87 4-6-10 3-5-9 22 2-3-6 33 3-5-7 2-3-7 300 0.006 0.034 59 2-3-6 2-3-6 15 1-2-3 22 2-2-5 1-2-3 105 13 5-7-11 4-6-11 26 3-4-7 39 4-5-8 3-4-7 350 0.008 0.046 69 2-3-7 2-3-7 17 1-2-4 26 2-3-5 1-2-4 122 18 5-8-12 4-7-12 31 3-4-8 46 5-6-8 3-5-8 400 0.010 0.061 79 3-4-8 3-4-8 20 1-2-4 29 2-3-6 1-2-4 140 23 6-9-13 5-8-12 35 3-5-8 52 5-6-9 3-5-9 450 0.013 0.077 88 12 3-4-9 3-4-8 22 2-2-5 33 2-4-6 2-3-5 157 27 7-10-14 6-8-13 39 4-6-9 59 5-7-9 4-6-9 500 0.016 0.095 98 16 3-5-10 3-5-9 25 2-3-5 37 3-4-6 2-3-6 175 30 8-10-14 6-9-14 44 4-6-9 65 6-7-10 4-7-10 Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. 200 0.003 0.021 70 2-3-7 1-3-6 17 1-2-4 26 2-3-6 1-2-4 109 2-4-9 2-4-8 27 1-3-5 41 2-4-7 1-3-5 157 2-5-10 2-4-9 39 2-3-6 59 3-4-9 2-3-7 250 0.004 0.033 87 3-4-8 2-4-7 22 2-2-5 33 2-4-7 1-2-5 136 3-5-11 3-5-11 34 2-3-7 51 3-4-9 2-3-7 196 4-7-13 3-6-12 49 3-4-8 74 4-6-11 3-4-8 300 0.006 0.047 105 13 3-5-10 3-4-8 26 2-3-5 39 3-4-7 2-3-6 164 15 4-6-13 4-6-13 41 3-4-8 61 4-5-11 3-4-8 236 16 5-8-16 4-7-14 59 3-5-10 88 4-7-12 3-5-10 350 0.008 0.065 122 18 4-6-12 3-5-10 31 2-3-6 46 3-5-8 2-3-7 191 20 5-8-15 5-7-14 48 3-5-9 72 4-6-12 3-5-9 275 21 6-9-18 5-8-16 69 4-6-11 103 5-8-13 4-6-11 400 0.010 0.084 140 23 4-7-13 4-6-11 35 2-4-7 52 4-6-9 3-4-8 218 25 6-9-17 6-8-15 55 4-5-9 82 5-7-12 4-5-9 314 26 7-10-21 6-9-18 79 4-6-12 118 6-9-14 4-7-11 450 0.013 0.107 157 27 5-8-13 4-6-13 39 3-4-8 59 4-6-9 3-4-9 245 29 6-10-19 6-10-16 61 4-6-10 92 5-8-13 4-6-10 353 30 8-12-24 7-10-21 88 5-7-13 133 7-10-15 5-7-12 500 0.016 0.132 175 30 6-8-14 5-7-14 44 3-5-9 65 5-7-10 3-5-9 273 32 7-11-21 7-11-17 68 4-7-10 102 6-9-14 5-7-10 393 34 9-13-26 8-12-23 98 5-8-14 147 7-11-16 6-8-13 • All pressures are in inches of water • Throw velocities given are for isothermal terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. • Throw values given are for isothermal conditions diffusers PERFORMANCE DATA Backpan Size Inlet Duct Size 10" Round 15" x 15" 12" Round 14" Round Backpan Size Inlet Duct Size 12" Round 16" Round 400 0.010 0.082 218 5-7-15 5-7-12 55 3-5-8 82 4-6-11 3-5-8 314 18 6-9-18 5-8-15 79 4-6-11 118 5-8-12 4-6-10 428 26 8-13-21 7-11-21 107 5-8-13 160 7-10-15 5-8-12 450 0.013 0.104 245 12 6-8-16 5-8-12 61 4-5-9 92 5-7-11 4-5-8 353 22 7-10-19 6-9-17 88 4-6-11 133 6-9-13 4-7-11 481 30 9-14-22 8-12-22 120 6-9-13 180 8-11-16 6-9-13 500 0.016 0.129 273 15 6-9-17 6-9-13 68 4-6-9 102 5-8-12 4-6-9 393 25 7-11-20 6-10-19 98 5-7-12 147 7-10-14 5-7-11 535 34 10-16-24 9-13-23 134 7-10-14 200 9-12-16 7-9-13 550 0.019 0.156 300 19 7-10-17 6-10-14 75 4-6-9 112 6-9-13 4-7-9 432 28 8-12-21 7-11-20 108 5-8-12 162 7-10-14 5-8-12 588 37 11-17-25 10-15-24 147 7-10-15 220 10-12-17 8-10-14 600 0.022 0.186 327 22 7-11-18 7-10-14 82 5-7-10 123 6-9-13 5-7-10 471 31 9-13-22 8-12-21 118 6-8-13 177 8-11-15 6-9-12 641 40 13-18-26 11-16-25 160 8-11-15 241 10-13-18 8-10-15 650 0.026 0.218 355 24 8-12-19 8-10-15 89 5-7-10 133 7-10-14 5-7-10 511 34 10-15-23 8-12-22 128 6-9-14 191 8-11-16 6-9-13 695 42 14-19-27 12-17-26 174 9-11-16 261 11-13-19 9-11-15 700 0.031 0.252 382 27 9-13-20 8-11-15 95 5-8-11 143 7-10-14 6-7-11 550 36 10-16-23 9-13-23 137 7-10-14 206 9-11-16 7-9-13 748 45 15-20-28 13-19-27 187 9-12-17 281 11-14-19 9-11-16 Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. 600 0.022 0.209 471 30 7-11-15 6-9-14 118 5-7-11 177 7-9-13 5-7-10 641 38 10-13-18 9-12-17 160 7-9-13 241 9-11-15 7-9-12 838 45 13-17-24 11-15-22 209 8-12-17 314 11-14-20 9-11-16 650 0.026 0.245 511 32 8-11-16 7-10-15 128 5-8-11 191 7-9-13 5-8-11 695 41 11-14-19 9-13-18 174 7-10-14 261 9-11-16 7-9-13 908 48 14-18-25 11-16-23 227 9-12-18 340 12-14-20 9-12-16 700 0.031 0.284 550 35 9-12-17 7-11-15 137 6-8-12 206 8-10-14 6-8-11 748 43 12-14-20 10-13-18 187 8-10-14 281 9-12-16 8-9-13 977 50 15-18-26 12-17-24 244 10-13-18 367 12-15-21 10-12-17 750 0.035 0.326 589 37 9-12-17 8-11-16 147 6-9-12 221 8-10-14 6-8-12 802 45 12-15-21 11-13-19 200 8-10-15 301 10-12-17 8-10-14 1047 52 15-19-27 13-17-24 262 10-13-19 393 13-15-22 10-13-18 800 0.040 0.371 628 39 10-13-18 8-12-16 157 6-9-13 236 8-10-15 7-8-12 855 48 12-15-21 11-14-20 214 9-11-15 321 10-12-18 8-10-14 1117 55 16-19-27 14-18-25 279 11-14-20 419 13-16-23 11-13-18 850 0.045 0.419 668 41 11-13-18 9-12-17 167 7-9-13 250 9-11-15 7-9-12 909 50 13-16-22 12-14-20 227 9-11-16 341 10-13-18 8-10-15 1187 57 16-20-28 15-18-26 297 12-14-20 445 13-16-23 11-13-19 900 0.051 0.470 707 43 11-13-18 9-12-17 177 7-10-13 265 9-11-15 7-9-13 962 52 13-16-23 12-15-21 241 9-11-16 361 11-13-19 9-11-15 1257 59 17-21-29 15-19-27 314 12-15-21 471 14-17-24 11-14-19 • All pressures are in inches of water • Throw velocities given are for isothermal terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for isothermal conditions F PERFORMANCE DATA 18" x 18" 14" Round Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Redefine your comfort zone. ™ | www.titus-hvac.com ISOTHERMAL TDX / LOUVERED FACE, INDUCTION NOZZLES / SQUARE NECK F193 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA 20DT COOLING TDX / LOUVERED FACE, INDUCTION NOZZLES / SQUARE NECK Inlet Duct Size 9" x 9" 12" x 12" F 15" x 15" PERFORMANCE DATA 18" x 18" F194 F194 Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. 200 0.003 0.027 113 4-6-10 3-4-7 28 3-4-6 42 3-5-7 3-4-6 200 5-7-12 4-6-10 50 3-5-7 75 5-7-9 3-5-7 313 7-9-13 4-7-10 78 4-6-8 117 5-7-10 4-6-9 450 9-12-16 6-10-14 113 4-6-9 169 6-8-12 4-6-9 250 0.004 0.043 141 5-7-11 4-5-8 35 3-4-6 53 4-6-8 3-4-6 250 11 6-9-13 5-7-11 63 4-6-8 94 6-7-11 4-6-8 391 15 9-10-15 5-8-11 98 5-6-9 146 7-8-11 5-7-10 563 17 11-13-18 8-11-16 141 5-7-10 211 7-9-13 5-7-10 • All pressures are in inches of water • Throw velocities given are for 20B cooling at terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB 300 0.006 0.062 169 13 6-8-12 4-6-9 42 4-5-7 63 5-6-9 4-5-7 300 17 7-10-14 6-8-12 75 5-6-9 113 7-8-12 5-6-9 469 21 9-11-16 7-9-12 117 6-7-10 176 7-9-12 6-8-11 675 23 12-14-20 10-12-17 169 6-8-11 253 8-10-14 6-8-11 350 0.008 0.084 197 19 7-9-13 5-7-10 49 4-5-7 74 5-7-9 4-5-7 350 22 8-11-16 6-9-13 88 5-7-10 131 7-9-12 6-7-10 547 26 10-12-17 8-9-13 137 6-7-11 205 8-9-13 7-9-12 788 28 13-15-22 11-13-18 197 7-9-12 295 9-11-16 7-9-12 400 0.010 0.110 225 23 8-10-14 6-7-10 56 5-6-8 84 6-7-10 5-6-8 400 27 10-12-17 7-10-14 100 6-7-10 150 8-9-13 6-7-11 625 30 11-13-19 8-10-14 156 7-8-11 234 8-10-14 7-9-13 900 33 13-16-23 11-14-20 225 8-9-13 338 10-12-17 8-9-13 500 0.016 0.171 281 31 9-11-15 7-8-11 70 5-6-9 105 7-8-11 5-6-9 500 35 11-13-19 9-11-16 125 7-8-12 188 9-11-15 7-8-12 781 34 12-15-21 9-11-16 195 7-9-13 293 9-11-16 8-10-15 1125 40 15-18-26 13-16-22 281 8-10-15 422 11-13-19 9-10-15 600 0.022 0.247 338 37 10-12-17 7-9-12 84 6-7-10 127 7-9-12 6-7-10 600 41 12-14-20 10-12-17 150 7-9-13 225 9-12-16 7-9-13 938 38 13-16-23 10-12-18 234 8-10-14 352 10-12-17 9-11-16 1350 47 16-20-28 14-17-24 338 9-11-16 506 12-14-20 9-11-16 • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for cooling conditions diffusers PERFORMANCE DATA Backpan Size Inlet Duct Size 6" Round 9" x 9" 8" Round Backpan Size Inlet Duct Size 8" Round 12" x 12" 10" Round 200 0.003 0.024 39 1-2-3 1-2-3 10 0-1-2 15 1-1-3 0-1-2 70 3-4-7 2-3-6 17 1-2-4 26 2-3-5 1-2-4 250 0.004 0.037 49 1-2-4 1-2-3 12 1-1-2 18 1-2-3 1-1-2 87 3-5-8 3-4-7 22 2-3-5 33 3-4-5 2-3-5 300 0.006 0.053 59 2-2-5 2-2-4 15 1-1-3 22 1-2-4 1-1-3 105 13 4-6-8 3-5-8 26 2-3-5 39 3-4-6 2-3-6 350 0.008 0.073 69 2-3-6 2-3-4 17 1-2-3 26 2-2-4 1-2-3 122 18 5-6-9 4-6-9 31 2-4-6 46 4-4-6 3-4-6 400 0.010 0.095 79 2-3-6 2-3-4 20 1-2-4 29 2-3-4 1-2-4 140 23 5-7-10 4-6-9 35 3-4-6 52 4-5-7 3-4-6 450 0.013 0.120 88 12 2-4-7 2-3-5 22 1-2-4 33 2-3-5 1-2-4 157 27 6-7-10 5-7-10 39 3-5-6 59 4-5-7 3-5-7 500 0.016 0.148 98 16 3-4-7 3-3-5 25 2-2-5 37 2-3-5 2-2-5 175 30 6-8-11 5-7-10 44 4-5-7 65 4-5-7 4-5-7 Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. 200 0.003 0.024 70 2-3-6 1-2-5 17 1-2-3 26 2-2-5 1-2-3 109 2-4-7 1-3-6 27 1-2-5 41 2-3-6 1-2-5 157 2-4-9 2-4-8 39 2-3-6 59 3-4-7 2-3-6 250 0.004 0.037 87 2-4-7 2-3-6 22 1-2-4 33 2-3-5 1-2-4 136 3-5-9 2-4-8 34 2-3-6 51 2-4-6 2-3-5 196 4-6-11 3-5-10 49 2-4-7 74 3-5-8 2-4-6 300 0.006 0.053 105 13 3-4-8 2-4-6 26 2-2-5 39 2-4-6 2-2-5 164 15 4-5-10 3-5-9 41 2-3-6 61 3-4-7 2-3-6 236 16 4-7-13 4-6-12 59 3-4-7 88 4-6-9 3-4-7 350 0.008 0.073 122 18 3-5-9 3-4-7 31 2-3-5 46 3-4-6 2-3-6 191 20 4-6-11 4-5-9 48 3-4-7 72 3-5-8 3-4-6 275 21 5-8-15 5-7-13 69 3-5-8 103 4-7-9 3-5-8 400 0.010 0.095 140 23 4-6-9 3-5-7 35 2-3-6 52 3-5-6 2-3-6 218 25 5-7-12 4-6-10 55 3-5-7 82 4-6-8 3-5-7 314 26 6-9-16 5-8-14 79 4-6-8 118 5-7-10 4-6-8 450 0.013 0.120 157 27 4-6-10 4-5-8 39 2-3-6 59 4-5-7 2-4-7 245 29 5-8-13 5-7-11 61 3-5-7 92 4-6-9 3-5-7 353 30 7-10-17 6-9-15 88 4-6-9 133 6-7-10 4-6-9 500 0.016 0.148 175 30 5-7-11 4-6-8 44 3-4-7 65 4-5-7 3-4-7 273 32 6-9-13 5-8-11 68 4-6-8 102 5-6-9 4-5-8 393 34 7-11-18 7-10-16 98 5-7-9 147 6-8-11 5-6-9 • All pressures are in inches of water • Throw velocities given are for 20B cooling at terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for cooling conditions F PERFORMANCE DATA 12" Round Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Redefine your comfort zone. ™ | www.titus-hvac.com 20DT COOLING TDX / LOUVERED FACE, INDUCTION NOZZLES / ROUND NECK F195 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA 20DT COOLING TDX / LOUVERED FACE, INDUCTION NOZZLES / ROUND NECK Backpan Size Inlet Duct Size 10" Round 15" x 15" 12" Round F 14" Round Backpan Size Inlet Duct Size 12" Round PERFORMANCE DATA 18" x 18" 14" Round F196 F196 16" Round Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. 400 0.010 0.095 218 4-6-11 4-6-9 55 3-4-6 82 4-5-8 3-4-6 314 18 5-8-13 4-7-13 79 3-5-8 118 4-7-9 3-5-7 428 26 7-11-16 6-9-15 107 4-7-9 160 6-8-11 5-6-9 450 0.013 0.120 245 12 5-7-12 5-7-9 61 3-5-6 92 4-6-9 3-4-6 353 22 6-9-14 5-7-14 88 4-5-8 133 5-7-10 4-6-8 481 30 8-12-17 7-10-16 120 5-7-10 180 7-8-12 5-7-9 500 0.016 0.148 273 15 5-8-12 5-7-10 68 3-5-7 102 4-6-9 3-5-7 393 25 6-9-15 5-8-14 98 4-6-9 147 6-7-10 4-6-8 535 34 9-13-18 8-11-17 134 6-8-11 200 7-9-12 6-7-10 550 0.019 0.179 300 19 6-9-13 6-7-10 75 4-5-7 112 5-7-10 4-5-7 432 28 7-10-16 6-9-15 108 4-7-9 162 6-8-11 5-6-9 588 37 10-13-19 8-13-18 147 6-8-11 220 7-9-13 6-7-10 600 0.022 0.213 327 22 6-9-14 6-8-11 82 4-5-7 123 5-7-10 4-5-7 471 31 8-11-16 7-10-16 118 5-7-10 177 7-8-11 5-6-9 641 40 11-14-19 9-13-19 160 7-8-12 241 8-10-13 6-8-11 650 0.026 0.250 355 24 7-10-14 6-8-11 89 4-5-8 133 6-7-10 4-5-8 511 34 8-12-17 7-11-16 128 5-7-10 191 7-8-12 5-7-9 695 42 12-14-20 10-14-20 174 7-9-12 261 8-10-14 7-8-11 700 0.031 0.290 382 27 7-10-15 7-8-12 95 5-6-8 143 6-8-11 5-6-8 550 36 9-12-18 8-11-17 137 6-7-11 206 7-9-12 6-7-10 748 45 12-15-21 11-14-20 187 7-9-13 281 8-10-15 7-8-12 Neck Velocity, fpm Velocity Pressure, in. wg. Total Pressure, in. wg. (max) Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. Total cfm NC S1-Pattern Throw, ft. S2 & G2-Pattern Throw, ft. cfm Side A A3- Pattern-Side A, Throw, ft. cfm Side B A3- Pattern-Side B, Throw, ft. A4-Pattern Throw, ft. 600 0.022 0.213 471 29 6-8-12 5-8-11 118 4-6-8 177 6-7-10 4-5-8 641 38 8-10-14 7-9-13 160 6-7-10 241 7-8-11 5-7-9 838 42 10-13-18 9-12-16 209 7-9-13 314 8-10-15 7-8-12 650 0.026 0.250 511 32 7-9-12 6-8-11 128 4-6-9 191 6-7-10 5-6-8 695 41 8-10-14 8-9-13 174 6-7-10 261 7-8-12 6-7-10 908 45 11-13-19 10-12-17 227 8-9-13 340 9-11-15 7-9-12 700 0.031 0.290 550 34 7-9-13 6-8-12 137 5-6-9 206 6-7-10 5-6-8 748 43 9-11-15 8-10-14 187 6-8-11 281 7-9-12 6-7-10 977 47 11-14-19 10-13-18 244 8-10-14 367 9-11-16 7-9-13 750 0.035 0.333 589 37 7-9-13 7-8-12 147 5-7-9 221 6-8-11 5-6-9 802 45 9-11-15 8-10-14 200 6-8-11 301 7-9-13 6-7-10 1047 50 12-14-20 11-13-18 262 8-10-14 393 9-12-16 8-9-13 800 0.040 0.379 628 39 8-9-13 7-9-12 157 5-7-10 236 6-8-11 5-6-9 855 48 9-11-16 8-10-15 214 7-8-11 321 8-9-13 6-8-11 1117 52 12-15-21 11-13-19 279 8-10-15 419 10-12-17 8-10-14 850 0.045 0.428 668 41 8-10-14 7-9-13 167 6-7-10 250 7-8-11 5-6-9 909 50 10-12-16 9-11-15 227 7-8-12 341 8-10-14 6-8-11 1187 54 12-15-21 11-14-20 297 9-11-15 445 10-12-17 8-10-14 900 0.051 0.480 707 43 8-10-14 8-9-13 177 6-7-10 265 7-8-12 5-7-9 962 52 10-12-17 9-11-16 241 7-9-12 361 8-10-14 7-8-11 1257 56 13-15-22 12-14-20 314 9-11-16 471 10-13-18 8-10-15 • All pressures are in inches of water • Throw velocities given are for 20B cooling at terminal velocities of 150, 100 and 50 fpm. See the section, Engineering Guidelines for additional information. • NC values based on Octave Band 2 to 7 sound power levels minus a room absorption of 10 dB • Dash (-) in space denotes an NC value less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006 • Throw values given are for cooling conditions Square and Rectangular Ceiling Diffusers (continued) diffusers Redefine your comfort zone. ™ | www.titus-hvac.com TDX-NT / TDX-AA-NT • The Titus TDX-NT and TDX-AA-NT have louvered faces with integrated induction nozzles for exceptional air mixing • Models TDX-NT and TDX-AA-NT are high capacity ceiling diffusers for use in narrow tee regressed ceilings. These diffusers maintain an unbroken horizontal airflow pattern from maximum cfm down to minimum, which makes them excellent choices for variable air volume application. • Model TDX-NT is extremely flexible, with cores available for 1-, 2-, 3- or 4-way horizontal flow • Core is easily removable from the face of the diffuser • Slot operator on the optional Model AG-95 damper allows easy volume adjustment (Square necks only) • Material is heavy gauge steel or aluminum with miscellaneous steel components TDX-NT / TDX-AA-NT • For a uniform face appearance on all round neck sizes, specify an 18 x 18" dimension ‘A’ size and the desired round neck size. This is available in 24" x 24" lay-in module size only. AVAILABLE MODELS: See website for Specifications F TDX-NT / Steel TDX-AA-NT / Aluminum FINISH Standard Finish - #26 White OVERVIEW Louvered Face / Induction Nozzles / Narrow Tee The Titus TDX-AA and TDX-AA-NT have louvered faces with integrated induction nozzles for exceptional air mixing. These models are high capacity ceiling diffusers that maintain a continuous horizontal flow from maximum cfm down to minimum cfm, making them an excellent choice for variable air volume applications. TDX-NT / TDX-AA-NT F197 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS TDX-NT / TDX-AA-NT UNIT DIMENSIONS Border Type NT Square Neck 2⅛" 23⅜" 24" DIMENSIONS F F198 F198 All dimensions are in inches Adjustable Ceiling Diffuser diffusers Redefine your comfort zone. ™ | www.titus-hvac.com 250 / 250-AA • Titus Models 250 and 250-AA present a clean, functional, strong appearance, along with high performance • Designed for ceiling, high side wall, and low side wall installations • Excellent for variable air volume applications • For Border Type 1, the one-way discharge pattern is available in duct sizes 6" x 4" through 36" x 36". The two-, three-, and four-way patterns are available in duct sizes 6" x 6" through 36" x 36". • Louvers are individually adjustable from the face of the diffuser. The louvers regulate the air volume as well as the angle of discharge. • Optional Model AG-15 opposed blade damper has a screwdriver adjustment accessible through the face of the diffuser. Mounts on the neck of the diffuser. • Optional Model AG-20 multi-louver damper has an adjusting lever at the face of the diffuser. Mounted on the diffuser at the factory. Steel, finished to match the diffuser. 250 / 250-AA • Diffuser material is steel in Model 250, aluminum with miscellaneous steel components in Model 250-AA. AVAILABLE MODELS: See website for Specifications F 250 / Steel 250-AA / Aluminum FINISHES Standard Finish - #26 White Optional Finish - #01 Aluminum OVERVIEW Adjustable 1-, 2-, 3-, or 4-way Discharge Pattern Titus Models 250 and 250-AA present a clean, functional, strong appearance, along with high performance. They are designed for ceiling, high side wall, and low side wall installations and are available in 1, 2, 3 or 4-way configurations. 250 / 250-AA F199 diffusers F 250 / 250-AA UNIT DIMENSIONS Border Type 3 (Lay-In) Panel Mounted (note) ⅜" 23¾" 13/16" 23¾" Note: Maxiumum duct size is 36 x 36 inches for Border Type 1. Border Type 3 - Standard Duct Sizes Border Type 1 (Surface Mount) (note) Duct Size plus 1¾" ¼" 1¼" DIMENSIONS All dimensions are in inches 1" Duct Size minus ¾" 9/16" Duct Size plus 1¾" 1¼" F200 F200 15/16" Duct Size minus ¾" Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS • • • • • • • • • • 6x6 8x8 9x9 10 x 10 12 x 12 14 x 14 15 x 15 16 x 16 18 x 18 21 x 21 diffusers Optional Discharge Patterns 2-Way 2-Way Corner L1 L1 L2 L1 L2 L2C L2 L2C L3 L2C L3 L4 S1 S1 S2 S1 S2 S2C S2 S2C S3 S2C S3 S4 Note: For square diffusers (height = width), specify L1, L2, L2C, L3, L4, S1, S2, S2C, S3 or S4 4-Way 3-Way Patterns are shown looking at the diffuser face L2 L2C L2C L3 L3 L4 L4 S2 S2C S2C S3 S3 S4 S4 L3 L4 S3 S4 F OPTIONAL DISCHARGE PATTERNS • Models 250 and 250-AA diffusers can be ordered in any of the discharge patterns shown in the diagrams at the right • Because the louvers are individually adjustable, each direction of discharge can have its own volume and angle of discharge, all from one diffuser • The preceeding performance tables show values for the various discharge patterns Redefine your comfort zone. ™ | www.titus-hvac.com 1-Way F201 diffusers F 250, 250-AA / ADJUSTABLE, 1-, 2-, 3- OR 4-WAY DISCHARGE PATTERN NC-20 Core Area Sq. Feet 0.12 0.16 0.20 0.26 0.30 0.35 PERFORMANCE DATA 0.40 F202 F202 0.45 Core Velocity 100 Velocity Pressure 0.001 Total Pressure 0.003 Nominal Duct Size Inches 6x4 8x4 10 x 4 6x6 12 x 4 8x6 14 x 4 16 x 4 10 x 6 8x8 18 x 4 12 x 6 20 x 4 14 x 6 10 x 8 Throw, Feet Throw, Feet Throw, Feet Throw, Feet Throw, Feet Throw, Feet Throw, Feet Throw, Feet 0.55 24 x 4 16 x 6 12 x 8 Throw, Feet 0.62 18 x 6 10 x 10 Throw, Feet cfm NC 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way NC-30 200 300 400 500 600 700 800 900 1000 10 0.002 0.014 25 0.006 0.031 35 15 30 50 40 7-6-9 4-6-10 5-7-11 5-8-13 60 0.010 0.056 50 14 5-8-13 7-10-16 65 15 5-7-12 5-8-13 6-9-14 7-11-17 80 16 5-8-13 6-9-14 6-9-15 8-11-18 105 17 6-9-14 6-9-15 7-9-12 8-11-15 120 18 6-8-10 6-9-15 7-10-13 8-11-16 140 18 6-9-15 6-9-15 7-10-13 9-12-17 160 19 6-8-11 7-9-12 8-10-14 9-13-18 180 19 6-9-15 7-11-17 8-12-19 9-14-22 220 20 7-10-16 8-11-18 8-12-20 10-13-19 250 21 7-11-17 8-11-18 8-12-20 10-14-20 0.016 0.090 60 20 7-9-12 8-11-15 80 21 6-9-14 6-9-15 7-11-17 9-13-21 100 22 6-9-15 7-10-16 8-11-18 9-14-22 130 23 7-10-16 8-11-18 8-12-20 10-14-20 150 23 7-10-13 8-11-15 9-12-17 10-15-21 175 24 8-11-18 8-12-19 9-13-21 10-15-21 200 25 8-11-15 8-11-16 9-13-18 11-15-22 225 26 8-12-19 9-13-21 10-13-19 11-16-23 275 26 8-12-20 9-14-22 10-14-20 12-17-25 310 27 9-13-21 9-14-22 10-16-25 12-19-30 0.022 0.131 70 24 8-12-19 10-13-19 95 26 7-11-17 8-12-19 9-13-21 10-15-21 120 27 8-11-18 8-12-20 9-14-22 11-15-22 155 28 8-12-20 9-13-21 10-14-20 12-17-24 180 28 9-12-17 9-13-18 10-14-20 12-17-25 210 29 9-13-21 10-13-19 10-15-21 12-18-26 240 30 9-13-18 10-14-20 11-15-22 13-19-31 270 30 10-13-19 10-14-20 11-16-23 13-20-32 330 31 10-14-20 11-15-22 12-17-25 14-21-34 370 32 10-15-21 11-16-23 12-17-25 15-22-35 0.031 0.175 85 28 9-13-18 11-16-23 110 30 8-12-20 9-14-22 10-14-20 12-17-25 140 31 9-13-21 10-13-19 10-15-21 12-18-26 180 32 10-13-19 10-14-20 11-16-23 13-20-32 210 32 10-14-20 10-15-21 12-17-24 14-21-34 245 33 10-15-21 11-15-22 12-17-25 15-22-35 280 34 11-15-22 11-16-20 12-18-26 15-22-36 315 34 11-15-22 12-17-24 13-19-31 15-23-37 385 35 12-17-24 12-18-26 14-21-33 16-24-39 435 36 12-17-24 13-19-31 14-21-34 17-26-41 0.040 0.225 95 32 10-15-21 12-18-26 130 33 9-14-22 10-14-20 11-16-23 13-20-32 160 34 10-14-20 11-15-22 12-17-25 14-21-34 210 35 11-15-22 11-16-23 13-19-31 15-23-37 240 36 11-16-23 12-17-25 13-20-32 16-24-38 280 37 12-17-24 14-19-30 14-21-33 17-25-40 320 37 12-17-25 13-19-31 14-21-34 17-26-41 360 38 12-18-26 13-20-32 15-22-35 18-26-42 440 39 13-19-31 14-21-33 15-23-37 18-27-44 495 39 13-20-32 14-21-34 16-24-38 19-29-46 0.051 0.290 110 35 12-17-24 14-21-34 145 36 10-15-21 11-16-23 12-18-26 15-22-36 180 37 11-16-23 12-17-25 13-20-32 16-24-38 235 38 12-17-25 13-19-31 14-21-34 17-26-41 270 39 12-18-26 13-20-32 16-24-38 18-27-43 315 39 13-19-31 14-21-33 15-23-37 18-27-44 360 40 13-20-32 15-22-35 16-24-38 19-29-46 405 41 14-21-33 15-22-36 16-24-39 20-29-47 495 41 15-22-35 16-24-38 17-26-41 21-31-50 560 42 15-22-36 16-24-39 18-27-43 21-32-51 0.062 0.355 120 38 13-19-31 15-23-37 160 39 12-17-24 12-18-26 14-21-33 17-25-40 200 40 12-17-25 13-20-32 15-22-35 18-26-42 260 41 13-20-32 14-21-34 16-24-38 19-28-45 300 42 14-21-33 15-22-35 16-24-39 20-29-47 350 42 14-21-34 15-23-37 17-26-41 20-31-49 400 43 15-22-35 16-24-38 18-26-42 21-32-51 450 44 15-23-37 16-24-39 18-27-44 22-33-53 550 44 16-24-39 17-26-41 19-29-46 23-35-56 620 45 17-25-40 18-27-43 20-29-47 24-36-57 20 25 50 30 3-4-7 3-4-7 3-5-8 4-5-6 60 35 3-4-7 3-5-8 3-5-8 4-5-6 70 40 3-4-7 3-5-8 4-6-9 4-5-6 80 45 3-5-8 3-5-8 4-6-9 5-6-7 90 55 3-5-8 3-5-8 4-6-9 5-7-11 110 2-3-4 2-3-5 2-3-5 2-4-6 60 3-5-8 4-6-9 4-6-10 5-7-12 125 2-3-4 2-3-5 2-3-5 2-3-6 4-6-9 4-6-9 4-6-10 5-7-12 4-6-9 4-6-10 5-7-11 6-9-14 80 10 4-5-6 5-6-7 5-6-8 6-8-11 90 10 4-5-6 5-6-7 5-7-9 6-8-11 105 11 5-7-11 5-7-12 5-8-13 7-9-12 120 12 5-6-7 5-6-8 6-8-10 7-9-12 135 12 5-6-8 5-7-9 6-8-10 7-11-17 165 13 5-7-12 5-8-13 6-9-15 8-11-18 185 13 5-8-13 6-9-14 6-9-15 8-11-18 Performance notes appear at end of performance data NC-40 Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA diffusers PERFORMANCE DATA NC-20 Core Area Sq. Feet 0.70 0.81 0.87 1.02 Core Velocity 100 Velocity Pressure 0.001 Total Pressure 0.003 Nominal Duct Size Inches 30 x 4 20 x 6 14 x 8 12 x 10 Throw, Feet 36 x 4 24 x 6 16 x 8 14 x 10 Throw, Feet 18 x 8 12 x 12 Throw, Feet 30 x 6 20 x 8 16 x 10 14 x 12 Throw, Feet 1.15 24 x 8 18 x 10 16 x 12 Throw, Feet 1.25 36 x 6 20 x 10 14 x 14 Throw, Feet 1.35 16 x 14 18 x 12 Throw, Feet 1.82 36 x 8 30 x 10 24 x 12 20 x 14 18 x 16 2.10 24 x 14 20 x 16 18 x 18 Throw, Feet Throw, Feet Throw, Feet NC-40 200 300 400 500 600 700 800 900 1000 70 0.002 0.014 140 2-3-5 2-3-5 2-4-6 3-4-7 80 4-6-9 4-6-9 5-7-11 5-8-13 160 2-3-5 2-3-5 2-4-6 3-4-7 85 4-6-9 4-6-10 5-7-11 5-8-13 175 2-3-5 2-3-5 2-4-6 3-4-7 100 4-6-9 4-6-10 5-7-11 6-9-14 205 2-3-5 2-4-6 2-4-6 3-4-7 115 4-6-10 4-6-10 5-7-12 6-9-14 230 2-3-5 2-4-6 2-4-6 3-5-8 125 4-6-10 5-7-11 5-7-12 6-9-15 250 2-3-5 2-4-6 2-4-6 3-5-8 135 4-5-6 5-6-7 5-6-8 6-8-11 270 2-4-6 2-4-6 3-4-7 3-5-8 155 4-5-6 5-6-7 5-7-9 6-8-11 305 2-4-6 2-4-6 3-4-7 3-5-8 182 5-6-7 5-6-8 5-7-9 7-9-12 365 2-4-6 2-4-6 3-4-7 3-5-8 210 5-6-7 5-6-8 6-8-10 7-9-12 420 2-4-6 3-4-7 3-4-7 4-6-9 5-6-8 5-7-9 6-8-10 7-10-13 0.006 0.031 210 14 5-8-13 6-9-14 7-10-16 8-12-19 245 15 6-9-14 6-9-15 7-10-16 8-12-20 260 15 6-9-14 6-9-15 7-11-17 8-12-20 305 16 6-9-15 7-10-16 7-11-17 9-13-21 345 16 6-9-15 7-10-16 8-11-18 9-14-22 375 16 6-8-11 7-9-12 8-10-14 9-13-18 405 17 7-10-16 7-11-17 8-12-19 10-13-19 460 17 7-10-16 7-11-17 8-12-19 10-13-19 545 18 7-11-17 8-11-18 8-12-20 10-14-20 630 19 8-11-18 8-12-19 9-13-21 10-15-21 0.010 0.056 280 21 7-11-17 8-12-19 9-13-21 10-15-21 325 22 8-11-18 8-12-20 9-14-22 11-15-22 350 22 8-12-19 8-12-20 9-14-22 11-15-22 410 23 8-12-19 9-13-21 10-13-19 11-17-27 460 24 8 -12-20 9 -13-21 10-13-19 12-17-24 500 24 8-12-20 9-14-22 10-14-20 12-17-25 540 24 9-13-21 9-14-22 10-15-21 12-17-25 610 25 9-13-21 10-13-19 10-15-21 12-18-26 730 26 9-14-22 10-14-20 11-16-23 13-20-32 840 26 10-13-19 10-15-21 12-17-24 14-21-33 0.016 0.090 350 27 9-13-21 10-13-19 10-15-21 12-19-30 405 28 9-14-22 11-15-22 11-15-22 13-20-32 435 28 10-13-19 10-15-21 11-16-23 13-20-32 510 29 10-14-20 10 -16-25 12-17-24 14-21-34 575 30 10-15-21 11-15-22 12-17-25 15-22-35 625 30 10-15-21 11-16-23 12-18-26 15-22-35 675 30 10-15-21 11-16-23 12-18-26 15-22-36 765 31 11-15-22 12-17-24 13-20-32 15-23-37 910 32 11-16-23 12-17-25 14-21-33 16-24-39 1050 32 12-17-24 12-18-26 14-21-34 17-25-40 0.022 0.131 420 32 10-15-21 11-16-23 12-18-26 15-22-36 485 33 11-15-22 12-17-24 13-19-31 16-24-38 520 33 11-16-23 12-17-25 13-20-32 16-24-39 610 34 12-17-24 12-18-26 14-21-33 17-25-40 690 34 12-17-25 13-19-31 14-21-34 17-26-41 750 35 12-17-25 13-20-32 15-22-35 18-26-42 810 35 12-18-26 13-20-32 15-22-36 18-27-43 920 36 13-19-31 14-21-33 15-23-37 18-27-44 1090 36 13-20-32 15-22-35 16-24-39 19-29-46 1260 37 14-21-34 15-22-36 17-25-40 20-30-48 0.031 0.175 490 36 12-17-25 13-20-32 15-22-35 18-26-42 565 37 12-18-26 14-21-33 15-22-36 18-27-44 610 37 13-19-31 14-21-33 15-23-37 19-28-45 715 38 13- 20-32 15-22-35 16-24-39 19-29-46 805 38 14-21-33 15-22-36 17-25-40 20-29-47 875 39 14-21-34 15-23-37 17-26-41 20-30-48 945 39 15-22-35 15-23-37 18-26-42 21-31-50 1070 40 15-22-36 16-24-39 18-27-43 21-32-51 1270 40 15-23-37 17-25-40 19-28-45 22-34-54 1470 41 16-24-39 18-26-42 19-29-46 23-34-55 0.040 0.225 560 40 14-21-33 15-22-36 17-25-40 20-29-47 650 40 14-21-34 15-23-37 17-26-41 20-31-49 695 40 15-22-35 16-24-38 18-26-42 21-31-50 815 41 15- 22-36 16-24-39 18-27-43 22-32-52 920 42 16-24-38 17-26-41 19-28-45 22-34-54 1000 42 16 -24-38 17-26-41 19-29-46 23-34-55 1080 42 16-24-39 18-26-42 20-29-47 23-35-56 1220 43 17-25-40 18-27-44 20-30-48 24-36-58 1460 44 18-26-42 19-28-45 21-31-50 25-37-60 1680 44 18-27-44 20-29-47 22-32-52 26-39-62 0.051 0.290 630 42 15-23-37 17-25-40 18-27-44 22- 33-53 730 43 16-24-38 17-26-41 19-29-46 23-34-55 785 43 16-24-39 18-26-42 20-29-47 23-35-56 920 44 17-26-41 18-27-44 20-31-49 25-37-59 1040 45 18-26-42 19-28-45 21-31-50 25-37-60 1120 45 18-27-43 19-29-46 21-32-51 26-39-62 1220 45 18-27-434 20-29-47 22-33-53 26-39-63 1380 46 19-28-45 20-31-49 23-34-55 27-41-65 1640 47 20-29-47 21-32-51 24-36-57 29-42-68 1890 47 20-31-49 22-33-53 25-37-59 29-44-70 0.062 0.355 700 45 17-26-41 18-27-44 20-31-49 25-37-59 810 46 18-27-43 19-29-46 21-32-51 26-39-62 870 46 18-27-43 20-29-47 22-32-52 26-39-63 1020 47 19-28-45 20-30-48 23-34-55 27-41-65 1150 48 19-29-46 21-31-50 23-35-56 28-42-68 1250 48 20-29-47 21-32-51 24-36-57 29-43-69 1350 48 20-30-48 22-32-52 25-37-59 29-44-70 1530 49 21-31-50 22-34-54 25-37-60 30-46-73 1820 50 22-33-53 24-36-57 26-39-63 32-48-76 2100 50 23-34-55 25-37-59 28-41-66 33-50-80 Performance notes appear at end of performance data F PERFORMANCE DATA 1.53 30 x 8 24 x 10 20 x 12 18 x 14 16 x 16 cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way NC-30 Redefine your comfort zone. ™ | www.titus-hvac.com 250, 250-AA / ADJUSTABLE, 1-, 2-, 3- OR 4-WAY DISCHARGE PATTERN F203 diffusers PERFORMANCE DATA F F204 F204 250, 250-AA / ADJUSTABLE, 1-, 2-, 3- OR 4-WAY DISCHARGE PATTERN NC-20 Core Area Sq. Feet 2.35 2.68 Core Velocity 100 Velocity Pressure 0.001 Total Pressure 0.003 Nominal Duct Size Inches 36 x 10 30 x 12 24 x 16 20 x 18 Throw, Feet 36 x 12 30 x 14 24 x 18 20 x 20 Throw, Feet 3.15 36 x 14 30 x 16 24 x 20 Throw, Feet 3.65 36 x 16 30 x 18 24 x 24 Throw, Feet 4.05 36 x 18 30 x 20 Throw, Feet 4.72 36 x 20 30 x 24 Throw, Feet 5.82 36 x 24 30 x 30 Throw, Feet 7.17 36 x 30 Throw, Feet 8.63 36 x 36 Throw, Feet cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way cfm NC 4-Way 3-Way 2-Way 1-Way 200 235 0.002 0.014 470 2-4-6 3-4-7 3-5-8 4-6-9 270 5-6-8 5-7-9 6-8-11 7-10-13 535 3-4-7 3-4-7 3-5-8 4-6-9 315 5-7-9 6-8-10 6-8-11 8-10-14 630 10 5-7-9 6-8-10 7-9-12 8-11-15 730 11 6-9-14 6-9-15 7-9-12 8-11-16 810 11 6-9-14 6-9-15 7-10-13 8-11-16 945 12 6-9-15 7-9-12 7-10-13 9-12-17 1160 13 6-9-15 7-9-12 8-10-14 9-13-18 1430 14 7-9-12 7-10-13 8-11-16 10-13-19 1730 14 7-10-13 8-10-14 8-11-16 10-14-20 3-4-7 3-4-7 3-5-8 4-5-6 365 3-4-7 3-5-8 3-5-8 4-5-6 405 3-4-7 3-5-8 4-6-9 4-5-6 470 3-5-8 3-5-8 4-6-9 5-6-7 580 3-5-8 4-6-9 4-6-9 5-6-7 715 3-5-8 4-6-9 4-5-6 5-6-8 865 4-6-9 4-5-6 4-5-6 5-7-9 300 0.006 0.031 705 19 8-11-18 8-12-20 9-14 -22 11-15-22 805 20 8-12-19 8-12-20 9-14-22 11-16-23 945 20 8-12-19 9-13-21 10-14-20 12-17-24 1100 21 8-12-20 9-14-22 10-14-20 12-17-25 1220 22 9-13-21 9-14-22 10-15-21 12-18-26 1420 22 9-14-22 10-13-19 11-15-22 13-19-31 1750 23 10-13-19 10-15-21 11-16-23 13-20-32 2150 24 10-14-20 11-15-22 12-17-25 14-21-34 2590 25 10-15-21 11-16-23 12-18-26 15-22-36 • All pressures are in inches of water • Throw values given are for terminal velocities of 150, 100 and 50 fpm along a surface. The throw may be increased or decreased as much as 20% by changing the louver setting. • NC values based on a room absorption of 10 dB, re 10-12 watts • Blank areas denote NC values less than 10 and cfm values less than 50 • Black dividing lines denote ranges of NC values • Performance data is based on an approximate 1/8" opening between the border and the adjacent louver, with progressively wider spacings between louvers further away from the border. This setting discharges air parallel to the diffusers face (horizontal discharge, if installed in a ceiling). NC-30 400 0.010 0.056 940 27 10-14-20 10-15-21 12-17-24 14-21-33 1070 27 10-15-21 11-15-22 12-17-25 15-22-35 1260 28 11-15-22 11-16-23 12-18-26 15-22-36 1460 29 11-16-23 12-17-24 13-20-32 15-23-37 1620 29 11-16-23 12-17-25 13-20-32 16-24-39 1890 30 12-17-24 12-18-26 14-21-34 17-25-40 2330 31 12-18-26 13-20-32 15-22-35 18-26-42 2870 31 13-20-32 14-21-34 15-23-37 18-27-44 3450 32 14-21-33 15-22-35 16-24-39 19-29-46 500 0.016 0.090 1180 33 12-17-25 13-19-31 15-22-35 18-26-42 1340 33 12-18-26 14-21-33 15-22-36 18-27-43 1580 34 13-19-31 14-21-34 16-24-38 19-28-45 1820 35 14-21-33 15-22-35 16 -24-39 19-29-46 2020 35 14-21-34 15-22-36 17-25-40 20-29-47 2360 36 15-22-35 16-24-38 18-26-42 20-31-49 2910 37 15-23-37 17-25-40 18-27-44 22-32-52 3580 37 16-24-39 18-26-42 19-29-46 23-34-55 4320 38 17-26-41 18-27-44 20-30-48 24-36-58 NC-40 600 0.022 0.131 1410 37 15-22-35 15-23-37 18-26-42 20-31-49 1610 38 15-22-36 16-24-39 20-30-48 21-32-51 1890 39 15-23-37 17-25-40 19-28-45 22-33-53 2190 39 16 -24-39 18-26-42 19-29-46 23-34-55 2430 40 17-25-40 18-27-43 20-29-47 24-36-57 2830 40 18-26-42 19-28-45 20-31-49 25-37-59 3490 41 18-27-44 20-29-47 22-32-52 26-39-62 4300 42 19-29-46 21-31-50 23-34-55 28-41-66 5180 43 20-31-49 22-35-52 24-36-58 29-44-70 700 0.031 0.175 1640 41 17-25-40 18-27-43 20-30-48 24-36-57 1880 42 18-26-42 19-28-45 20-31-49 25-37-59 2200 43 18-27-43 19-29-46 21-32-51 26-39-62 2560 43 19-28-45 20-30-48 22-34-54 27-40-64 2830 44 19-29-46 20-31-49 23-34-55 28-41-66 3300 44 20-30-48 22-32-52 24-36-57 28-42-68 4070 45 21-32-51 23-34-55 25-37-60 30-45-72 5020 46 22-34-54 24-36-57 27-40-64 32-48-77 6040 47 23-35-56 25-37-60 28-42-67 33-50-80 800 0.040 0.225 1880 45 19-28 -45 20-31-49 22-34-54 27-40-64 2140 45 20-29-47 21-31-50 23-35-56 28-41-66 2520 46 20-31-49 22-32-52 24-36-58 29-43-69 2920 47 21-31-50 23-34-55 25-37-60 30-45-72 3240 47 22-32-52 23-35-56 26-39-62 31-46-74 3780 48 22-34-54 24-36-58 27-40-64 32-49-78 4660 49 24-36-57 25-38-61 28-42-68 34-51-82 5740 50 25-37-60 27-41-65 30-45-72 36-54-87 6900 51 27-40-64 27-42-68 32-48-76 38-57-91 900 0.051 0.290 2120 48 21-31-50 23-34-55 25-38-61 30-45-72 2410 48 22-32 -52 24-36-57 26-39-62 31-47-75 2840 49 23-34-55 25-37-59 27-41-65 33-49-79 3280 50 24-36-57 25-38-61 28-42-68 34-51-82 3640 50 25-37-59 26-39-63 29-44-70 35-52-84 4250 51 25-38-61 28-41-66 30-46-73 37-55-88 5240 52 27-40-64 29-44-70 32-48-77 39-58-93 6450 53 28-42-68 30-46-73 34-51-82 41-61-98 7700 53 30-44-71 32-48-77 36-54-86 43-64-103 1000 0.062 0.355 2350 51 24-36-57 25-37-60 28-42-68 34-51-82 2680 51 25-37-59 26-39-63 29-44-70 35-53-85 3150 52 26-39-62 28-41-66 30-46-73 37-56-89 3650 53 27-40-64 28-42-68 32-48-76 38-57-92 4050 53 28-41-66 29-44-70 33-49-79 39-59-94 4720 54 28-42-68 31-46-74 34-51-82 41-61-98 5820 55 30-45-72 32-49-78 36-54-87 44-66-105 7170 56 32-48-76 34-51-82 38-57-92 46-69-110 8630 56 33-50-80 36-54-87 40-60-96 48-72-116 NC-50 Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA • See the section, Engineering Guidelines for additional throw information • If all the louvers are adjusted to the full open position, the listed NC values will be reduced by 7, the total pressure will be 0.30 times those shown in the tables and the throw will be a vertical free jet • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines additional information. diffusers Nozzle Diffusers Redefine your comfort zone. ™ | www.titus-hvac.com TBF-AA (TURBOFUSER) • Titus TurboFuser series TBF-AA diffuser provides precise control of high capacity jets • The TurboFuser is a versatile diffuser for demanding spot cooling and heating HVAC applications, such as industrial or large open areas • An aesthetic alternative to conventional air distribution providing a contemporary look for sports complexes, atriums and lobbies • Material is heavy-duty aluminum • Deep deflection rings in each nozzle for maintaining directional control at high velocities up to 30 degrees in any direction • Nozzle sizes are 6", 8", 10", 12" and 14", with up to four nozzles per panel • Each ring of the nozzle assembly is 1-piece spun construction TBF-AA duct mounted AVAILABLE MODEL: open ceiling open areas See website for Specifications F TBF-AA / Aluminum FINISH Standard Finish - #26 White OVERVIEW Panel-Mounted Nozzles TurboFuser series TBF and TBF-AA diffusers provide precise control of high capacity jets. This is a versatile diffuser for demanding spot cooling and heating applications, such as industrial or large open areas. It also offers an aesthetic alternative to conventional air distributing providing a contemporary look for sports complexes, atriums and lobbies. TBF-AA F205 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS TBF-AA UNIT DIMENSIONS F Nozzle Size (inches) 6 8 10 12 14 NOM Duct Height 10 12 14 16 18 1 10 12 14 16 18 Width by Number of Nozzles 2 3 4 19 28 37 23 34 45 27 40 53 31 46 61 35 52 69 Typical Installation DIMENSIONS STRAIGHT DUCT F206 F206 All dimensions are in inches diffusers PERFORMANCE DATA Size 6 1 Nozzle Size 6 2 Nozzle Size 6 3 Nozzle Size 6 4 Nozzle Size 8 1 Nozzle Size 8 2 Nozzle Size 8 3 Nozzle Size 8 4 Nozzle Size 10 1 Nozzle Size 10 2 Nozzle Size 10 4 Nozzle 200 0.002 135 0.076 12-15-20 259 0.070 17-20-29 382 0.070 21-25-35 506 0.070 23-29-40 196 0.056 15-17-25 377 0.053 21-24-34 559 0.052 26-30-42 740 0.052 29-34-48 267 0.037 16-20-29 518 0.035 23-28-40 768 0.032 28-34-50 1019 0.031 32-39-56 300 0.006 203 0.171 13 14-17-25 388 0.158 18 20-24-35 573 0.157 20 25-30-44 759 0.157 23 28-34-49 294 0.127 15 17-21-30 566 0.118 16 24-30-42 838 0.116 18 30-37-52 1110 0.116 18 34-42-59 401 0.084 20-25-35 777 0.079 14 28-35-50 1153 0.071 16 34-43-61 1528 0.071 18 39-49-69 400 0.010 271 0.303 24 17-20-29 518 0.281 29 23-29-41 765 0.278 30 29-35-51 1012 0.278 33 33-40-57 392 0.226 19 20-25-34 755 0.210 25 28-34-48 1117 0.206 29 35-42-59 1480 0.207 29 39-48-67 535 0.149 20 24-29-41 1036 0.140 25 33-40-57 1537 0.127 27 41-50-70 2038 0.125 29 46-56-80 500 0.016 339 0.474 32 19-23-33 647 0.440 36 26-32-46 956 0.435 39 33-40-57 1264 0.435 41 37-45-64 490 0.353 27 22-27-40 943 0.328 34 31-38-55 1397 0.322 36 38-48-68 1850 0.323 37 43-54-78 668 0.232 28 26-32-46 1295 0.219 33 37-44-64 1921 0.198 34 45-55-79 2547 0.196 37 51-62-90 Performance notes appear at end of performance data 600 0.022 406 0.683 38 21-25-36 777 0.633 43 29-35-51 1147 0.626 43 36-44-63 1517 0.626 48 41-49-71 588 0.508 34 25-30-43 1132 0.473 40 34-42-60 1676 0.464 42 42-52-75 2220 0.465 43 48-59-85 802 0.334 34 29-35-50 1554 0.315 35 40-50-70 2305 0.285 42 50-61-87 3057 0.282 43 56-69-98 700 0.031 474 0.929 44 22-27-39 906 0.862 49 31-28-55 1338 0.853 51 38-47-67 1770 0.853 53 43-54-76 685 0.691 39 27-32-47 1320 0.644 46 37-45-66 1955 0.631 49 46-56-82 2590 0.633 50 52-64-93 936 0.455 41 31-38-55 1813 0.429 45 43-54-76 2689 0.388 47 54-66-95 3566 0.384 48 61-75-107 800 0.040 542 1.214 50 24-29-43 1036 1.125 54 34-41-60 1529 1.114 56 42-51-74 2023 1.114 58 48-57-83 783 0.903 45 29-34-51 1509 0.841 50 40-48-71 2235 0.824 53 50-59-88 2961 0.827 54 56-67-100 1070 0.594 45 33-41-59 2072 0.560 52 47-57-83 3074 0.506 53 57-70-102 4076 0.501 54 65-80-116 F PERFORMANCE DATA Size 10 3 Nozzle Duct Velocity, fpm Velocity Pressure, IN WG Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Redefine your comfort zone. ™ | www.titus-hvac.com TBF-AA / PANEL-MOUNTED NOZZLES F207 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA F TBF-AA - PANEL-MOUNTED NOZZLES Size 12 1 Nozzle Size 12 2 Nozzle Size 12 3 Nozzle Size 12 4 Nozzle Size 14 1 Nozzle Size 14 2 Nozzle Size 14 3 Nozzle PERFORMANCE DATA Size 14 4 Nozzle F208 F208 Duct Velocity, fpm Velocity Pressure, IN WG Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT 200 0.002 350 0.033 19-23-33 681 0.031 26-32-46 1011 0.031 32-40-57 1324 0.031 36-45-64 444 0.024 21-26-37 866 0.023 30-36-51 1288 0.023 37-35-63 1710 0.023 42-51-72 300 0.006 525 0.075 23-28-40 1021 0.071 16 32-40-56 1517 0.070 16 40-49-69 2013 0.069 16 45-56-78 666 0.055 26-32-45 1299 0.052 12 36-45-64 1932 0.052 15 45-55-79 2565 0.051 16 51-63-89 • All pressures given are in inches of water • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for additional throw information. • The throw values listed are with ceiling effect • To obtain static pressure, subtract the velocity pressure from the total pressure • If the diffuser is mounted on an exposed duct, the throw values are 70% of those listed in the table and will project downward 400 0.010 700 0.132 18 27-33-47 1362 0.126 27 37-46-66 2023 0.124 27 46-57-81 2684 0.123 27 52-64-92 888 0.097 18 29-37-53 1732 0.093 23 41-51-74 2576 0.092 25 50-63-91 3420 0.091 26 57-72-103 500 0.016 875 0.207 27 30-36-52 1702 0.197 35 42-51-73 2529 0.193 34 52-63-90 3356 0.192 35 59-71-102 1109 0.125 27 34-41-59 2165 0.146 30 47-58-83 3220 0.144 34 58-72-102 4275 0.142 36 66-81-116 600 0.022 1050 0.298 33 33-40-58 2042 0.283 42 46-56-81 3034 0.278 41 57-69-100 4027 0.276 43 64-78-113 1331 0.219 33 37-45-65 2597 0.210 37 51-64-91 3864 0.207 40 63-79-113 5130 0.205 41 72-89-128 700 0.031 1225 0.406 39 35-43-62 2383 0.385 47 50-61-87 3540 0.379 46 61-75-107 4698 0.375 49 69-85-122 1553 0.299 39 40-49-70 3030 0.286 43 56-69-98 4508 0.281 46 70-85-122 5985 0.279 47 79-96-138 800 0.040 1400 0.530 47 38-47-67 2723 0.503 53 53-66-94 4046 0.495 52 66-81-116 5369 0.490 53 75-92-132 1775 0.390 44 43-53-75 3463 0.373 47 60-74-106 5151 0.368 52 74-91-131 6840 0.365 53 84-103-148 • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 10 • Data obtained from tests conducted in accordance with ANSI/ ASHRAE Standard 70-2006. Actual performance, with flexible duct inlet, may vary in the field. See the section, Engineering Guidelines for additional information. diffusers Nozzle Diffusers (continued) Redefine your comfort zone. ™ | www.titus-hvac.com TND-AA • Designed to handle large air capacity requirements and provide concentrated long throws • Round nozzles are adjustable within mounting ring to 38B • Duct or hard surface mountable • Well suited for installations where the conditioned space is large, and where it is impractical to bring the duct work close to the occupants • Optional aperture volume damper accessible on face of nozzle • Extruded aluminum / aluminum construction TND-AA duct mounted AVAILABLE MODEL: open ceiling open areas See website for Specifications F TND-AA / Aluminum FINISHES Standard Finish - #26 White Optional Finishes - #01 Aluminum / #84Black OVERVIEW Nozzle Diffuser The Titus TND-AA diffusers are an excellent choice for applications that require large volumes of air with either directed and/or concentrated shots. Ideally suited for theaters, shopping malls, auditoriums, gyms and industrial applications. The TND-AA provides a 0 to 38 ° adjustable discharge with optional aperture damper for volume control. TND-AA F209 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS TND-AA UNIT DIMENSIONS SECTION A -A Ø B Ø A Ø G DAMPER (optional) SCREW HOLE Ø 7/32" Ø A E D F F SECTION X-X B G Ø H (interior) C DAMPER (optional) A E D DIMENSIONS F F210 F210 DUCT SIZE Ø C MOUNTING RING (optional) Duct Size or Opening A B C D E F G H 6½ 67⁄32 719⁄32 6 1½ 311⁄16 53⁄16 215⁄16 6¼ 83⁄8 831⁄32 913⁄16 731⁄32 1¾ 411⁄16 67⁄16 315⁄16 8¼ 11 ⁄8 11 ⁄8 23 12 ⁄32 19 10 ⁄32 3¾ 6¾ 10½ 5½ 10¼ 9 12 ⁄16 13 ⁄8 3 14 ⁄16 1 12 ⁄16 15 4 ⁄32 27 7 ⁄32 5 12 ⁄16 6½ 12¼ 167⁄8 1717⁄32 18¾ 16¼ 513⁄32 99⁄16 1431⁄32 91⁄32 16¼ 19¼ 20 ⁄8 21 ⁄16 18 ⁄32 5 ⁄32 11 ⁄32 17 ⁄16 12 ⁄32 20¼ 1 7 3 1 1 19 17 17 1 All dimensions are in inches 7 diffusers PERFORMANCE DATA Nominal Size 6 8 10 12 16 20 Nozzle Velocity, fpm Velocity Pressure, IN WG Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Airflow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT 750 0.035 40 0.05 6-12-21 60 0.04 6-13-26 120 0.04 9-19-37 170 0.04 11-22-44 340 0.04 16-32-63 610 0.04 21-43-84 1000 1250 1500 0.062 0.097 0.140 50 60 70 0.08 0.12 0.16 7-15-24 9-17-26 10-20-28 90 110 130 0.08 0.13 0.18 10-19-32 12-24-36 14-27-39 170 210 250 0.08 0.12 0.17 13-26-44 16-33-49 19-38-54 230 290 350 0.08 0.12 0.17 15-30-51 19-38-58 23-45-63 450 560 670 0.08 0.12 0.17 20 21-42-72 26-53-80 32-62-88 810 1020 1220 0.07 0.12 0.17 21 28-57-97 36-71-108 43-84-119 • All pressures given are in inches of water • Throw values given are for terminal velocities of 200, 100 and 50 fpm and for isothermal conditions. See the section, Engineering Guidelines for additional throw information. • The throw values listed are without ceiling effect • For throw values with ceiling effect apply a correction factor of 1.4 • To obtain static pressure, subtract the velocity pressure from the total pressure 1750 2000 2500 0.191 0.249 0.390 80 90 120 0.21 0.27 0.48 22 12-21-30 13-23-32 17-26-37 150 170 210 0.23 0.30 0.46 20 23 28 16-29-42 18-31-44 23-35-49 290 330 410 0.23 0.30 0.46 21 27 22-41-58 26-44-62 32-49-69 400 460 580 0.23 0.30 0.48 20 23 29 26-48-68 30-51-73 38-58-82 780 900 1120 0.23 0.30 0.46 24 27 33 37-67-95 42-72-102 53-80-114 1420 1630 2040 0.23 0.30 0.47 25 28 34 50-90-128 57-97-137 71-108-153 3000 0.561 140 0.65 26 20-28-40 260 0.70 33 27-39-55 500 0.69 32 38-54-76 690 0.68 33 45-63-89 1340 0.67 38 62-88-124 2440 0.67 39 84-119-168 3500 4000 0.764 0.998 160 190 0.85 1.20 30 34 21-30-43 23-33-47 300 340 0.93 1.20 37 40 29-42-59 31-44-63 580 660 0.93 1.20 36 39 41-58-82 44-62-87 810 920 0.93 1.20 37 40 48-68-97 51-73-103 1570 1790 0.91 1.19 42 45 67-95-134 72-102-144 2850 3260 0.92 1.20 43 46 91-128-181 97-137-194 Redefine your comfort zone. ™ | www.titus-hvac.com TND-AA F • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10 dB, re 10-12 watts • Dash (-) in space denotes an NC value of less than 20 • Actual performance, with flexible duct inlet, may vary. See the section, Engineering Guidelines for additional information. PERFORMANCE DATA F211 Redefine your comfort zone. ™ | www.titus-hvac.com Concentric Supply / Return Diffusers CSR / CSR-P • The Titus CSR Series is designed to maximize the performance of a combine supply/return diffuser • Supply and return air is handled through one air device • The CSR and CSR-P are compatible with unitary package equipment from 2½ to 25 tons • The CSR-P shown in the figure is ideal for applications requiring a system that provides equal distribution on all four sides while maintaining low noise levels. It may be installed in a T-bar ceiling or plaster ceiling, or duct mounted in an open area. • Features and benefits of the CSR and CSR-P diffusers include: xx Four-way horizontal airflow xx Low noise, low pressure performance xx Anti-smudging characteristics xx Aluminum diffuser and return air eggcrate xx Lightweight design F xx Built-in hanging support for easy installation AVAILABLE MODELS: CSR / without Plenum CSR-P / with Plenum FINISH Standard Finish - #26 White OVERVIEW Combination Supply / Return / High Capacity CSR / CSR-P The Titus CSR Series is designed to maximize the performance of a combination supply/return diffuser. Supply and return air is handled through one air device. F212 F212 diffusers CSR / CSR-P • Large commercial buildings, warehouses, and retail stores will find the CSR-P the prime selection for single point air distribution systems. Titus provides the entire plenum and diffuser in one piece. The assembled CSR-P unit makes for an easy, low cost installation. See website for Specifications diffusers DIMENSIONS Module Size ¼ S R 1¾ Redefine your comfort zone. ™ | www.titus-hvac.com CSR / CSR-P UNIT DIMENSIONS F Module Size Supply Duct S Return Duct R 2½ - 5 6 - 10 10 - 15 15 - 25 48 x 24 48 x 36 48 x 48 60 x 60 46¾ x 22¾ 46¾ x 34¾ 46¾ x 46¾ 58¾ x 58¾ 361/8 x 121/8 3211/16 x 2011/16 291/8 x 291/8 3711/16 x 3711/16 All dimensions are in inches DIMENSIONS Nominal Tonage F213 diffusers Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS CSR / CSR-P UNIT DIMENSIONS F G F D E 115/16" E Hangar Brackets C A F B Module Size A B C 48 x 24 47 22 /16 23 13 D E F G /16 22½ 12¼ 11½ 1715/16 E F 15 G H G 115/16" Hanger Brackets F D E C B DIMENSIONS A F214 F214 Module Size A B C D E F G H 48 x 36 47 35 2315/16 415/16 177/8 31/8 39/16 277/8 48 x 48 47 47 2315/16 415/16 177/8 31/8 59/16 357/8 60 x 60 59 59 2315/16 415/16 237/8 31/8 59/16 477/8 All dimensions are in inches diffusers PERFORMANCE DATA 48 x 24 inches 48 x 36 Inches 48 x48 Inches 60 x 60 Inches Airflow, cfm Total System Static Pressure (Inches WC) Supply Static Pressure (Inches WC) Return Static Pressure (Inches WC) NC (Noise Criterion) Throw, Feet Airflow, cfm Total System Static Pressure (Inches WC) Supply Static Pressure (Inches WC) Return Static Pressure (Inches WC) NC (Noise Criterion) Throw, Feet Airflow, cfm Total System Static Pressure (Inches WC) Supply Static Pressure (Inches WC) Return Static Pressure (Inches WC) NC (Noise Criterion) Throw, Feet Airflow, cfm Total System Static Pressure (Inches WC) Supply Static Pressure (Inches WC) Return Static Pressure (Inches WC) NC (Noise Criterion) Throw, Feet Note: Data for 48" x 24" and 48" x 36" is for long side only, for short side performance, multiply by .7 1000 1500 2000 2500 0.13 0.29 0.51 0.79 0.05 0.12 0.21 0.33 -0.08 -0.17 -0.30 -0.47 14 10-14-20 24 14-18-25 31 17-20-29 36 19-23-32 1500 2000 2500 3000 3500 4000 4500 5000 0.07 0.13 0.20 0.29 0.40 0.52 0.65 0.81 0.04 0.08 0.12 0.17 0.23 0.30 0.38 0.47 -0.03 -0.05 -0.09 -0.12 -0.17 -0.22 -0.28 -0.34 19 12-18-25 25 16-20-29 30 19-23-32 34 20-25-35 37 22-27-38 40 23-29-41 43 25-31-43 45 26-32-46 2000 2500 3000 3500 4000 4500 5000 5500 6000 0.08 0.12 0.17 0.23 0.30 0.38 0.47 0.57 0.68 0.04 0.06 0.08 0.11 0.15 0.19 0.23 0.28 0.33 -0.04 -0.06 -0.09 -0.12 -0.15 -0.19 -0.24 -0.29 -0.34 17 13-20-29 23 17-23-32 28 20-25-35 32 22-27-38 35 23-29-41 38 25-31-43 41 26-32-46 44 28-34-48 46 29-35-50 3000 4000 5000 6000 7000 8000 9000 10000 0.07 0.12 0.19 0.28 0.38 0.49 0.63 0.77 0.04 0.08 0.12 0.17 0.24 0.31 0.39 0.48 -0.03 -0.05 -0.07 -0.11 -0.14 -0.19 -0.24 -0.29 22 16-25-35 31 22-29-41 38 26-32-46 43 29-35-50 48 31-38-54 52 33-41-54 55 35-43-61 59 37-46-64 F PERFORMANCE DATA • NC based on a room, 68 x 80 x 14 feet with the receiver located 9 feet from the diffuser • Total System Static Pressure is the sum of the supply static pressure and the return static pressure • Throw is listed as the distance in feet to terminal velocities of 150, 100 and 50 fpm under isothermal conditions Redefine your comfort zone. ™ | www.titus-hvac.com CSR-P COMBINATION SUPPLY/RETURN F215 Notes diffusers

DIFFUSER Pompa sentrifugal adalah pompa yang memiliki elemen utama berupa motor penggerak dengan sudu impeller yang ber

Soft, durable backboard padding is made from high density polyurethane foam with a tough outer skin to help buffer the vibration those slams and dunks can ...

K&S Brass Tubing Assortment, Square & Rectangle (11 pcs) KNS3406. ... K&S Brass Tubing Assortment, Square & Rectangle (11 pcs) KNS3406.. £28.40. Supplier ...

2007-02-26. 1 fcu mab60c2600l titus 15 sunbelt en 1ftu c-9 dtqp titus 2 sunbelt en 1 ftu c-10 dtqp titus 1 sunbelt en 2 ftu p-1 andp-8 dtqp titus 1.5 sunbelt en.

7" Wire Stripper/Cutter/Crimper Red | PWCS7ACF | Snap-on Store. 방문하기. 저장. 방문하기. 저장. 유사한 핀 더 보기.

To find out more about managing your money, you can visit Money Advice Service, an independent service set up to help people manage their money.

AMI Financial Solutions Limited. Company Number: SC533818, Trading Address: Unit 1017, Mile End Mill, Abbey Mill Business Centre, 12 Seedhill Road, Paisley, PA1 1JS,Authorised & Regulated by the Financial Conduct Authority.

7 Jun 2020 — Mr Men resources. Perfect for a well-being/mental health display in KS1/KS2 classrooms.

Greenheck Fan Corporation ; Spun Aluminum Gravity Ventilator, Size 10, Model GRS-10 · 9 in Troy · $422.00 ; Spun Aluminum Gravity Ventilator with Flashing Flange, ...