The StarTech Thunderbolt 3 TB3DKM2HDL Docking Station is a compact mini dock, delivering essential connections for productivity. The bus-powered dock connects dual 4K HDMI displays, Gigabit Ethernet, and two USB-A (USB 3.2 / 2.0) ports and for flexible set up, the attached Thunderbolt 3 cable has an extended length of (11 in./ 28 cm). The StarTech Thunderbolt 3 supports 40 Gbps of throughput and 4K resolution at 60Hz on dual HDMI monitors, through a single Thunderbolt™ 3 port.

If your headphone port is located near the end of the bed, furthest from the magnet area, then you will need the longer tubes that come with our NRH-SYM adapter. Most will not need the full 2 meter length tubing, and that will be trimmed back in order to optimize the sound quality. If your headphone port is located closer to the magnet (on the side of the patient bed), then you will want to order the NRH-ADP adapter, because that adapter does not need require any additional tubing to reach all the way inside the magnet.

• 40 Gbps video & data throughput, dual monitor 4K 60Hz HDMI output, 2-Port USB-A Hub (1x USB 3.1 Gen 1 5Gbps & 1x USB 2.0) & Gigabit Ethernet port w/ PXE boot and WoL. • This bus-powered, portable thunderbolt 3 mini dock is designed for shared and small workspaces; Use this Thunderbolt 3 multiport adapter for work from home or on-the-go/travel use. • No drivers; TB3 dock works w/ MacBook Pro 13, 16 and Air (extended dual displays on MacBook Pro/Air w/ Intel processor & single display w/ Apple M1 Chip), Windows-based TB3 laptops like Dell XPS, HP EliteBook, Lenovo X1 Carbon. • For users who need to use their laptop power adapter as they require 100W or more to keep their laptop charged; but still want Thunderbolt 3 dock performance & functionality.

• Product Type: Docking Station • Ethernet Technology: Gigabit Ethernet • Operating System Supported: Windows, macOS • Weight (Approximate): 144.6 g • Colour: Grey, Black • Device Supported: Notebook • Connectivity Technology: Wired • Number of Displays Supported: 2 • Supported Resolutions: 4096 x 2160, 3840 x 2160 • Screen Mode Supported: 4K • Host Interface: Thunderbolt 3 • HDMI: Yes • Number of HDMI Ports: 2 • Network (RJ-45): Yes • Total Number of USB Ports: 2 • Number of USB 2.0 Ports: 1 • Number of USB 3.0 Ports: 1 • Thunderbolt: Yes • USB Type-C: Yes • USB Type-C Detail: 1 - Thunderbolt™ 3 USB-C (24-pin) (40Gbps) Male • USB Type-A: Yes • Compatibility: Notebooks: Dell XPS, Apple MacBook Pro

The NRH-ADP acoustic headphone adapter is designed for use on the Siemens MRI scanners. Most have a built-in patient sound system and the headphone connector port resembles a 90-degree plastic plug. There are two different possible locations for the headphone port. The older Siemens units positioned the headphone port on the side of the patient bed, fairly close to the magnet entry. Most of the newer Siemens MRI units positioned the headphone port further away from the magnet, at the foot-end of the patient bed. We have two different adapters and these should be selected based on the location of that connector port.

JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

The StarTech Thunderbolt 3 TB3DKM2HDL Docking Station is designed for shared and small workspaces. It works w/ MacBook Pro 13, 16 and Air, Windows-based TB3 laptops like Dell XPS, HP EliteBook, Lenovo X1 Carbon.