Nvg asianfit goggles

The CBK-109F drive card is available in two options, the CBK-109FP (PNP signal inputs and outputs) and the CBK-109FN (NPN signal inputs and outputs). The CBK-109F features adjustable speeds as well as acceleration and deceleration time.

Nvg asianfit

The IB-E03B is available in two options, the IB-E03BP (PNP signal inputs and outputs) and the IB-E03BN (NPN signal inputs and outputs).  The IB-E03B is our Ethernet/IP capable driver card, which allows for complete configuration control.  This card also allows for Rockwell Automation Add-On-Profile configuration.

The CB-016 comes in multiple options, the CB-016S7 (NPN inputs, PNP outputs), CB-016N7 (NPN inputs and outputs), and CB-016P7 (PNP inputs and outputs). The CB-016 is the most basic of our driver card offerings allowing for on/off functionality.

Simply plug an Itoh Denki driver card into an Itoh Denki motorized conveyor roller for a hassle-free material handling experience.

The HB-510 is available in two options, the HB-510P (PNP signal inputs and outputs) and the HB-510N (NPN signal inputs and outputs). The HB-510 is our hybrid controller, which utilizes Zero Pressure Accumulation capabilities to prevent package collisions on a conveyor line.

The IB-E04F is available in two options, the IB-E04FP (PNP signal inputs and outputs) and the IB-E04FN (NPN signal inputs and outputs). The IB-E04F is a dual-zone, Ethernet/IP capable drive card, allowing for complete control. The IB-E04F also allows for Rockwell Automation Add-On Profile configuration.

A driver card, also known as a control board, control card, drive card or hybrid board is the “driving force” behind motor driven roller conveyors.

Click the pin in your region to be redirected to your Itoh Denki website. If you are located in North or South America, click the X on the right to continue to itohdenki.com.